Latest pivot Tenders | Government pivot Tenders

Central Government/Public Sector

CTN :45313284

02 Jun, 2026 NA

Harnaut - Bihar

Tender For auction sale of depot ferrous scrap - scrap steel casting ( drag boxes centers castings stretcher casting pivot cbc components, knuckles axle boxes & buffer cases, rubbing blocks etc. [our offer:- scrap axle box housing],i lot no-ea982605014 ,location- near wheel bogie park

Central Government/Public Sector

CTN :45313285

02 Jun, 2026 NA

Harnaut - Bihar

Tender For auction sale of depot ferrous scrap - scrap steel casting ( drag boxes centers castings stretcher casting pivot cbc components, knuckles axle boxes & buffer cases, rubbing blocks etc. [our offer:- scrap brake disc],i lot no-ea982605013 ,location- besides & in front of new lhb store

Central Government/Public Sector

CTN :45289245

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1. nr-094966 accnh/rcf 2. wc-081342 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/10/0037. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45289246

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-nr-081086/ accnh /rcf 2-wc -081488 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/10/0038. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

State Government

CTN :44948938

09 Jun, 2026 NA

Gandhinagar - Gujarat

Tender For corrigendum : supply of primary cleaner equipped with polyurethane blade and heavy duty spring tensioner system for conveyor belt width 1400mm , secondary cleaner with segmented tungsten carbide c- tips and dual side heavy duty spring tensioner system for conveyor belt width 1400mm. , carrying tracker with pivot and tilt frame movement with bouble side flexible dual sensor and flexible adjusting arm for conveyor belt width 1400mm. , return tracker with pivot and tilt frame movement with bouble side flexible dual sensor, guide rollers and flexible adjusting arm for conveyor belt width 1400mm. , v plow internal cleaner with uhmw p blade with self adjusting turnback system for 1400 mm conveyor belt

State Government

CTN :45287304

11 Jun, 2026 NA

Akola - Maharashtra

Tender For procurement of boiler tube attachment spares for aoh of 250 mw unit-3 at paras tps. - ss 304 straight shield 1 m l & 2 mm th f, ss 304 straight shield 1 m l & 2 mm thic, ss 304 straight shield 1 m l & 2 mm th f, half round (straight) 1 mtr l and 2mm th, ss 304 shield 90 deg bend with l 600 mm, blr tbatta 0 0 size 44.5 mm, tilt mechanism assy sq headed pivot pin, carbon steel flat sa-210 gr-c 12 x 5 mm, id 80 mm; od 90 mm and l 140 mm of ss-31, ss round rod locking of cassette baffle, ww trapezoidal bar 30x10x20 in 200 mm l

State Government

CTN :45300981

02 Jun, 2026 5.67 Crore

Wardha - Maharashtra

Tender For supplying of furniture to newly formed cgrf office, for jr. law officer and mini training centre under o&m circle wardha tq. dist. wardha.-providing, supplying and placing of godrej make beat fabric high back 1.00chair with head rest. seat/back assembly: the seat & back is made up of1.2 ± 0.1cm thk. hot pressed plywood measured. upholstered with knittedfabric , over moulded high resilience polyurethane foam high back size:51.8 cm. (w) x 75.2 cm. (h) seat size : 49.0 cm. (w) x 48.8 cm. (d) highresilience (hr) polyurethane foam: the hr polyurethane foam ismoulded with density = 55+/-2 kg/m³ and hardness 16 ± 2 kgf as per is:7888for 25% compression. armrests: the adjustable armrest is designed with thefollowing features: • up-down adjustment– 8 steps (8.0±0.5 cm range) • heightadjustable armrest structure which is powder coated & fitted with an armresttop. • fixed armrest top is pu moulded over metal insert. front pivotsynchro mechanism: the adjustable tilting mechanism is designed with thefollowing features360° revolving type. • single point control. • front-pivot fortilt with feet resting on ground ensuring more comfort. • tilt tensionadjustment. • 4-position locking with anti-shock feature. • seat/back tiltingratio of 1:2 . back height adjustability: back can be adjusted in 5 positionsby manually. stroke of height adjustable spine is 7 cm. back height adjustabilityis applicable for high back and mid back chair. pneumatic heightadjustment: the pneumatic height adjustment has an adjustment stroke of10.0 ± 0.3 cm. pedestal assembly with castors: the pedestal is injectionmoulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheelcastors. the pedestal pitch-centre dia is ø66.1 ± 0.5 cm. (76.1 ± 1.0 cm. withcastors) . twin wheel castors: the twin wheel castors are injectionmoulded in black nylon. option of sliding seat mechanism: seat can beslide horizontally as per user convenience. stroke of seat slide is 5 cm. thisoption is available for revolving pedestal type of chair. overall dimensions ofchair seat height - min 45.0 to max 55.0cm. height - min 102.0 to max 119.0cm. width & depth of chair as measured from p

Central Government/Public Sector

CTN :45098931

28 May, 2026 14.80 Lacs

Morbi - Gujarat

Tender For corrigendum : supply of fiber optical light cable with straight connector , suction irrigation tube , cup forcep straight , cup forcep rt turn , cup forcep lt turn

corporations/Associations/Others

CTN :45046708

13 Jun, 2026 5.54 Crore

Multi City - Karnataka

Tender For corrigendum : supply of air suspension parts to the divisions of the nwkrtc. - nw-26-washer 22 mm - shock absorber , nw-26-washer 18 mm - shock absorber , nw-26-volvov air bellows, nw-26-volvo shock absorber-4, nw-26-volvo shock absorber-3, nw-26-volvo shock absorber-2, nw-26-volvo shock absorber-1, nw-26-volvo rubber bushing (shock absorber rubber bush), nw-26-volvo mounting plate air spring upper, nw-26-volvo gas spring side hatch 700n, nw-26-volvo bump stop, nw-26-volvo bellows-3, nw-26-volvo bellows-2, nw-26-volvo bellows-1, nw-26-volvo air spring (front bellow assy), nw-26-volvo air spring, nw-26-volvo air bellows-2, nw-26-volvo air bellows-1, nw-26-ud special nut bolt - engine, nw-26-ud rubber bushing, nw-26-ud bush - rear reaction top rod (75mm bush), nw-26-ud rear reaction rod top (rear v stay), nw-26-ud bush (v bar 85mm bush) - rear reaction rod , nw-26-ud rear reaction rod, nw-26-ud rubber spring - rear anti-roll bar , nw-26-ud reaction rod (front v stay), nw-26-ud reaction rod, nw-26-ud link rod - front (u bar), nw-26-ud front shock absorber assy, nw-26-ud bush (66mm) - front reaction rod , nw-26-ud front reaction rod, nw-26-ud front link rod, nw-26-ud bushing - front anti roll bar, nw-26-ud front and rear shock absorber, nw-26-ud ecas distance sensor, nw-26-ud connecting pin, nw-26-ud clamp (hanging bush), nw-26-ud bumper block, nw-26-ud altitude valve control rod assembly-3, nw-26-ud altitude valve control rod assembly-2, nw-26-ud altitude valve control rod assembly-1, nw-26-ud air spring (bellow) rear, nw-26-ud air spring (bellow) front, nw-26-tata/ley taper pivot bolt , nw-26-tata/ley connecting rod , nw-26-tata spherilastic bush taper lpo 1616, nw-26-tata bs6 shock absorber front, nw-26-tata bs6 bush/cut bush set - rear anti roll bar, nw-26-tata bs6 bush - rear anti roll bar , nw-26-tata bs6 bush - front anti roll bar, nw-26-taper sleeve, nw-26-steel piston 12 inch - single hole, nw-26-steel piston 12 inch - double hole, nw-26-spring washer - m16 , nw-26-split pin 3/16 x 2 1/2, nw-26-ley slf shock absorber-2, nw-26-rubber washer - bump stop, nw-26-rubber connector assly, nw-26-rubber bush - shock absorber , nw-26-rear axle sub compound link tc, nw-26-nylon tube - 8mm , nw-26-nylon tube - 6mm , nw-26-nylock nut - m16x2 , nw-26-nylock nut, nw-26-male elbow m12x1.5mm, nw-26-male connector, nw-26-machined washers - m24 , nw-26-machined washers , nw-26-machined washer ms - m16 , nw-26-m.bolero rear shock absorber, nw-26-m.bolero front shock absorber, nw-26-ley bs4 support bracket lh , nw-26-ley bs4 spherilastic bush, nw-26-ley slf u bolt m24x1.5x378mm, nw-26-ley slf suspension bolt (special bolt half threaded), nw-26-ley slf suspension bolt, nw-26-ley slf spigot , nw-26-ley slf spherilatic bush with pin , nw-26-ley slf shock absorber-1, nw-26-ley slf nyloc nut - m24x1.5 , nw-26-ley slf nut - suspention bolt, nw-26-ley slf anti roll cut bush rear , nw-26-ley slf alien bolt - m16x2x130mm, nw-26-ley bs4 shock absorber front 6.5t, nw-26-ley bs4 shock absorber, nw-26-ley midi bs4 stablizer holder asm, nw-26-ley midi bs4 bush - rubber-2, nw-26-ley midi bs4 bush - rubber-1, nw-26-ley midi bs4 rear shock absorber assy, nw-26-ley midi bs4 pull rod assy with bush , nw-26-ley midi bs4 front shock absorber assy, nw-26-ley midi bs4 bracket - suspension holder, nw-26-ley bs4 front shock absorber, nw-26-ley bs4 dowtee washer m26, nw-26-ley bs4 coller bush, nw-26-ley bs6 solenoid ptfc24v, nw-26-ley bs6 rear shockabsorber plate, nw-26-ley bs6 pallakki bellow air spring, nw-26-ley bs6 front shock absorber bottom-2, nw-26-ley bs6 front shock absorber bottom-1, nw-26-ley bs4 rubber pad assly, nw-26-ley bs4 retaining plate, nw-26-ley bs4 rear rubber air bellow 12 inch, nw-26-ley bs4 m16 spring washer , nw-26-ley bs4 levelling valve repair kit, nw-26-ley bs4 levelling valve assy , nw-26-ley bs4 air leveling valve lever, nw-26-ley bs4 air spring assly , nw-26-tata bs3 hex nut - m16x2, nw-26-tata bs3 hex bolt with nut -m16x2x100, nw-26-tat

corporations/Associations/Others

CTN :45146780

06 Jun, 2026 9.30 Lacs

Thiruvananthapuram - Kerala

Tender For corrigendum : supply of instruments for vats (video assisted thoracic surgery) - trocar,size11mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size6mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size11mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size13mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size6mm, trocar with blunt tip, with 45 luer-lock connection for insufflations, 11mm, working length 8.5cm, parenchymal forceps, atraumatic, straight jaws, single action jaws, size 5mm, length 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, lung forceps, dismantling, atraumatic, curved jaws, fenestrated single-action jaws in 5mm 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, parenchymal forceps, atraumatic, double curved jaws, size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung forceps, atraumatic, fenestrated, single curved jaws ,size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung nodule forceps, atraumatic, fenestrated, curved jaws, single action jaws, size 5 mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, grasping forceps, cobra-jaws, 1x2teeth, straight jaws, single action jaws, size5mm, length 28cm, consisting of: metal handle with 4 locking positions outer tube with working insert, clickline parenchymal forceps, atraumatic, dismantling, without connector pin for unipolar coagulation, single action jaws, single curved jaws, size 5 mm, length 28 cm, consisting of: metal handle along with outer sheath with forceps insert, for use with linear staplers., grasping forceps, rotating, with connectorpinforunipolarcoagulation,size5mm,length30 cm, atraumatic, fenestrated, curved, single action jaws, consisting of plastic handle, without ratchet, with larger contact area, outer tube insulated & insert, kelly dissecting and grasping forceps dismantling, curved jaws, double action jaws, size 5mm, length 28 cm, consisting of: metal y-handle, with absorber1 geometry, axial, with 4 locking positions, outer tube with forceps insert, scissors insulated, straight jaws, curved scissor-blades, double action jaws, size5mm ,length 28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, curved scissor-blades, scissor blades open horizontally to angulation, double action jaws, size5mm, length28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, straight scissor-blades, scissor blades open parallelly to angulation, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, biopsy forceps, insulated, distally angled outer sheath, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, suction-coagulation cannula, with connector pin for unipolar coagulation with handle,size5 mm, length 28-30 cm in both distally angled sheath and straight sheath option, coagulating and dissecting electrode, l-shaped, insulated, with connector pin for unipo

Pivot Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors