Latest planet wheel Tenders | Government planet wheel Tenders

Central Government And Public Sector

CTN :45556380

26 Jun, 2026 NA

Bangalore - Karnataka

Tender For sun planetary gear assembly for main hoist gearbox as per rwf drawing no.711014413500. the assembly includes all the items with quantity as indicated against each item in the above rwf drawing which is as below. (1) sun pinion shaft rwf drawing no.711014412700 qty-1 no. (2) gear housing rwf drawing no.711014413510 qty -2 nos. (3) pin & key pin rwf drawing no.711014411930 qty - 2 nos. (4) planet wheel rwf drawing no.721014412690 qty -2 nos. (5) gear rwf drawing no.711014412710 qty -1 no. (6) spider arm rwf drawing no.711014413490 qty -1no. (7) pinion rwf drawing no.701014413540 qty - 1 no. (8) spacer rwf drawing no.701014411950 item no.1 qty -4 nos. (9) spacer rwf drawing no.701014411950 item no.2 qty -2 nos. (10) pinion shaft rwf drawing no.721014410320 qty - 01 no. (11)the supply should also include sl.no 10 to 21 with quantity against each item as mentioned in the drawing. note: (1)the item should be supplied as complete set in assembled condition. (2) mtc for chemical composition and hardness should accompany the supply. (3) all the gears teeth should be profile ground. (4)the firm shall be a manufacurer of heavy engineering gears/gearbox and shall have inhouse facilities for such gear manufacturing. proof of the same shall accompany the offer. (5)the firm should have manufactured and supplied sun planetary gear of diameter 600mm and abovefor eot cranes of main hoist lifiting capacity 35ton and above to any of the government/ public sector/pvt. ltd. companies.(documentary evidence in proof of supply for at least one supply in the last three years should be furnished along with the offer). (6)the supply shallbe guaranteed for quality, workmanship and performance for minimum period of 12 monthsfrom the date of fitment. (7)firms should have certification for iso, iris and other standards revelant to quality and manufacturing. (8) offers not meeting the above requirements shall summarily be rejected. ]

Central Government/Public Sector

CTN :45423059

24 Jun, 2026 NA

Dhanbad - Jharkhand

Tender For supply and commissioning of hydraulic operated lifting trolley with capacity 2 ton capacity for loading and unloading of cbc draft gear. technical data: single cylinder,platform size:750x600x200 mm, fixed lifiting height: 500 mm, height after lifting:1200 mm, moveable type polymer wheel: 180x50 mm, withtest certificate. along with additional handle, 3 sets of seal kit, spare hydraulic oil for top up, heavy duty & smooth operation. make: habbis or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45391473

10 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of sun planetary gear assembly for main hoist gearbox as per rwf drawing no.711014413500. the assembly includes all the items with quantity as indicated against each item in the above rwf drawing which is as below. (1) sun pinion shaft rwf drawing no.711014412700 qty-1 no. (2) gear housing rwf drawing no.711014413510 qty -2 nos. (3) pin & key pin rwf drawing no.711014411930 qty - 2 nos. (4) planet wheel rwf drawing no.721014412690 qty -2 nos. (5) gear rwf drawing no.711014412710 qty -1 no. (6) spider arm rwf drawing no.711014413490 qty -1no. (7) pinion rwf drawing no.701014413540 qty - 1 no. (8) spacer rwf drawing no.701014411950 item no.1 qty -4 nos. (9) spacer rwf drawing no.701014411950 item no.2 qty -2 nos. (10) pinion shaft rwf drawing no.721014410320 qty - 01 no. (11)the supply should also include sl.no 10 to 21 with quantity against each item as mentioned in the drawing. note: (1)the item should be supplied as complete set in assembled condition. (2) mtc for chemical composition and hardness should accompany the supply. (3) all the gears teeth should be profile ground. (4)the firm shall be a manufacurer of heavy engineering gears/gearbox and shall have inhouse facilities for such gear manufacturing. proof of the same shall accompany the offer. (5)the firm should have manufactured and supplied sun planetary gear of diameter 600mm and abovefor eot cranes of main hoist lifiting capacity 35ton and above to any of the government/ public sector/pvt. ltd. companies.(documentary evidence in proof of supply for at least one supply in the last three years should be furnished along with the offer). (6)the supply shallbe guaranteed for quality, workmanship and performance for minimum period of 12 monthsfrom the date of fitment. (7)firms should have certification for iso, iris and other standards revelant to quality and manufacturing. (8) offers not meeting the above requirements shall summarily be rejected. ]

corporations/Associations/Others

CTN :45321766

15 Jun, 2026 45.73 Lacs

Paonta Sahib - Himachal Pradesh

Tender For procurement of electrical spares and consumables for 220 kv and 33kv switch yard at khodri power station - 245 kv lightening arrester, discharge current 10ka, frequency 50 hz,pressure relief class 40 ka(rms), long duration discharge class 3, m.c.o.v. 56 kv, make: oblum electrical industries pvt. ltd. /cg power and industrial solution ltd. or eq make as approved by engineer in charge., 145 kv lightening arrester outdoor type ,suitable for 145kv system voltage , discharge current 10ka, freq. 50 hz, high current impulse (4/10 s) 100 ka, rated lightning impulse withstand voltage 1.2/50 s - 650 kvp, polymer based (single phase) make-oblum electrical industries pvt. ltd. /cg power and industrial solution ltd,/ htachi / siemens india ltd or eq make as approved by engineer in charge., auxiliary switch (stack) 5no + 5nc, 220v, dc, make: crompton, hitachi or eq make as approved by engineer in charge for 220kv cgl make sf6 circuit breaker., surge monitor/surge counter with leakage current meter suitable for 220 kv lightening arrestor , make: cg power and industrial solution ltd./ oblum electrical industries pvt. ltd., 33kv ct indoor type , 3 core, 15va each, ratio 650-350/1 a + 1a , class 0.2s(2 core metering) & 5p10 (protection), str: 25ka for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge., 33kv ct indoor type, 3 core, 15va each, ratio 300-150/1 a + 1a , class 0.2s( 2 core metering) & (5p10 protection, str: 25ka, for 3 sec. make siemens, crompton, hitachi or eq make as approved by engineer in charge, control motor, type c21, 2.6 a, 230v ac/dc, o/p 0.3kw, sr. no: 042-901, m/y 03/08, 750/ min. make: kpt shirol or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 7no+6nc (stack), 250 volt dc, make: crompton, hitachi or eq make as approved by engineer in charge for 33kv cgl make indoor type sf6 circuit breaker., auxiliary switch 8no+ 8nc, 220v, dc, (motor drive ). make: abb/ hitachi or eq make as approved by engineer in charge for 245 kv, abb make isolator., 220 v, dc, close or trip-1 coil ( part no. exin - 400834 - r9)make: abb/hitachi or eq make as approved by engineer in charge for 145kv, abb make sf6 breaker., rectifier 15 a, 220 v, ac (part no. 1hyn-450040p1 ) make: abb/ hitachi or eq make as approved by engineer in chargefor 245kv, abb make isolator, mcb (2 pole,3a, 220v, dc ), over current earth fault relay, mc61a-nx, cat no : mc61anx2200, make: l&t electrical & automation, or eq make as approved by engineer in charge for 33kv sf6 braeker., 33kv busbar support insulator (epoxy) . make: universal engg. corporation,star electrical engg. works or eq make as approved by engineer in charge.(as per sample), epoxy bushing/ fixed contact of "r","y" &"b" phase bottom side for 33kv cgl make panel (as per sample), epoxy bushing/ fixed contact "r","y" &"b" phase top side for 33kv cgl make panel (as per sample), ratech wheel of 33kv sf6 breaker, cgl make, flexible contact of 33kv sf6 breaker finger, cgl make (as per sample), silica gel blue crystal in mesh size of 15 mm to 35 mm duly packed in poly lined moisture proof m s drums/carton, heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 400mm ,33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- 185 mm 33 kv xlpe cable for indoor application (make 3m/raychem/ densons)., heat shrinkable cable terminal kit for 3- , 185 mm 33 kv xlpe cable for outdoor application (make 3m/raychem/ densons)., p g clamp deer/panther for 220 kv conductor, p g tclamp deer/ zebra, for 220 kv conductor, p g clamp deer/ trantulla for 220 kv conductor, p g clamp tarantula/ trantulla for 220 kv conductor, p g clamp deer/deer for 220 kv conductor, p g clamp made of aluminum-alloy suitable for zebra to trantulla conductor with 4 nos bolt - n

Central Government/Public Sector

CTN :45281601

18 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For annual sectional contract for repairs & maintenance work and supply of material under aden/ hq-ii /jhs for year 2026-27 a) zone no-2a-2 jhs (railway station & circulating area) b) zone no-2a-3 jhs - stone aggregate (single size): 10 mm nominal size, bitumen emulsion, portland cement (opc-43 grade), white cement, c.p. brass extension nipple (15mm x 50 mm), oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, anodised aluminium butt hinges 100x63x3.2, anodised aluminium sliding door bolt 250x16 mm, anodised aluminium tower bolt (barrel type) 200x10 mm, anodised aluminium tower bolt (barrel type) 150x10 mm, anodised aluminium handles 125 mm with plates 175 x 32 mm, satna lime, acrylic distemper 1st quality, haing voc content less than 50 grams/liter, premium plastic acrylic emulsion of interior grade, having voc content less than 50 grams/liter, aluminium paint, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, coursed sand (zone iii), structural steel such as tees, angles channels and r.s. joists, galvanised steel or l hooks 8 mm dia, bolts and nuts up to 300 mm in length, 18 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c., mirror of superior make glass 60x45 cm, pig lead, gl pipes 15mm dia, gl pipes 20 mm dia, gl pipes 25mm dia, gi union 15mm nominal bore, gi union 20mm nominal bore, gi union 25mm nominal bore, gi union 50mm nominal bore, white plastic seat isolid) with lid c.p. brass hinges and rubber buffers, shower rose c.p. brass for 15 to 20 mm inlet 100 mm dia, shower rose c.p. brass for 15 to 20 mm inlet 150 mm dia, h.p. or l.p. ball valve with polythene floats: 15mm dia, h.p. or lp. ball valve with polythene floats: 20 mm dia, h.p. or lp. ball valve with polythene floats: 25 mm dia, full way valve with c.i. wheel (screwed end) brass 125 mm dia, brass full way valve with c.i. wheel (screwed end) 50 mm dia, vitreous china flat back wash basin 550x400 mm, c.p. brass waste 32 mm, c.p. brass waste 40 mm, vitreous china orrisa type w.c. pan of size 580 mm, vitreous china pedestal type water closet, ply wood 5 ply with commercial ply on both faces 6 mm thick, 12 mm commercial ply, common burnt clay f.p.s (non modular) bricks class designation 7.5, weather sealant -non staining (600 ml), c.i. sluice valve (with caps) class ii: 100 mm dia, c.i. sluice valve (with caps) class ii: 150 mm dia, red oxide zine chromate primer, gp-2 cememtitious compound, galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, frosted glass sheet of nominal thickness 4 mm (wighting not less than 10kg/sqm), aluminium hanging floor door stopper with twin rubber & stopper, hydraulic door closer tubular type aluminium section body, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, bottle trap, cp brass single lever telephonic wall mixer of approved make, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 75 mm dia, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 110 mm dia, upvc bend 87.5° 75 mm bend, upvc bend 87.5° 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long nose bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, c.p. brass angle valve 15 mm, binding wire, flushing cistern p.v.c. 10 litre capacity (low level-white) with fittings, accessories and flush pipe, white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556, 15 mm ptmt bib cock, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt push cock 15 mm dia, ptmt pillar cock (fancy) 15 mm foam flow, turpentine oil, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, sbr polymer, premium acrylic exterior paint(p.way training center)

Central Government And Public Sector

CTN :45255147

08 Jun, 2026 NA

Sonitpur - Assam

Tender For supply and commissioning of permanent magnetic metal chips picker mounted on wheels, designed for efficient collection of metal chips from shop floors, tracks, and work areas. the unit shall be robust, and easy to operate. technical specifications: magnet type: permanent magnetic system with high pickup efficiency. overall size(minimum): 914 mm (length) x 100 mm (width). wheel size(minimum): 250 x 50 mm, made of durable nylon/polymer for smooth movement. operating mechanism: manual push-type, wheel-mounted design. release system: quick-release mechanism for easy disposal of collected metal chips without manual contact. construction: heavy-duty, corrosion-resistant body suitable for rugged use. handle: ergonomically designed handle for ease of operation. [ warranty period: 12 months after the date of delivery ] ]

CTN :45045982

21 May, 2026 NA

Pune - Maharashtra

Tender For bid to ras supply of lv7 av 15 278 003 109 852 43 pin of planet wheel , lv7 av 15 578 003 914 352 28 rope sling 4x 1600kg , lv7 av 15 578 903 913 252 28 front suspension , lv7 av 15 273 112 490 541 1 manzeta 55x56 , lv7 av 15 548 241 371 523 94 metal hose clip , lv7 av 15 358 143 401 120 switching unit 101 000 011 001 , lv7 av 15 309 251 000 610 screw m6x10 , lv7 t 815 8x8 485 sk 00117 complete wire harness for hyd portion c , lv7 t 815 12x12 990 100 941 0 injector body cv 28305 15 , lv7 t 815 8x8 2520 72 0306146 yoke universal joint vehicular 130 073 5 , lv7 t 815 8x8 130 076 857 734 tube assy metal 130 076 857 734 , lv7 t 815 8x8 5360 72 0136032 spring helical compression , lv7 t 815 8x8 442 078 742 354 rear cover sheet rh , lv7 t 815 8x8 990 100 953 000 bandwheel 163100142 , lv7 t 815 8x8 130 954 166 24 tools box gasket , lv7 t 815 8x8 130 987 960 144 upper step board rh , lv7 t 815 8x8 130 987 960 134 upper step board lh , lv7 t 815 8x8 272 512 321 000 upper carpet , lv7 t 815 8x8 323 427 150 053 bush ps 1220 ku 14x12x12 , lv7 t 815 8x8 442 054 471 534 clamp , lv7 t 815 8x8 442 076 691 664 switch coupling , lv7 t 815 8x8 273 111 077 000 bent rubber tube , lv7 t 815 12x12 130 028 969 254 control valve holder , lv7 t 815 8x8 443 317 069 109 pump signal lamp , lv7 t 815 8x8 321 821 202 025 protective glass orange , lv7 t 815 8x8 443 612 445 806 1 air reservoir 10l , lv7 t 815 8x8 442 053 990 424 guide insert , lv7 t 815 8x8 273 111 010 014 sealing ring 8x4 csn 0292800 od 35 501v , lv7 t 815 8x8 273 511 136 000 silent blosk 646 csn 63581311612 , lv7 t 815 4x4 207 310 048 4 intermediate lever , lv7 t 815 4x4 443 400 320 000 wind screen electric motor 8tw 005 , lv7 t 815 hmv 207 285 053 4 pair of glass lh , lv7 t 815 hmv 442 072 801 014 front bracket lh , lv7 t 815 hmv 442 072 801 004 front bracket rh , lv7 t 815 hmv 273 111 530 000 rubber bushing , lv7 t 815 hmv 442 050 330 164 insert , lv7 t 815 hmv 442 600 559 000 spring plate , lv7 t 815 hmv 205 069 069 4 ring , lv7 t 815 hmv 336 641 000 000 hose ab 309 8x600dkl dkl pm 21 310 , lv7 t 815 hmv 990 600 313 000 electromagnet 24v , lv7 t 815 hmv 442 170 535 029 trg aggr clutch disc zvs , lv7 t 815 hmv 558 106 750 6 mmu 17401 set up gauge , lv7 t 816 10x10 802 823 010 4 padel arm , lv7 t 816 10x10 443 414 011 0 thermometer cummins , lv7 t 816 10x10 993 100 317 0 hose clip din 3017 b2 134x20 w1 2 , lv7 t 816 10x10 1028207a display , lv7 t 816 10x10 1019922 selector range , lv7 pinaka lcr 944 192 o ring exhaust , lv7 pinaka lcr 105026 bearing garlock , lv7 pinaka lcr 115 003 throtle cable , lv7 pinaka lcr 910 314 pump seal kit , lv8 pinaka lcr til 960884 o ring , lv8 pinaka lcr til x 7750000053 relay model 24v 8ch phonix pc 24d 08 cob , lv8 pinaka lcr til 960882 backup ring , lv8 pinaka lcr til 960886 o ring , lv8 pinaka lcr til 960 883 o ring , lv8 pinaka lcr til 0102030000 rail rv 8050 mm , lv8 pinaka lcr til z 7872000175 switch toggle t 7 on off on mom , lv8 pinaka lcr til 109 200 063 547 command post shelter tarpaulin cover , lv8 pinaka lcr til 960887 o ring , lv8 pinaka lcr til z 7754000026 bsp thread elastic seal ed 3 4 , lv8 pinaka lcr til z 7872000174 toggle switch , lv8 pinaka lcr til 902000157 de spanner 25 32x7 8 , lv8 pinaka lcr til 902000156 de spanner 5 16x13 32 //bid details 2 / 53 pinaka lcr til 902000156 de spanner 5 16x13 32

State Government

CTN :45228148

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of tube cleaning equipment - heavy duty flexible shaft with antifriction lining complete with 5/8" inner core and, hand piece of plain end bearing type suitable for cleaning of 37 mm i.d, brass/ss tubes. (with outer casing not more than 33mm), length 25, length 30, heavy duty flexible shaft with antifriction lining complete with 1/2" inner core and, hand piece of plain end bearing type suitable for cleaning of 37 mm i.d brass/ss, tubes. (with outer casing not more than 33mm), length 25, length 30, spare hand pieces having plain end bearing for above flexible shafts (5/8mm inner, core) for cleaning of 37 mm id brass tubes, plain end bearing for above flexible shafts (5/8mm inner core) for cleaning of 37, mm id brass tubes, motor side nipples suitable for 5/8 inner core having female threads on one side, and 11/16 size on other side total length of nipple shall be 2, - do - but having female threads on one side (hand piece side), turk head brushes for cleaning of, 37 mm i.d. tubes, 37.6 mm i.d. tubes, 42 mm i.d. tubes, 98 mm i.d. tubes, 96 mm i.d. tubes, tool head cutter of 15 gears with male thread of suitable for cleaning of 37 mm i.d., tube cleaning motor of 5 hp x 2900 rpm, kirloskar make, duly mounted one trolley,, complete with dol starter, 2 mtr cable., steel wire dusting brushes of size 8 x 4 having steel wire protruding 1 x 16, swg, steel wire dusting brush of size 6 x 2 with handle having spring steel wire, protruding 1 x 16 swg with 5 rows of 14 bunches having 40 wires in each bunch., cleaning equipments eng.., flexible shaft with short hand piece (for bend tube)with 12 mm inner core and 10 mt, inner core flexible shaft 3/4", inner core of dia 5/8" for above flexible shaft, inner core of dia 1/2" for above flexible shaft, flexible shaft with short hand piece for bend tubes, 12mm inner core x 16 mtr long, flexible shaft with short hand piece for bend tubes, 18mm inner core x 12 mtr long, flexible shaft with short hand piece for bend tubes , 18mm inner core x 21 mtr long, tool head cutter complete for boiler bent tubes suitable for cleaning of tubes, of, (a) 76.2 mm od tube, (b) 70.0 mm od tube, (c) 63.5 mm od tube, (d) 50.0 mm od tube, cutter wheel for, (a) 76.2 mm od tube, (b) 63.5 mm od tube, (c) 70.0 mm od tube, (d) 50.0 mm od tube, trunk head brush suitable for boiler, 50 mm, 56mm, 63.5mm, 70 mm, 72.6 mm, 76.2 mm, pins for tool head cutters of above sizes (as per sample), plain end bearing for above flexible shafts, (spare hand piece having double ball bearing for flexible shaft 18mm inner core with, nipple 55mm long), plain end bearing for above flexible shafts, (spare hand piece having double ball bearing for flexible shaft 12mm inner core with, nipple 55mm long), hand piece side nipple with socket suitable for " inner core 2" length, m.s. nipple with socket suitable for " inner core, 10"x2" polymer wheel suitable for 50/100 kg sugar carying trolley, sugar bag carryaing trolly heavy duty quality heaving angular frame based on 2 nos, heavy duty polymer vheels size 10" by 2" shelf lubricated duly furnished and painted, load carryong 150 kg.

CTN :45233281

08 Jun, 2026 NA

Doiwala - Uttarakhand

Tender For cleaning equipment - heavy duty flexible shaft with double round inner core complete with guard coupling and hand piece having double ball bearing and oil seal for use in 42 mm id brass tubes., size of shaft 16 mm x 8 mtr long, size of shaft 16 mm x 10 mtr long, size of shaft 18 mm x 8 mtr long, size of shaft 18 mm x 10 mtr long, inner core nipple for 16mm shaft, innner core nipple for 18mm shaft, hand piece (16mm shaft), hand piece (18mm shaft), motor adopter for above shaft, inner core for (16mm ), inner core for (18mm ), t.e. type tools head cutter with 15 cutter (12 straight and 3 bevelled) for use with flexible shaft having bsp thread and suitable for 42 mm id brass/ss tube. the tool head cutter will be made of best quality steel material duly hardened and tempered for longer service., spare for above te type tool head cutter size 42 mm, spare pin, spare straight cutter, spare spring, spare bevelled cutter, spare hinge, spare washer, turk head brush made of genuine round spring steel wire 28/29 swg for use with flexible shaft having 1 /2 bsp thread suitable for the tube., 42 mm i.d. tube, 98 mm i.d. tube, scrapper of spring steel suitable for tube cleaning of 98 mm i.d. brass tube, steel wire dusting brush of round spring steel wire provided with wooden handle size 6 x 2 , steel wire brush size 6 x 2 for sugar grader having round spring steel wire, sugar bag trolley complete with polymer wheel (heavy duty) size 10 x 2 x1 and trolley made of steel suitable for carryng 100 kg sugar bag., polymer trolley wheel for sugar trolley size 10 x 2 x 1 , flexible shaft machine mounted on 3 wheel m.s. trolley with carrying handle, 5.00 h.p.ac motor,tefc, 2900 rpm, with cover complete with push button (dol) starter & with 2 mtrs. cts cable, complete with adopters and direct coupled to motor shaft, complete in respects suitable to use with 1 /2 bsp thread flexible shaft, tool head cutter complete with 3 cutters for cleaning of brass tubes size 98 mm id with flexible shaft having 1 /2 bsp thread, brass nozzles monarch for emico-kcp make vacuum filter, brass nozzles for kcp make sd/cfg, machine, bag marking brush oval shape, pad type boring tool hand cutter size 38mm

Central Government/Public Sector

CTN :45194385

25 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of hydraulic operated trolley 02 ton capacity for loading and unloading of cbc draft gear, as per technical data, single cylinder platform size: 750x600x200mm, closed fixed height: 500mm, height after lifting: 1200mm, movable type polymer/ci wheel size: 180x50mm, with test certificate, along with additionalhandle, 03sets spare kit and hydraulic oil for top up, heavy duty& smooth operation with +/-3% manufacturing tolerance. [ warranty period: 30 months after the date of delivery ] ]

Planet Wheel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors