Latest planetary gear drive Tenders | Government planetary gear drive Tenders

Central Government And Public Sector

CTN :45289226

04 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of rolling stock - total qty.= 02 nos., description: - disposal of condemned loco nos. 21206 & 21289 with 06 nos. tm armature/stator and 02 nos. bogie frame in each loco, type of locomotive: wam-4 excluding wheel set with bull gear & axle box with bearing and other salvageable items in each loco i.e. main transformer-01 no., gr-01 no., rectifier-01 no., sl-02 nos., sj-06 nos., vcb-01 no., arno-01 no., mvrh-01 no., mvmt-02 nos., mcp with cp-03 nos., mph-01 no., mvsl-02 nos., mvsi-02 nos., mp-02 nos., pantograph-02 nos. remarks - 1) condemned loco to be sold without excluded fittings i.e. 06 nos. wheel set with bull gear and 12 nos. axle box with bearing is not included in disposal of said locomotive. thus during the pick-up of said locomotive by purchaser, 06 nos. wheel set with bull gear and 12 nos. axle box with bearing will be handed over to store section of els/bsp. 2) condemned loco to be sold on ""as is where is"" basis & delivered in numbers. 3) after disposal of all cut-off materials, cutting area to be cleaned by the purchaser.

Central Government/Public Sector

CTN :45313275

04 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - released mixed ferrous scrap: cutting pieces of engine block, bull gear, scrapped bogie parts ( bss pin, yoke pin, anchor link, silentent block, bss pin, yoke pin, anchor link, silentent block, bss hanger, circlip, anchor link bracket, lower spring seat, bearing, break beam etc., ) megi side bearer, spring, coupler spring, condemned alternator, gear, break disc, after cooler, housing pump, casing, armeture, push rod, cylinder head, nut bolt, pipes, cbc and screw coupler, coupler head assembly, carrer plates front and rear, supporting device, buffer plunger, protective tube, bogie bracket, break beam, hook and clamp, knuckle, m.s.plate and other miscellaneous mix ferrous scrap. excluding steel and aluminium. note 1. re-punching with other lots will not be allowed. 2. lading will be start at 09.00 a.m. loading will not be allowed after 15.00 hrs.

Central Government / Public Sector

CTN :45098576

01 Jun, 2026 NA

Begusarai - Bihar

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; repair or refurbishment of process air compressor (tag no b10-k-4021) bull gear rotor; as per nit

Central Government/Public Sector

CTN :45116865

25 May, 2026 NA

Nashik - Maharashtra

Tender For tooth spacing k value checking go & no go gauge for bull gear 107 teeth (mating shaft pinion- 21teeth) for wag-9 / wag-9 hc loco. size: go: 317.09/317.17 mm & no go (service limit): 316.49 mm. ref: rdso drawing no. sk.dp-3848. material: tool steel - is- 3748/90, hardness: 40/45 hrc and supply with calibration certificate. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45220322

25 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned electric loco no.23479 wag5ha eddx as is where is condition with all available ferrous -non ferrous-wooden fittings- excluding the following reclaimable items- (1) wheel set with bull gear- 6 sets (2) axle box with ferrous components-12 nos. removed items- (1) battery-10 nos (2) head light-2 nos (3) cab fan-4 nos (4) cab fan transformer(tfvt)-1 no . loco no- 23479 wag5ha. ds8 no. 063630-25-07381 dt:12-02-2026 location: dsl-ed. cus- sse-dsl-ed. pl.no. 98980889. note: (1) two smoothning reactors available in shed floor saleable. (2) rc items to be handed over to custodian at specified location before final delivery. (3) cutting permitted to loadable size only. (4) crane loading permitted. (5) purchaser should take safety precaution while cutting of loco.(6) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by purchaser from railway premises and should be disposed as per the existing norms of central/state government.

CTN :44624116

09 Jun, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : biennial rate contract with bhel for supply of spares - field controller:areca-iii , m/s bhel, hnk:valve spindle(rhs), assembly of gland ring exhaust pedestal, assembly of gland ring cover gen end, set of glands 30 mw tg, thermocouple drb-200 l=6000 part no. : ., thermocouple type-dra-300 hpt bearing pa, thermocouple for esv, rtd d-1;l=140mm,d=6mm,1/2"m, turb stm temp ,t/c, tc:b,l=375,d6mm,dup, thermocouple type b l=515, hpt brg mtl temp,t/c, turb/seal temp,t/c, hwm-846, t/c type-b;l=465mm;esv+hpcv, xrp883:journal shaft assy, complete flame scanner head assembly. pa, fibre optic cable for flame scanner part, lens barrel assembly for scanner part no, housing elet mod, connectors:connector prefab. cables 5mts, flame scanner lens part no. : - drg no., collimator assembly for flame scanner pa, compression spring for flame scanner, bhel-3:c3000spl-glvsw-mo-f2250mm:complet, bhel part iii:c3000-sv-sw-hw-f22 2":comp, bhel part iii:c3000-sv-sw-hw-f22,1":comp, bhel part iii:glv-c-1500-sw-hw a-1051":c, 2-c1500-sv-sw-hw-f22:comp. valve assy(hw, bhel part iii:c800-svsw-hw-a105sst1/2":c, bhel part iii:c2500-sv-sw-hw-f22,size 1", 25nb-c-800-hw:complete assy., bhel-4:2-c2500-glv-hw-sw-f22:complete as, bhel part iii:c1500-sv-sw-hw-f221-1/2":c, bhel part iii:c800-sv-sw-hw-a105-sst 2":, bhel part iii:glv-a-105-c1500-sw-1-1/2":, bhel part iv:c1500-sv-sw-hw-a105-1/2":co, bhel part iii:c1500-sv-sw-hw-f22 1":com, xrp883:multiport outlet and liners, xrp883:seal wear ring, xrp883:bull ring clamping ring(4 seg./se, xrp883:spring stud brg(wear sleeve), xrp883:bowl hub cover for bowl mill xrp-, xrp883:trunnion shaft end cap-thrust end, xrp883:trunnion shaft end cap-free end, xrp883:trunnion bushing retainer, xrp883:thrust plate-thrust end journal h, xrp883:thrust plate-free end, xrp883:trunnion shaft, xrp883:spring air seal cap, xrp883:spring stud brg.housing, xrp883:spring guide var-02, xrp883:spring housing cover var-02, xrp883:spring stud adapter, xrp883:spring preload stud var-02, xrp883:spring orifice plate, xrp883:journal pr.spring, xrp883:deflector blade, ref no: hy-308.0, xrp883:spring stud lock nut, xrp883:inverted cone spare, xrp883:stop bolt assembly, xrp883:upper journal housing, xrp883:lower journal housing, 50 pin scsi cable set,g/f, prefab i/o cable set,g/f, surge spprsr cn9067557145, wire wound resistor,cn9060372115, maxpac 37cond.ribb on cable assy. 84, res zero ohm 0.25w,dv0692305963, res mf 10m 1% 0.6w 50ppm,en7460190586, terminal block cbt250 ,cu7433498508, fuse base & carrier, tag boardassyly.with 5poles,d99260005501, electrnc componet:blank modules(48*24)mm, diode stud type 1400v; 95a, maxpac cable assy. 28" part no. : -d5945, ars100:valve stem, 250mw:screw cap soc pm10x20, 250mw:locking plate, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:rectangular wire 1.7x1.4, esv:piston, jacking oil system:jacking hose brg 5&6, jacking oil system:jacking oil hose brg-, xrp883:worm gear & worm shaft assy, 250mw:caf gasket, 250mw:gasket dia 1240/1172, s3, 250mw:o ring, 250mw:o ring, 250mw:gasket, esv:stud m30x150, esv:cap nut am 30, 250mw:governor impeller, 250mw:threaded bushing, over speed trip system:wheel, 250mw:clamping piece for 3l &3r, thri 108/44:sealing strip 8x2, l=750mm, 250mw:locking plate for 2l & 2r, 250mw:locking plate, insulator:bushing insulator, insulator:pin insulator, insulator:shaft insulator for esp, hnk:sealing ring (lip seal), cv & servomotor:plug with stem, gen(bhel-thri 86/35):sealing ring assy., xrp883:gearbox asy, wb-1e:complete assembly, bhel davr:pwr mdl 6qg12 3-ph 68912sss006, oil gun assy, bhel davr:pulse coupling stage mdlassy u, bhel davr:trfmr pwr 5kva 3ph ynyn0 220/4, bhel davr:res w.w 500w 5% 150r 50ppm, bhel davr:res ww 2k 5%25w pir25, bhel davr:mdl voltage level converter mo, bhel davr:distribution block 5way, colou, bhel davr:mdl 69203na1aa un0610av1, i/o, bhel davr:srg spr 150v-250v dc 3rt2916-1, bhel davr:shunt 50a/60mv; accy:0.5%, bhe

Central Government / Public Sector

CTN :45267085

12 Jun, 2026 NA

Vijayawada - Andhra Pradesh

Tender For supply of bull gear(107 teeth) as per rdso spec. no. mp.0.2800.19, (rev-1) june 2019 or latest and rdso drawingno. skdp-3848 alt.1 or latest for wag-9 locos. firm shall quote to the latest alterations/amendments/modifications for specification /drawing which is prevailing as on tender opening date. [ warranty period: 30 months after the date of delivery ] ]

CTN :45166923

06 Jun, 2026 NA

Asansol - West Bengal

Tender For supply of tooth spacing k value checking go & no go gauge for bull gear 107 teeth (mating shaft pinion- 21 teeth) for wag-9 / wag-9 hc loco. size: go: 317.09/317.17 mm & no go (service limit): 316.49 mm. ref: rdso drawing no. sk.dp-3848. material: tool steel - is- 3748/90, hardness: 40/45 hrc [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45227567

05 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For tooth spacing k value checking go & no go gauge for bull gear 107 teeth for wag-9 / wag-9 hc loco. size: go: 317.09/317.17 mm & no go: 316.49 mm, ref. rdso drawing no. sk.dp-3848, material: tool steel - is- 3748/90, hardness:40/45 hrc and supply with calibration certificate. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45240564

29 May, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of main bull gear suitable for medha traction system of 1600 hp demu dpc wheel as per icf drg. no. dmu/dpc/ss-0-2-002, alt-b, item no. 3. [ warranty period: 30 months after the date of delivery ] ]

Planetary Gear Drive Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors