Get complete information related to latest Planter Box Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Planter Box Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Planter Box Tenders.
Tender For repair maintenance of of all internal and external electrical services in 400 nos. phase-i and 384 phase-ii type-iii qtrs. at dev nagar, new delhi. (sh: repair of already existing hybrid type solar tree )
Tender For supply delivery and installation of 73nos of custom made grc planterboxes along the central medians from devichowk to municipal office in rmc.
Tender For maint of road side lighting works and miscellaneous electrical items under ge n akhnoor. - labour for cutting/pruning of tree branches along security light pole around 2 mtr radius of security light fitting and removing from site including arrangement of t&p (i.e. axe, rope & ladder etc.) complete all as specified and directed., dismantling and taking down street light fittings/post top lantern/down lighter of any wattage/size for repair or replacement of burnt/worn out accessories or carrying to mes store and refixing after repair on required location complete all as directed.note: accessories or components needed for replacement shall be measured and paid separately under appropriate items., repairing of unserviceable led street light any make/model of 90 100 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., repairing of unserviceable led street light any make/model of 60 72 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., pvc conduit medium grade of size 15 mm bore including fittings, isi marked, fixing with pcc pole/steel tubular pole/garden lights/gate lights for wiring connection from pole box to light fitting and supporting with 03 nos gi strip clamp, nut & bolt, complete all as specified and directed., replacement of pvc insulated pvc sheathed stranded copper conductor cable 2.5 sqmm twin core complete all as specified and directed., pvc insulation tape of width 18 mm, thickness 0.125 mm, length 25 mtr, isi marked, for proper insulation of joints in wire where required or directed., replacement of aluminium pvc service wire 2 core 6 sqmm flat roll of 90 mtr, superior quality, complete all as specified and directed., disconnecting & dismantling of damaged/unserviceable cable of any type/make and supply & laying in repair/replacement of cable xlpe insulated, screened pvc bedded, galvanized steel strip or wire armoured electric power cables (heavy duty), 1100 volts grade with stranded aluminium conductor using lugs/ferrules at both ends of cable and testing complete all as directed for following sizes:, 10 sqmm 4 crore, 16 sqmm 4 crore, 25 sqmm 3.5 crore, 35 sqmm 3.5 crore, note for item no. 17 & 18: excavation & earth work, sand cushioning, bricks protection & gi pipe where required shall be measured and paid separately., excavation in trenches not exceeding 1.5 mtr width and not exceeding 1.5 mtr depth, getting out for electric cable complete in any type of soil complete all as specified and directed., removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed., returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed., supply and laying sub class b bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed., sand cushioning with ganga sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable) complete all as specified and directed., replacement of 40 mm gi tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor/as garden post including 2 nos mild steel fi clamps 35 3 mm size to support pipe with pole complete all as specified and directed., boring under road horizontally of size 40/50 mm bore using gi pipe for passing of cable in road/path in hard/soft/loose soil complete all as specified and directed., applying two coats of aluminium paint over a coat of red oxide on steel tubular po
Tender For annual repair m/o non-residential building under sub division no. i, nacd, apwd, mayabunder during 2026-27.sw-cutting and removal / trimming of 06 nos. dangerous tree standing within the premises of pm shri gmsss, pokkadera, mayabunder.
Tender For supply and installation of furniture - guest house, wardrobe: manufacturing and supplying wardrobe of size : 120w x50 d x225 h cm storage side and shelves are made up of 17mm a grade treated rubber wood fixed by 1 2 a j stainless steel hinges and handles necessary good quality hardware rate inclusive cost of material transportation loading and unloading changes labour charges etc.. smoothly finished with polyurethane materials, tv unit: manufacturing and supplying tv unit of size 140 x 120cm panel made of 17mm chemically treated rubber wood good quality fiuing accessories provision for switch board etc.. smoothly finish with polyurethane materials, cot: manufacturing and supplying cot of size: 152 w x 198 l x 35 h cm frame and all slats made by good quality teak wood bed with 9mm marine plywood smoothly finish by polishing two coats of polyurethane sealer and one coat of polyurethane top layer, side table: manufacturing and supplying side table of size: 60 x50 x 45 cm frame and slats made by good quality teak wood smoothly finish polyurethane sealer and polish materials, dressing table: manufacturing and supplying dressing table of size: 75 xl60 x60 cm and mirror unit of size: i 10 x 75 cm frame and slats made by good quality teak wood smoothly finish by polishing two coat of polyurethane sealer and one coat of polyurethane top layer, table: manufacturing and supplying table of size: 100 x60 x75 cm frame and slats made by good quality teak wood smoothly finish by polishing two coats of polyurethane sealer one coat of polyurethane top layer, ceiling: providing and fixing of frame work made of special sections and l22mm marine plywood and veneer provide necessary led panel light, head board: manufacturing and supplying head board for cot of size 245 x 120 cm frame made by 17mm a grade treated rubber wood smoothly finish by polishing two coats of polyurethane sealer and one coat of polyurethane top layer, wall cladding: providing and fixing wall cladding with 12 mm marine plywood and mica, wooden arm chair: manufacturing and supplying teak wood arm chair smoothly finish by polishing two coats polyurethane sealer and one coat polyurethane top layer, wooden teapoy: manufacturing and supplying teapoy of size : 70 x 45 x 50 cm frame and slats made by good quality teak wood smoothly finish with polishing, working chair: manufacturing and supplying teak wood working chair smoothly finished with polishing, suite room sofa: 3+ i manufacturing and supplying sofa 3 + 1 seater made by high density pu foam with teak wood frame smoothly finish with polishing, dining table: manufacturing and supplying dining table of size: 180 x 90 x75cm frame and slats made by good quality teak wood smoothing finish by polishing, dining chair: manufacturing and supplying teak wood dining chair smoothly finished with polishing, buffet table: manufacturing and supplying buffet table of size : 360x60x90 cm made by 16 mm bwp 710 grade marine plywood and mica top with good quality granite provide necessary shelves, living hall table :manufacturing supptying living hall table of size :270 x and 60 x 75 cm frame and slats made by good quality teak wood smoothly finish with polishing, sofa: manufacturing and supplying sofa made by high density pu foam and teak wood frame smoothly finish with polishing-3 seater, sofa: manufacturing and supplying sofa made by high density pu foam and teak wood frame smoothly finish with polishing-1 seater, gypsum ceiling: providing and fixing gypsum ceiling with gl section and gypsum panel board putty work and emulsion paint finish provide necessary led panel light, reception counter paneling: providing and fixing paneling with 12 mm marine plywood and colour mica, reception table: manufacturing supplying reception table of size:265 x and 100x 100 cm made by 16 mm bwp 710 grade marine plywood provide four drawer, side table: providing and fixing side table of size: l00x 40x75 cm made by 16 mm bwp 710 grade marine plywood, planterbox 1
Tender For rates are invited for tree plantation activities within the jurisdiction of the civic body, as well as for maintenance and repair works for the upcoming one year