Latest plaque Tenders | Government plaque Tenders

Central Government/Public Sector

CTN :45730237

20 Jul, 2026 NA

Hubli - Karnataka

Tender For supply of set of security plates for fiat bogie (consisting of 3 items) (1) security plate( for control arm)to fiat drg. no.1356259, ver.05r=16 nos. (2) security plate for anti rollbar arrgt. to rcf drg. no. lw05114, alt a =8 nos. (3) security plate ( for traction center )to fiat drg. no.1268843, ver.00r=02 nos. as per specn. c-k201, x5crni 1810(304)2d/2b [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45475154

07 Jul, 2026 30.00 Lacs

Gwalior - Madhya Pradesh

Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminum conductor cable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get

Central Government/Public Sector

CTN :45709067

18 Jul, 2026 45.00 Lacs

Roorkee - Uttarakhand

Tender For repair replacement of internal wiring incl sub main wiring, mcb dbs, bldgs security lights and connected items in pocket 1 to 8 under ge roorkee - taking down old unserviceable point wiring of any description including all fittings and fixtures like switches, sockets, ceiling rose, fan regulator, tubelight,, mirror light,, ceiling light etc complete all as specified and directed., m&l for point wiring with 1.5 sqmm frls-h insulated, unsheathed, multistranded, 1100 volts grade copper conductor cable single core conforming to is:694 along with one run of 1.5 sqmm frls-h insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories / junction boxes / inspection covers etc of suitable size but not less than 20mm(od), concealed in wall/ floor etc including provision of earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass gi screws/ modular cover plate as required for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for one light / ceiling fan / exhaust fan / call bell point controlled by one switch, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., all as per item no 2 here-in-before but one wiring in existing conduit for one light / ceiling fan / exhaust fan / call bell point controlled by one switch., all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one one light point controlled by two no. two way switch complete all as specified and directed, all as per item no. 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., m&l for sub main wiring along with earth wire with frls-h insulated copper conductor, single core cable drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for 2runs x 4 sqmm(ph & n) + 1run x 4 sqmm(earth wire):- (note: three runs of copper cable and one run of pvc conduit shall be measured as one unit length), all as per item no 11 here-in-before but 2runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), all as per item no 11 here-in-before but 2runs x 10 sqmm(ph & n) + 1run x 10 sqmm(earth wire), all as per item no 11 here-in-before but 4runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), notes for item no. 2.00 to 14.00(i) quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface.(ii) if any beam / column / rock wall is encountered while cutting chases, that particular portion may be provided with pvc casing & capping or surface conduit for drawing cables and surface pvc gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) no cutting shall be done on ceiling for laying pvc conduit for ceiling fan point wiring. surface conduit or pvc casing capping may be

Central Government/Public Sector

CTN :45717368

14 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of (namo bharat) detail items kit for emu underslung motor coach bogie. 1) lift stop for primary suspension- aaa01058, alt 'a' - 8 nos. 2) pin for primary suspension- aaa01059, alt 'a' - 8 nos. 3) primary bump stop- finish machined- 72701006/col.i - 8 nos. 4) adaptor assembly- 72705005/col.i - 4 nos. 5) plate for primary suspension- aaa01054 - 16 nos. 6) safety catch for gear box- aaa00005, alt 'a' - 4 nos 7) safety catch for motor- aaa00006 - 4 nos. 8) security plate- aaa02054, alt 'a' - 8 nos. 9) security disc- aaa02123 - 8 nos. 10) spring pad -finish machined 79001004/ col.i - 8 nos. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45719243

14 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of detail item kit for emu/us-tc bogies- (1) lift stop for primary suspension to icf drg.no:aaa01058, alt ''a'' - 8 nos (2) pin for primary suspension to icf drg.no: - aaa01059, alt ''a'' - 8 nos (3) primary bump stop- finish machined- 72701006/col.i - 8 nos. (4) adaptor assembly- 72705005/col.i - 4 nos. (5) plate for primary suspension to icf drg.no: aaa01054 - 16 nos. (6) security plate to icf drg.no:aaa02054, alt ''a'' - 8 nos. (7) security disc to icf drg.no- aaa02123- 8 nos. (8)spring pad -finish machined to drg.no 79001004/col.i-8 nos. all the items are to be supplied as coach set only. [ warranty period: 30 months after the date of delivery ] ]

CTN :42778284

30 Jun, 2026 NA

Delhi - Delhi

Tender For corrigendum : supply of exam conduction lab c c-- tower server , desktop computer , ups 3 kva online , ups 1 kva , office jet printer , biometric fingerprint scanner , display screen , revolving chairs , digital podium , acoustic system , heavy duty cooling system , lighting facility , workstation , 24 port core switches , installation of server cabin with high security entrance setup , supply installation of testing and commissioning of 24 port access switch , sitc of patch panel cat6 , sitc of cat 6 cable , cat 6 i o single face plate , lan switch and patch , 24u rack 600 x 800mm , 15u wall mounted rack , configuration installation testing and commissioning charges

CTN :45691290

09 Jul, 2026 NA

Pune - Maharashtra

Tender For supply, installation, commissioning and configuration of server with all network items - supply, installation & configuration of os based server, server model: gen11 or above (tower server or rack server), processor: intel xeon bronze 3408u, 8-core, 1.8 ghz, 125w or above, memory (ram): 32gb ddr5 (1×32gb, 4800 mt/s) or above, expandable, storage controller: embedded 8 sata ports controller with intel® raid, storage: 960gb sata 6g read intensive sff ssd or above, drive bays: 8 sff (small form factor), network: integrated 2 x 1gbe ports (bcm5720), expansion slots: pcie gen5 -2 × x16 slots, power supply: 800w flex slot platinum hot plug psu, cooling: 2 standard non-hot-plug fans, management: ilo (integrated lights-out) with intelligent provisioning, security: tpm 2.0 (trusted platform module), accessories: usb international keyboard & mouse kit, form factor: tower (4.5u) or rack server, 1.92 tb sata 6g read intensive sfp bc multi-vendor ssd or more, warranty: 3 years or above, supply of l3 lite managed switch preferably d-link - 28 port, (or should be compatible with existing lan/vlan configuration of hef unit), supply of 6 u network rack, supply of cat 6 armoured cable - 305 mtr/box, supply of ofc-6 core single mode, supply of sfp module (trans receiver) single mode - 10 g, supply of cat 6 patch core, supply of hdpe pipe to lay fo cable, supply of i/o, face plate, back box and installation, fixing of armoured cables at various locations as per details - a given below, installation services -- server mounting and installation in rack, l3 switches installation, mounting and configuration, io crimping, back box fixing, switch side labelling, numbering, splicing, digging, trenching of soft and hard soil along with road side 3550 mtrs cutting, filling and laying of ofc cable with hdpe pipe

CTN :45682336

03 Jul, 2026 NA

Kharagpur - West Bengal

Tender For supply of security plate. drawing no. : fiat - sig schienenfahrzeuge ag's no. 1356176, ver.- 07. matl.& specn : rdso's spec. no.- c-k201, amnd.-1, corri.-1, x 5 cr ni 18-10 (304) 2d/2b. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

CTN :45698328

07 Jul, 2026 NA

Bareli - Madhya Pradesh

Tender For security plate as per drg. no. 1356176 ver. 07r and specification no. c-k201, x5crni18-10(304)2d/2b. (note: manufacturer shall supply without any marking or punching on security plate). packing instruction - spi001 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45702702

01 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - p.l. no. 98090719. stainless steel scrap consisting of condemned and unserviceable plain / trough floor / chequered sheets , lavatory pans , pipes / pipe fittings , weld mesh , lavatory inlays , wash basins, dust bins , mugs with / without ferrous chains , mirror frames , wall protectors , liquid soap containers , soap tray , foot step assembly , ratchet assembly ,feeder junction box,el boxes, switch plate cover , shelf below mirror, , commode chute support brackets , hot box , berth supports , adopter for commode , nose plates , fuse boxes , handles , rods, flats , rmpu spares , blowers , accumulator for rmpu coach with / without original non ferrous attachments , chairs ,bottle holders, vessels / utensils , security plates , dressing vessels , and similar items used in canteen / hospital. of sorts and sizes with / without ferrous/ non ferrous/ fibre/rubber ,other original attachments and similar items stainless steel in nature. as is where is basis. segregation and removal of attachments not permitted. note:- cssd / goc electronic weigh bridge to be used for weighment.

Plaque Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector