Latest plasma extractor Tenders | Government plasma extractor Tenders

CTN :43185676

05 Jan, 2026 NA

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer- the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks.warranty must be one year., electronic balance- the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. warranty must be one year., vaccum pump - the pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted withvacuum and filter cartridge., hot air oven- the inner chamber should be made of stainlesssteel and the outer chamber should be m.s powdercoated. the maximum capacity of the oven shouldbe 100 ml or more. the operational temperatureshould be between ambient to 250oc or more witha temperature accuracy of 1o c. pid based digitaltemperature control., double distillation unit- the unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil bath- the oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240oc (0.1oc increment) with a temperature stability of 1oc, water bath- the water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars., ph/ condutivity meter - operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range shouldbe in between 0.00 to 29.99 s/cm, uv cabinet- operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometer- application: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca 2+ :0-99.9 ppmli 2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required

Central Government/Public Sector

CTN :43252559

09 Jan, 2026 NA

Nagpur - Maharashtra

Tender For supply of tdr soil moisture meter

State Government

CTN :43238979

08 Jan, 2026 40.00 Lacs

Bathinda - Punjab

Tender For supply of supply and installation of equipment and consumable for idea lab d d -single nozzle 3d printer , pcb milling machine , co2 laser cutting machine , vinyl printer , 3d scanner , lathe machine cum milling , belt and disc sanding machines , scroll saw , wood turning lathe , bench top drill machine , portable welding machine , computerized sewing machine , filament dehydrator , reflow oven , digital multimeter , mso 200 mhz , digital oscilloscope , power supply , function generator , bench top multimeter , non-contact voltage tester , lcr meter , soldering station , digital microscope , soldering rework station , hand drill machine , cordless drill , jig saw , miter saw , hot air gun , table saw , bench grinder , angle grinder , straight grinder , circular saw , blower , cordless screw driver , vaccum cleaner , random orbit sander , planer , cordless vaccum cleaner with kit , rotary tool kit , rubber grip hacksaw , hacksaw mini , claw hammer steel shaft , ball pein hammer , rubber mallet , ring spanner set 12 pcs , open end spanner set 12pcs , combination spanner set 8 pcs , allen key set 10pcs , allen key set 12pcs , combination plier , long nose plier , circlip straight 5 inch , circlip bent , diagonal cutter , wire stripper , adjustable spanner , pipe wrench , c clamp , c-clamp , snap- off knife , 16pcs screw driver set , 6pcs precision screw driver set , max steel snip cutter , pvc pipe cutter , hot glue gun , small file set , big file set , chisel set , punch set , bench vices , router bit starter kit , drill bit set , baby vice , ratchet set , pegboard , digital vernier caliper , micrometer , steel rule 300mm , steel rule 600mm , engineering square , meter tape 30m , measuring tape 3m , measuring tape 5m , spirit level , goggle , apron , ear muff , mask , fire extinguisher , first aid kit , gloves pair , 3d printer filament , acrylic sheet , foam sheet 8mm, 4ft x 4ft , ply board 5mm, 2ft x 4ft , nylon rod 12mm 15mm 18mm 25mm of length 1m , nuts, 3mm 4mm 5mm 6mm ) /bid number: gem/2025/b/7013688 * /dated: 18-12-2025 & & / bid document1 / 110 & & ' ' /item category8mm 10mm 12mm, pack of 100 , bolts , screws , washers , studs , nails , adhesive 1kg , 2 way tape , pvc pipe . 75 inch,10ft , pvc pipe 1 inch10ft , pvc pipe 1. 5inch 10ft , pvc pipe 2. 0inch 2. 5 inch, 3inch length 10ft , aluminium channels , l c box strip length 12ft , pcb drill bit 0. 4mm , pcb drill bit 0. 8mm , pcb drill bit 1mm , drill bit 4mm , drill bit 5mm , drill bit 6mm 8mm, 10mm, 12mm , arduino uno r3 , arduino nano , arduino mega , raspberry pi model 4b, 4gb , esp8266 nodemcu , esp32 development board , beaglebone blu , beaglebone black , voltage regulator module , mini micro submersible water pump , piezoelectric plate , 8x8 led matrix module , bluetooth , 7 inch segment led display , gsm or gprs or gps module , laser module , ldr module , 4x4 matrix keypad , joy stick module , active buzzer big , active buzzer small , motor driver , sound playback module , bo motors , vibrating motor , capacitive touch switch , ir sensors obstacle sensors , triple axis magnetometer , humidity sensor , mq-2 , mq-3 , mq-4 , mq-5 , mq-7 , ultrasonic sensor module , triple axis accelerometer , pir motion detector module , pulse rate heart sensor , relay module , soil moisture sensor , touch sensor , rain drop sensor , flex sensor , temperature sensor , force pressure sensor , colour recognition sensor , water flow sensor , sound sensor , ir sensor array for line following , rfid reader-tags , rf modules txand rx 315 mhz ask , stepper motor with driver board , servo motor 360 rotation , servo motor 180 rotation , metal gear servo motor, 180 rotation , solder wire 100grm , solder flux , 830 points solderless breadboard , 400 points solderless breadboard , copper clad board single side , copper clad board double side , male to male breadboard jumper , female to female breadboard jumper , male to female breadboard jumper , usb cables , radium cutter kni

CTN :43204381

14 Jan, 2026 1.50 Crore

Raipur - Chhattisgarh

Tender For supply of pre cleaner , indented cylinder , specific gravity separator , bagging bin , seed treater , digital electronic weighing machine , heavy duty bag stitching machine , digital moisture meter , installation commissioning charges , seed grader (v2) (q3)

State Government

CTN :43188057

29 Dec, 2025 NA

Papumpare - Arunachal Pradesh

Tender For supply, installation, and commissioning of the laboratory items basic hydrology apparatus , digital soil moisture meter , stainless steel magnetic stirrer with hot plate , digital curvimeter , drainage & seepage tank (ground water flow system) , pigmy water current meter , fibrotran , kjeldahl apparatus (digestion and distillation unit) , hunter colorimeter , rotary evaporator , tractor-drawn digital dynamometer , cone penetrometer , tractor-drawn scraper , tractor-drawn laser leveller , potato planter , potato digger/harvester , drone sprayer , iot items (raspberry pi 4 model b 2 pieces with accessories) , fuel flow meter , tractor-drawn reversible plough

CTN :43144127

01 Dec, 2025 9.99 Lacs

Jaipur - Rajasthan

Tender For supply of seed germinator and digital moisture meter

State Government

CTN :43113709

29 Dec, 2025 NA

Papumpare - Arunachal Pradesh

Tender For supply, installation, and commissioning of the laboratory items basic hydrology apparatus, digital soil moisture meter ,stainless steel magnetic stirrer with hot plate ,digital curvimeter, drainage & seepage tank (ground water flow system), pigmy water current meter, fibrotran, kjeldahl apparatus (digestion and distillation unit), hunter colorimeter, rotary evaporator, tractor-drawn digital dynamometer ,cone penetrometer ,tractor-drawn scraper ,,tractor-drawn laser leveller, potato planter ,potato digger/harvester ,drone sprayer ,iot items (raspberry pi 4 model b 2 pieces with accessories) ,fuel flow meter ,tractor-drawn reversible plough