Latest plaster spatula Tenders | Government plaster spatula Tenders

CTN :45312053

02 Jun, 2026 50.00 Lacs

Kishtwar - Jammu And Kashmir

Tender For supply of materials required from time to time for the repair of damaged distribution transformers in electrical division kishtwar during the year 2026-27., se almunium winding wire (round) in sizes 12 to 21 swg, dpc almunium winding wire (round) in sizes 12 to 21 swg, dpc almunium strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva, se almunium winding wire (round) in sizes 12 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc almunium winding wire (round) in sizes 12 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc almunium strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva (in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), se copper winding wire (round) in sizes 11 to 22 swg, dpc copper winding wire (round) in sizes 11 to 22 swg, dpc coppper strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva, se copper winding wire (round) in sizes 11 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc copper winding wire (round) in sizes 11 to 21 swg (in exchange of one kg of scrap including insulation coverage i.e.salvaged conductor), dpc copper strip of sizes for lv winding of distribution transformers capacity 25kva to 250kva (in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), contactors 63a, reverse forward switch 32a, reverse forward switch 40a, insulation gum, exhaust fan 32, buy back of scrap/old brass bush rods, cork washer for lt bushings big/small, cork washer for ht bushings big/small, transformer oil ( fresh), lt rubber washers (small m12 &m 20) ( large m12 & m20), ht rubber washers, ms washers for lt, gutka for ht bush, combination spanner set 25-1.25 (25 ppieces), gum shoes 7/8/9 no., protective ppe gear with goggles, industrial dangri uniform, cotton tape 1 (size) length 25mtr., nawar tap 1 (size), old cotton sari/ cloth, rubberized cork sheet 4mm thick, rubberized cork sheet 5mm thick, cork strip 5mm thick, lathoride paper, electrical grade kraft paper, packing sheet 1 mm, packing sheet 1.5mm, varnish dr. beck, m seal, fevicol / insulation gum, glass wool sleeves of sizes, bakellite tube 1/2 inch ,1/4 inch (1 mtr), packing gutties, manual operated oil pump, clamp tester digital, ms nuts and bolts full thread size 1/2 to 3 inches, ms plugs and caps 1/2,3/4,1,1.1/4, 1.1/2 confirming to relevent is code amended upto date, fire extinguishers, heating coils for electrical heaters in oven 2kw rating, film paper 7mils confirming to relevent is code amended upto date, tarpin oiil, painting brush of sizes

CTN :45289871

06 Jun, 2026 40.00 Lacs

Awantipora - Jammu And Kashmir

Tender For stage contract for carrying out various electrical maintenance works including sitc, itc of various line materials and distribution substations and dismantling of existing deteriorated out lived electrical infrastructure for the year 2026-27 under th - supply, installation, testing and commissioning of 3-phase 25 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 63 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 100 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 200 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 250 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, sitc of 11 mtr long st poles 410, sp-56 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 9 mtr long st poles 410, sp-33 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long st poles 410, sp-15 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long pcc poles including manual, mechanical carriage, excavation of pole pits with inscription of permenent marking on each pole "name of scheme-2019-20/xx" (xxx mean pole numbers say 01,02...) in white paint in backgound of green paint at conspicious place, providing & fixing of pole earthing as per rec standard as per j-1 (spiral earthing) drawing, supply,fixing of spike earthing rod 20mm 2,5 mtr long with gi strip (25x3)mm, supply and painting of each pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint), providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of galvanized iron of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of mild steel of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing & and fixing of 11 kv pin insulators (polymer) with pins ( 5 kn), providing & fixing of 11 kv, g.o ab switch , 3-phase, 200a (09 insulator post type) with arragement for pad locks & operating rod . the operating rod should be g.i pipe (b-class) of 25 mm dia of requisite length., providing & fixing of 11 kv horn, gap fuse 3-phase 100a, providing & fixing of 11kv link set 3-phase, 200 a (station type), sitc of 11kv isolator double break, 3-pole, 630 amps, horizontal mounting type , with earth switch, providing & fixing supply and installation of gapless surge arrestor,9 kv,10 ka, la with (polymer) housing, station type, providing & fixing of lt fuse set of suitable capacity for 63kva,100kva,200kva (as per tender drawing attached), providing & fixing of 11 kv disc insulators (polymer) complete with fitting( 45 kn), providi

CTN :45288199

06 Jun, 2026 10.00 Lacs

Satna - Madhya Pradesh

Tender For supply of lok nirman samagri for f.y. 2026-27 - opc cement, ppc cement, khajuraho sand, son sand, local potter-made bricks, allahabad chimney bricks, chimney bricks (20x10x20 cm), stone blocks (20x20x10 cm), 40mm crushed gravel, 20mm crushed gravel, 10mm crushed gravel, 6mm crushed gravel, crushed stone dust, hard kankar (nodular lime), soil, stone slabs (20mm), stone slabs (30mm), stone slabs (40mm), stone dasas (100mm), shuttering (columns/beams, etc. – iron/plywood), shuttering (roof – iron/plywood), shuttering (roof – wood), tensile steel rebar (10mm dia), tensile steel rebar (12mm dia), tensile steel rebar (16mm dia), tensile steel rebar (20mm dia), binding wire, mesh netting (size: 25x25mm), chain link fencing, fencing wire (6mm bar / g.i. barbed wire), m.s. grills and meshwork, lime, white cement, distemper (for wall painting/finishing), red oxide (for painting iron/metal materials), varnish (for painting/finishing wood materials), paint (emulsion/iss/ssd/asian deluxe), turpentine oil, concrete pole (0.1 x 0.1 x 1.5m), concrete pole (0.1 x 0.1 x 0.6m), 300mm. 450 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 900 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 1200 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 600 mm dia. cement concrete pipe np4 (2.5 kg/cm²), 300 mm cement concrete pipe np3 (2.50 kg/cm²), 450 mm cement concrete pipe np3 (2.50 kg/cm²), 600 mm cement concrete pipe np3 (2.50 kg/cm²), painting brush 2-inch, painting brush 4-inch, high-quality plastic bucket 5-liter, translucent acrylic plastic sheet (3 mm thick), paver block (80 mm x 100 mm), wall putty.

Central Government/Public Sector

CTN :45123739

01 Jun, 2026 NA

Korba - Chhattisgarh

Tender For corrigendum : name of job: package - a : erection, testing, commissioning, trial operation & handing over of boiler and its auxiliaries including pressure part, non-pressure parts, duct dampers and its support structure, rotating equipment’s, air pre-heaters, id/fd/pa fans, mills, refractory, fdps piping and system in boiler & bunker area from nearest fire water line header, handling of materials at bhel / clients stores / storage yard and transportation to site, preparation of foundation, fixing of hangers & supports, application of lining, insulation, supply & painting, stenciling & labelling and common system of unit#1 at 2x660 mw cspgcl korba west tps, district korba, chhattisgarh.

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

State Government

CTN :45301374

29 May, 2026 NA

Barasat - West Bengal

Tender For repairing of 1 no. of 315 kva dtr ( indoor type ) with supply of materials and testing at rabindra bhawan, barasat under north 24 parganas zilla parishad. - hv bus hing 12 kv 630a , lv bus hing 1.1 kv 630a, , 1.1kv 630a stud-bolt with fittings - brass, , 34kv 250a stud-bolt with fittings - brass, , arcing horn, , insulating materials raman make, , insulating materials senapati 0.75mm, , cotton tape 315 kva, , gasket sheet 6 mm, , ms nuts, bolts & washers, , oil seal hvside, , oil seal lyside, , silica gel breather with silica gel of 500gm, , hv coil copper dpc, , loss 5% allowed, , transformer oil (ehv grade), , labour charges, , final survey with repairing charge 315 kva, , re-assembly & boxing up of 315 kva including testing, , external painting 315 kva, , preparation & fitting of new coil - dpc (for hv cu coil), , preparation & fitting of new coil - dpc (for lv coil), , re winding of existing coil - dpc (for lv cu coil), , dismantling & re-installation of 315 kva transformer with necessary connection of terminals, earthing etc. at site, , transportation of transformer and oil barrels from site to workshop and vice versa

State Government

CTN :45127233

03 Jun, 2026 50.00 Lacs

Rewa - Madhya Pradesh

Tender For block-a cleaning materials supply in central jail rewa m.p.2nd call - mustard oil , laundry soap , washing powder , bathing soap , quicklime / velvet lime , wall-painting brush (all sizes) , painting brushes (all sizes) , paints (all colors) , toothpaste , aftershave lotion (dettol) , shaving blades (pack of 10) , alum , straight razor , shaving brush , scissors (new) , scissor repair service , shaving cream (100g pack) , distemper paint (all colors) , emulsion paint (all colors) , bathroom cleaner , scented phenyl , toothbrush , turpentine oil , date palm leaf broom , bamboo broom , twine / jute string , colored clay (red/yellow/white) , clay water pot (15-liter capacity) , bleaching powder , plastic comb , plastic bucket (15-liter capacity) , plastic mug (1-liter capacity) , raincoat / rain sheet (yellow plastic) , umbrellas , green mat

State Government

CTN :45279132

04 Jun, 2026 1.66 Crore

Udhamsign Nagar - Uttarakhand

Tender For work of construction of a new 11 kv feeder for bifurcation of overloaded 11 kv chakarpur feeder under edd khatima in capital s.i. head, including supply of decentralized materials, as per tender specification. - annexure-a (supply of following material as per upcl norms.), bracing clamp for sp-55 with nut and bolt., pp & clamp with nut and bolt st pole sp-55., stay clamp for sp-55 with nut and bolt., pp & clamp with n&b st pole sp-72., pp & clamp with n&b pcc pole, 8.5 mtr., stay clamp for pcc pole., ht stay insulator., 33 kv suspension ties on every pin insutlator., ipc with aluminium bail for earthing., 11 kv ipc for covered to covered cond., 11 kv ipc for covered to bare conductor., 11 kv mid span jointing kit., 11 kv aaac covered cond. al-59, 99 sq.mm., 11 kv tension clamp with bail & ipc., annexure-b (following work as per upcl norms), chemical earthing., fabrication of steel., excavation of pit for stay set., erection of 11 kv stay set,, grouting of stay set., excavation of pit for pole., erection of single pcc pole., erectin of single sp-55 pole., erection of single sp-72 pole., erection of pcc double pole., erection of sp-55 double pole., grouting of pole., muffing of pole., painting of sp-55 pole., lopping and choppong of tree branchases., cartage of pcc pole, 51-70 k, cartage of sp-55 pole, 51-70 km., cartage of sp-72 pole, 51-70 km., cartage of petty material, 51-70 km., headload cartage of pcc pole, 0-1 km., headload cartage of sp-55 pole, 0-1 km., headload cartage o sp-72 pole, 0-1 km., headload cartage of material, 0-1 km., fixing of 33 kv suspension ties., fixing of ipc with al, bail for earting., jumpering of d/p tpmo, fuse set and t/f., jumper section pole., fixing of 11 kv 90 kn tension clamp b&ipc., fixing of 11 kv ipc for cc to cc cond., fixing of 11 kv ipc for cc to bare cond., fixing of 11 kv mid span jointing kit., laying spreading, stringing aac conductor

CTN :45157163

08 Jun, 2026 30.00 Lacs

Jhabua - Madhya Pradesh

Tender For supply of pwd material others as per list for financial year 2026-27 - financial rates per unit for the financial year 2026-27: sand, gravel (10 mm), stone chips (6 mm), gravel (20 mm), gravel (40 mm), isi-grade cement (major brands), black sand, hard murram, banda, black soil, brown soil, corrugated sheets, coated sheets, iron reinforcement bars (6 mm isi), iron bars (8 mm), iron bars (10 mm), iron bars (12 mm), iron bars (16 mm), iron flat bars, wire mesh, lime wash, ochre wash, asian distemper, asian oil paint, bricks (class 1, 2, 4), cement sheets, ready-mix asphalt, turpentine, clay bricks, jcb machine, poclain machine, centering materials (rental), vibrator (rental), concrete mixer, lorry/truck, white cement, formwork, tiles, marble stone, 9-inch bricks, 12-inch bricks, 18-inch bricks, [pipe sizes] 1/2", 1", 3/2", 3/4", 2", 3", 4", pop (plaster of paris), granite, water tanker (3000 liters), water tanker (4000 liters), water tanker (6000 liters).,hume pipe np2 -100 mm, hume pipe np3-100 mm, hume pipe np4-100 mm, hume pipe np2-125 mm, hume pipe np3 np4-125 mm, hume pipe np4-125 mm, hume pipe np2 -150 mm, hume pipe np3 -150 mm, hume pipe np4-150 mm, hume pipe np2-300 mm, hume pipe np3 -300 mm, hume pipe np4-300 mm, hume pipe np2 -350 mm, hume pipe np3 -350 mm, hume pipe np4-350 mm, hume pipe np2 -400 mm, hume pipe np3 -400 mm, hume pipe np4-400 mm, hume pipe np2 -450 mm, hume pipe np3 -450 mm, hume pipe np4-450 mm, hume pipe np2 -500 mm, hume pipe np3-500 mm, hume pipe np4-500 mm, hume pipe np2-600 mm, hume pipe np3 -600 mm, hume pipe np4-600 mm, hume pipe np2-900 mm, hume pipe np3 -900 mm, hume pipe np4-900 mm, hume pipe np2 -1000 mm, hume pipe np3 -1000 mm, hume pipe np4-1000 mm, hume pipe np2-1200 mm, hume pipe np3 -1200 mm, hume pipe np4 -1200 mm, hume pipe np2-1400 mm, hume pipe np3 -1400 mm, hume pipe np4 -1400 mm, rcc 3 seater color cement bench, rcc 3 seater garden bench, multicolor wall painting work with primer & scrapping comlete as directed by eng. encharge, multicolor wall writing work, multicolor wall art work 3d/graphity/realistic with primer & scrapping comlete as directed by eng. encharge, multicolor wall art work traditional with primer & scrapping comlete as directed by eng. encharge, hige altittude wall painting work, murals 2d with material,painting and fixation as directed by eng. encharge, murals 3d with material,painting and fixation as directed by eng. encharge

CTN :45250319

26 May, 2026 21.33 Lacs

Kohima - Nagaland

Tender For comprehensive maintenance of gpra, lower ag colony, kohima, nagaland during year 2026-27 for 12 months. sh: labour for day to day maintenance works, supply of materials for day to day maintenance works, distempering and synthetic enamel painting works during re-allotment of quarters, painting of gs sheet roofing, providing and laying pcc 1:5:10, 1:2:4, cleaning of overhead tank, underground sump, septic tank, manhole and drain.

Plaster Spatula Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government