Latest plasterboard work Tenders | Government plasterboard work Tenders

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

corporations/Associations/Others

CTN :40542646

05 Jun, 2025 13.61 Lacs

Delhi - Delhi

Tender For providing and laying kota stone flooring, cc slab, interlocking pavers and cc flooring from new jharkhand bhawan - bata chowk to raja bazar ess.

CTN :40267934

06 Jun, 2025 NA

Chamoli - Uttarakhand

Tender For corrigendum : supply of living orl 20 men - fabrication and supplying of structural stores for orl 20 men of size 12000mm x 6000mm , wall panel compatible to structure as per ts , roof set 0.60mm thick pre colour coated pre profiled steel sheets green colour of size 1.00 m x 13 feet , roof set 0.60mm thick pre colour coated pre profiled steel sheets green colour of size 1.00m x 10 feet , ridge cover will be of 0.60mm thick and 1800mm wide tct sheet , puf insulated sandwich puf panels , aluminium frame windows of size 1200mm x 1200mm alongwith wire mesh and sliding shutters of 5mm thick toughened glass , fixed aluminium frame of 900x900mm along with 6mm thick acrylic sheet glazing to the entire length of the verandah , aluminium door single shutter of size 900mm x 2100mm , puf insulation door single shutter of size 900mm x 2100mm , sunshades of size 1500 mm x 500 mm , self tapping screw 1 inch long , self tapping screw 2 inch long , self tapping screw 3inch long , star screw half inch of isi mark pkt of 300 nos , screw 1 inch of isi mark pkt of 300 nos , nut and bolts 8mm dia 60mm long with washer , nuts and bolts 12mm dia 25mm long with washer , led tube light complete set 20w 4 feet long , switch piano flush type 5 amp , switch socket combination 5 amp 5 with pvc box pin , switch socket combination 2 in 1 as per ts , pvc switch board 8 feet x10 feet isi mark , pvc switch board 6 inch x4 inch isi mark , pvc casing and capping of size 25 mm , pvc casing capping tee bend make , pvc casing capping l bend make , pvc square box 4 inch x4 inch , wire single core copper conductor 1.5 sqmm , wire single core copper conductor 2.5 sqmm , mcb box 6 way double door , mcb 10-32 amp sp , wire 02 core 6 sqmm copper as per ts , insulation tape half inch x 25 mtr with isi mark , pvc earthing cable 1 sqmm , ceiling rose , change over switch 32 amp dp , gi wire 14swg , black screw 15mm pkt of 500 nos , flexible conduit pipe 20mm dia , led bulk head fitting , lightening conductor jelly filled complete set , double bunk of size 6 feet x 3 feet , steel locker of size 750x600x950mm half hanging and half shelving , looking mirror of size 1200x750 x 3.5mm , provision of fire extinguisher 6.0 kgs abc dry powder stored pressure type , 25 mm dia drapery rod 1500mm each with both end socket and brackets , 3 kw roof top solar system on the roof , water dispenser mini magic super tt of capacity 20 ltr with bottle , cement in polythene bags 50 kgs opc 53 grade , crushed stone aggregate 20 mm graded confirming to is 383 to 1970 , coarse sand confirming to is 383 to 1970 , hard core of broken stone aggregate of size 45 to 63 mm , rr stone , cement white make , vitrified colour tiles 8 to 10 mm thick square or rectangular polished area of each tiles not exceeding 0.36 sqm including colour pigment as required for joints. , quick setting compound , water proofing compound , 3mm thick app membrane as per ts , bitumen primer ready to apply for laying of app membrane , silicon sealant with gun , multipurpose expandable pu foam as per ts , connected stores as per final design

CTN :40523852

12 Jun, 2025 NA

Bandhavgarh - Madhya Pradesh

Tender For supply of concrete , crusher stone , providing and laying 80 mm paver block , excavation

CTN :40523854

12 Jun, 2025 NA

Bandhavgarh - Madhya Pradesh

Tender For excavation , crusher stone , providing and laying 80 mm paver block , concrete

CTN :40523855

12 Jun, 2025 NA

Bandhavgarh - Madhya Pradesh

Tender For excavation , crusher stone , providing and laying 80 mm paver block , concrete

CTN :40528139

13 Jun, 2025 50.0 Thousand

Balaghat - Madhya Pradesh

Tender For supply and laying of metal crushed stone up to 6.5 to 10 mm for various road repair work under municipal council baihar distt balaghat

CTN :40536811

16 Jun, 2025 NA

Mettur - Tamil Nadu

Tender For mtps-i ?? chp-i ?? deep screening, through packing, lifting the track line, ballast deficiency makeup work with 40mm hard broken stone ballast, grinding the elongated edges of rails and reversing the grounded rails into its position in wagon tippler iii inhaul to a length of 226 mtr after level crossing and breaking the embedded damaged concrete, removing coal powder on the track lines, removing the concrete sleepers, providing bed pcc mix 1:4:8, laying the psc sleepers (drg.no:t2496), rails with fittings, check rails at level crossing and providing pcc concrete 1:2:4 to a length of 45 mtr in wagon tippler iii inhaul etc.

CTN :40514350

06 Jun, 2025 7.92 Crore

Jhajha - Bihar

Tender For mr-n/25-26/jhajha/02 - basbutiya to basahara road, providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i, scrarifying existing bituminous surface to a depth of 150 mm and disposal disposal of scrarified materials with a lift upto 3m and lead upto 1000m as per technical specification clause 301.4, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.3 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503., providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of dry lean concrete sub base over a prepared sub grade with coarse and fine aggregate conforming to is 383 , the size of coarse agg. not exceeding 25mm , agg. cememt ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 , cement content not to be less tha

Central Government/Public Sector

CTN :40025422

31 May, 2025 NA

Bangalore - Karnataka

Tender For bid to ras supply of supply of networking item - 1 inch hdpe pipe , supply of 12 core multimode outdoor armoured fiber , supply of 24 core multimode outdoor armoured fiber , supply of fully loaded liu pigtails , supply of jpu fully loaded , 24 port cat 6 utp jackpanel , supply of cat 6 single information outlets with backbox and shuttered face plate commscope , supply of cat 6 dual information outlets with backbox and shuttered face plate commscope , supply of cat 6 shield metal field keystone jack commscope amp molex systimax panduit , supply of cat 6 shield metal field rj45 plug commscope amp molex systimax panduit , supply of cat 6 utp patch cord 1 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 2 meter red green commscope amp molex systimax panduit , supply of cat 6 utp patch cord 3 meter red green commscope amp molex systimax panduit , supply of modular concealed gi metal box , supply of 1 inch pvc flexible pipe with accessories , supply of 1.5 inch pvc flexible pipe with accessories , supply of 2 inch pvc flexible pipe with accessories , supply of cat 6 utp cale box 305 meter commscope amp molex systimax panduit , supply of 1 inch conduit pipe , supply of 1.5 inch conduit pipe , supply of 1 inch casing and cappinng , supply of 1.5 inch casing and cappinng , supply of 2 inch casing and cappinng , supply of 2 inch gi pipe , supply of 1 inch ms pipe , supply of 6 2 inch raceway casing white , supply of 4 2 inch pvc casing white , supply of 2 2 inch pvc casing white , supply of 9 u wall rack with pdu and accessories , supply of 15 u wall rack with pdu and accessories , supply of 27 u floor mounting rack 800x800 with pdu and accessories , ofc laying with hdpe pipe with digging soft soil and refilling 3 feet x 1 feet approx , ofc laying with hdpe pipe with clamping required material clamping nail etc .should be provided by the vendor 3 feet x 1 feet approx , ofc laying with hdpe pipe through hdd , consruction supply and installation of cement chambers with covers 2.5ftx2.5ftx2.5ft , supply and fixing of ofc route markers stone , installation of liu , splicing and testing of pigtails , installation of utp jack pannel , laying of utp cable per meter , groove cutting in walls floors and fixing pvc 1 1.5 inch pipes , groove cutting in walls floors and fixing of modular concealated gi metal box metal box covering them , termination of i o box and fixing of face plate , laying of 1in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in conduit pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 1 incasing and cappinng required material screw gatta bend collar junction box should be provided by the vendor , laying of 1.5in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in casing and capping required material screw gatta bend collar junction box should be provided by the vendor , laying of 2in gi pipe required material screw gatta bend collar junction box should be provided by the vendor , laying of 6 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 4 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , laying of 2 2 in pvc casing required material screw gatta bend collar junction box should be provided by the vendor , ofc outdoor 12core splicing kit with necessary consumables and enclosure , ofc otdr test per core bid details/ 2 / 43 charges with report , network and server support deploying of 5 service engineers

Plasterboard Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector