Latest plastic roll Tenders | Government plastic roll Tenders

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

CTN :45261680

30 May, 2026 NA

Leh - Jammu And Kashmir

Tender For supply of r400 presenter , charger 80w , cello tape packing 2 inch , plastic roll , bubble wrap , corrugated sheet cardboard , printer pad

corporations/Associations/Others

CTN :45236853

25 May, 2026 2.65 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in leisure valley, sector 10 a, ward no. 2, chandigarh under mplads. ln/mp18047/2024-2025/116. - providing and fixing of chest press double complete in all respects having following specifications. size / dimensions length -1200 milimeter width- 700 milimeterheight 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometer warranty - 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars complete in all respects having following specifications.size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the vertical or standing pipes shall be 40 mm nb with a thickness of 2.9 mm, and the horizontal pipes shall also be 40 mm nb with a thickness of 2.9 mm. the foundation pipe shall consist of a gi pipe anchored 500 mm deep and supported with a mild steel (ms) angle of 25 25 4 mm. the nominal bore of the foundation pipe shall be 40 mm nb with a thickness of 2.9 mm. the ms foundation plate shall have a minimum thickness of 12 mm. all nuts and bolts used for assembly shall be made of stainless steel to provide durability and resistance to corrosion. the open ends of all pipes, bearing bushes, and bases shall be fitted with fibre-reinforced plastic (frp) caps having a minimum thickness of 2 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance under outdoor conditions.colour:- paint finish- power coated, uv resistant paint coating thickness (min) 80 micrometer warranty - 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of three wheel shoulder builder/ arm wheel- outdoor gym equipment complete in all respects having following specifications. size / dimensions height of central pole from ground -1524 millimeter outside diameter of first wheel - 850 millimeter outside diameter of second wheel - 800 millimeter outside diameter of third wheel - 650 millimeter height of first wheel from ground - 1220 millimeter height of second wheel from ground - 1200 millimeter height of third wheel from ground - 1180 millimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure quality

Private Sector

CTN :45204923

24 May, 2026 NA

Hapur - Uttar Pradesh

Tender For disposal of fire affected ms scrap including roof sheets -50000 kgs, category 2: disposal of fire affected fully damaged solar panels-150 kgs, category 3: disposal of fire affected fully damaged plant & machinery-1000 kg. category 4: disposal of fire affected stock of plastic rolls-300 kg, category 5: disposal of fire affected stock of paper rolls-200 kg, category 6: disposal of fire affected stock of polymers granules-300 kg, category 7: disposal of fire affected stock of plastic threads-100 kg, category 8: disposal of fire affected variety of wire/cable(s)-100 kg

Private Sector

CTN :45205041

26 May, 2026 NA

Hapur - Uttar Pradesh

Tender For disposal of fire affected ms scrap (iron) including roof sheet approx 31500 kg, category 2: disposal of fire affected plant & machinery approx 12000 kg. category 3: disposal of fire affected variety of cable/wire(s) (aluminium, copper etc.) approx 50 kg, category 4: disposal of fire affected stock of hdpe plastic rolls approx 1000 kg. category 5: disposal of fire affected fff including fire fighting equipment's, air conditioners etc. approx 75 kg

corporations/Associations/Others

CTN :45151622

18 May, 2026 9.74 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of children play equipments, open air gym, in various parks in dhanas, chandigarh, under wdf - providing and fixing of swing ( 2 seater) 10 long 8 -6 high & 5 -0 wide made out of 2 m.s. pipe completed as per drg no. 02 job no. m-06 and to the entire satisfaction of engineer-in-charge, providing & fixing of wide slide ssarea : 3.9 m x 1.3 msafe play area : 4.9 m x 2.3 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made up of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angle. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder is made are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., providing & fixing of multi activity play system (ii) (maps ii):deck 3 ht. 1 deck 2.5 ht. 1 frp staircase 3 ht. 1 frp curve slide 3 ht. 1rainbow ladder 1 double swing 1 bubble pannel 1 steering 1area: 7mx5m safe area: 8mx6m 1. deck 3 height & 2.5 height - the deck of maps is made up of 4mm thickness fiberglass reinforced plastic. the top of the platform shall be made up of anti skid surface with multicolored pigment resign. all the attachments is through nylon clamps only. the size of platform is 1.6mx1.6m. 2. frp stairs case - the ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. it should have reinforcement to maintain strength and avoid bending. 3. frp curve slide- it is made up of 4mm thickness fiber reinforced plastic. 4. rainbow ladder- it is 5 long in height, the main frame of ladder is made up 20 nb g.i. pipe and risers are made up of 40 nb g.i. pipes. 5. double swing.-leg support in 40 nb g.i. pipe and top pipe is made up of 50 nb g.i. pipe seat is made up of 10 mm reinforced rubbers and g.i. pipe should be rubber coated and movement with nylon clamps at top. 6. bubble panel.-the railing is providing to all decks for safety and it is made up of lldpe. 7. steering wheel-it is made up of lldpe., providing and fixing of chest press double complete in all respects having following specifications. size / dimensions- length -1200 milimeter, width- 700 milimeter, height 1800 milimeter maximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green, paint finish- power coated, uv resistant, paint coating thickness (min) 100 micrometer, warranty - 3 years. co

CTN :44948840

11 May, 2026 NA

Leh - Jammu And Kashmir

Tender For corrigendum : supply of r400 presentation , charger 80w , cello tape packing 2 inch , plastic roll , bubble wrap , corrugated sheet cardboard , printer pad

Central Government/Public Sector

CTN :45034507

09 May, 2026 NA

Uttara Kannada - Karnataka

Tender For tender for supply of stationery - chart sheet sky blue (sky blue , light green , yellow & pink) , brown binding paper , box folder , calculator , cd/ohp marker (red , green , blue , black) , aaa battery , cello tape 1 inch , masking tape 2 inch , a4 colour paper , double side tape , eraser , sharpener , glue stick , fevicol tube , l shape folder pack of 20 sheet , lamination sheet a4 , noting paper , ball point pen (blue , black & red) , 2b pencil , hb pencil , plastic roll for book binding , plastic floder 2d clip , register 300 pages , register 400 pages , plastic scale 30 cm , steel scale 30 cm , scissor big size , scissor medium size , sticky note plastic flag , single punch , stamp pad , stapler hp-45 , stapler pin 24/6 , stapler no. 10 , stapler pin no. 10 , tape dispenser , uniball pen (blue , black , red & green) , pilot v7 hi-tecpoint roller ball pen with cartridge system (blue , black , red & green) , white board marker (blue , black & red) , whitener , exam board plastic , photo paper , key chain tag , tracing paper , executive folder , signature folder , post it pad/sticky note , carbon paper , file tag (8 inch) 50 pcs bundle , file tag (12 inch) 100 pcs bundle

CTN :44982471

08 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of "providing, supplying and placing of storage unit. overall size shall be 916mm(w)x486mm(d)x1981mm(h) with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. these components shall be made of crca ‘d’ grade high yield strength as per is:513. it should have a mazak handle and three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns (+/- 10). plenty of colour options and shelving options shall be available. the product should be certified by greenguard gold, iaq gold, greenpro & griha. " , "providing, supplying and placing of storage wooden cabinets. overall dimensions is 900mm(w)x450mm(d)x735mm(h) . the top shall be wooden top plb(25 mm add in unit height ) .the rigid knock down construction , back , sides and door shall be made from 0.7 mm high yield strength crca ,rest in 0.8 mm crca . crca - 'd' grade as per is-513 . sliding door arrangement shall have sliding door wth top hanging arrangement to prevent derailment . each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . locking shall be 5 lever cam lock for safe locking . handle shall be plastic flush & recessed handle . shelving shall have height wise adjustable shelf mounting . uniformly distributed load capacity of the shelf is 40 kg maximum . adjustable full shelf . accessories optional shall be cradle with pipes for hanging instadex files . leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . for vsdu 2 - a4 size box file can be stored vertically on one shelf and clear space above second shelf is 220 mm . the product should be certified by greenguard gold,iaq gold,greenpro. , providing, supplying and placing of high back chair. seat/back assembly: the seat is made up of 1.5 ±0.1cm. thick hotpressedplywood and upholstered with fabric upholstery covers and moulded polyurethane foam.the seat has extra thick foam on front edge to give comfort to popliteal area. the back is injection moulded in glass filled polypropylene which is upholstered withmesh fabric.the back consist of adjustable lumbar support made of injection mouldedpolypropylene having an adjustment of 5.0 ±0.1 cm. the chair seat & back size are *seat size 53.5 cm. (w) x 51.0 cm. (d)*mesh back size 51.0 cm. (w) x 70.0 cm. (h) high resilience (hr) polyurethane foam: the hr polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf as per is:7888 for 25% compression. armrests :the adjustable armrest is designed with the following features :· up-down adjustment– 6 steps (7.2 ± 0.5cm range) · armrest top is mounted on armrest structure made of glass filled nylon· armrest top is pu moulded over glass filled nylon insert. center tilt synchro mechanism with multi lock : the mechanism isdesigned with the following features: · 360° revolving type. ; · 3 position locking with anti shock mechanism.; · tilt tension adjustment pneumatic height adjustment: the pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm. pedestal assembly : the pedestal is injection moulded in glass-filled nylon andfitted with 5 nos. twin wheel castors. the pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). twin wheel castors : the twin wheel castors are injection moulded in black nylon. width (w): 76.1 cm. ; depth (d): 76.1 cm.; height (h): 117.0 - 130.0 cm.; seat height (sh): 44.5 - 54.0 cm. the product should be certified by green guard gold, bifma level 2, iaq gold & greenpro , materialframe: mild steel, powder-co

CTN :44300247

11 Apr, 2026 NA

Patti - Punjab

Tender For bid to ras supply of ball pen ordinary black , ball pen ordinary blue , ball pen ordinary green , ball pen ordinary red , brown tape , binder clip 15mm , binder clip 19mm , binder clip 32mm , binder clip 48mm , box folder , carbon paper , cello tape 1 inch , cello tape 3 inch , chart paper , clip board , correction pen , cotton tag 8 inch bundle of 100 , correction tape , damper , decorating ribbon , double punch , double sided tape , drawing pin , duster magnetic for white board , envelope se 6 pack of 100 , envelope se 6a with cloth pack of 100 , envelope se 7a with cloth pack of 100 , envelope se 8a with cloth pack of 50 , envelope white colour size 12x9 point 5cm , eraser assorted , fc display folder , fevi quick , fevicol tube 22g , gel pen assorted , glue stick , gum bottle , heavy duty double punch , highlighter pack of 5 nos , insertion sheet , l folder , lamination sheet a4 , lamination sheet a3 , magnetic button pack of 10 , marker ink refills , masking tape , ohp marker , orange cover roll , paper clip , paper cutter , paper pin , paper weight , patti folder , pen stand , pencil assorted , photo paper , pilot pen v5 , pilot pen v7 , pin cushion holder , plastic roll for cover , pmt marker blue , pmt marker black , poker , post id pad 3 inch 2 inch 3mm , post id pad 3 inch 3 inch 3mm , post id pad 3 inch 4 inch 3mm , post id pad 3 inch 5 inch 3mm , post it tri colour pad , register 2qr , register 3qr , register 4qr , register 5qr , register 6qr , ring folder , scale plastic , scale metal , scissor , sharpner , signature folder , single punch , stamp pad , stamp pad ink , stapler big hd 45 , stapler machine no 10 , stapler machine no 24 per 6 , stapler pin no 10 , stapler pin no 24 per 6 , sketch pen pack of 12 , spiral binding sheet , table sharpner , table dispencer , tag large 100 cms , u clip 35 mm , uniball pen ub 157 black , uniball pen ub 157 blue , uniball pen ub 157 green , uniball pen ub 157 red , vip leather folder , waste paper basket , white board marker blue , white board marker black , white board marker red , white board marker green //bid details2 / 75

Plastic Roll Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Private Sector

Private Sector

corporations/Associations/Others

Central Government/Public Sector