Latest plastic chain Tenders | Government plastic chain Tenders

Corporations And Associations And Others

CTN :45488872

06 Jul, 2026 NA

Jalandhar - Punjab

Tender For corrigendum : supply of chain and chain spares - csm bhogpur, bagasse elevator chain & its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both sides) as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. mh pcc r1, inner link r.h & l.h as per drawing no. mh pcc r1, cane carrier slates as per drg no. mh-517, inter-rack carrier chain& its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, secondary carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, csm nawanshahr, supply of secondary carrier chain spares as per drg. no. 183 r3material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1), side link (fig no. 2), side link (fig. no. 3), roller (fig no. 4), pin (fig no. 5), bush (fig no. 6), slats (fig no. m- 316r), supply of rbc chains as per drg. no. m- 263rmaterial of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 tonsupply of spares for r.b.c. chain as per drg. no. m-263 r1, side link for bush (fig no. 1), side link (round hole) ( fig no. 2), side link (one side cut hole) (fig no. 3), side link for attachment ( fig no. 3 a), attachment no. m 111r2, roller (fig no. 4), bush (fig no. 5), pin (fig no. 6), rake (grill type) as per drg. m-111r3, pin for rake as per drg m-111r4, supply of forged link chain 229 mm pitch as per drg. no. m-305specification:material of forged block - en 30 bmaterial of pin & bush - 16ni3cr2pin hardness - 50 5hrcbush hardness - 40 5hrcbreaking load - 70 ton, csm batala, pin for rbc as per drawing no. bcsm/mh/01, bush for rbc as per drawing no. bcsm/mh/01, roller for rbc as per drawing no. bcsm/mh/01, pin for mbc as per drawing no. bcsm/mh/01, bush for mbc as per drawing no. bcsm/mh/01, roller for mbc as per drawing no. bcsm/mh/01, pin for elevator as per drawing no. bcsm/mh/01, bush for elevator as per drawing no. bcsm/mh/01, roller for elevator as per drawing no. bcsm/mh/01, pin for cane carrier as per drawing no. bcsm/mh/01, bush for cane carrier as per drawing no. bcsm/mh/01, roller for cane carrie

CTN :45704070

14 Jul, 2026 NA

Saharanpur - Uttar Pradesh

Tender For providing of custom bid for services - removal of sugarcane fallen from the cane carrier and placing it back onto the carrier chain similarly collection of bagasse fallen from the rake carrier and feeding it back into the chain along with cleaning of the surround..

CTN :45666916

03 Jul, 2026 NA

Ambala - Haryana

Tender For supply of bagasse and cane carrier chains, spares and slates 150mm pitch bagasse carrier chain, 229 mm pitch forged block type chain, 150 mm pitch cane carrier chain

Corporations And Associations And Others

CTN :45565295

06 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For rco for supply of plastic chain link

CTN :45525996

23 Jun, 2026 NA

Rohtak - Haryana

Tender For chain and chain spares - assembled chain for cane carrier, as per drg., assembled chain for b/c complete, as per drg., attachment link for mcc, as per drg., bush for cane carrier chain, as per drg., bush for forged link of irc 25mm, as per drg., bush for forged link of irc 44mm width cre-2722, as per drg., chain for main rack carrier, as per drg., forged attachment link, as per drg., forged attachment link for irc, as per drg., inter carrier chain pin with nut, as per drg., link plates for bagasse elevator, as per drg., pin for bagasse carrier for mbc rakes, as per drg., pin for cane carrier chain, as per drg., rakes for irc, as per drg., rakes for mbc, as per drg., roller for cane carrier, as per drg., slate for cane carrier, as per drg., slats for be, as per drg., theaded pin for bagasse elevator for bagasse elevator slats, as per drg.

Central Government/Public Sector

CTN :45506772

01 Jul, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of plastic chain

Co-operative

CTN :45415201

10 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For fabrication and erection -replacement of the 2" x 2" square bar rails installed on the cane unloader. removal of the old juice gutter from 'a' mill, fabrication and installation of a new one, and conducting a successful trial run. removal of the old m.s. juice tray from 'a' mill, and fabrication and installation of a new one using m.s. plates. fabrication and installation of a new gear guard in the 'a' mill house. welding of worn-out teeth on the mill pinion as required, followed by grinding to a smooth finish. repair of damaged/worn parts of the tail bar coupling by welding as required, followed by grinding. repair of damaged/worn parts of the tail bar by welding as required, followed by grinding. comprehensive repair of the d.s.m. screen: cutting out and removing corroded sections, fabricating and fitting new replacements, repairing all internal piping, and conducting a successful trial run. thorough cleaning of the cane carrier slats, along with their attached links, pins, rollers, and bushes; followed by greasing and refitting said components into the slats in their proper positions. thorough cleaning of the slats, links, pins, bushes, and rollers of the primary/secondary cane carrier chains; followed by greasing, assembling the chain components, and preparing the chain as per instructions. fabrication and installation of juice rings for the rollers. fabrication and installation of mill bearing guards using 3 mm plates. fabrication and installation of m.s. scrapers for the under-feed rollers. cutting of chevron grooves into old mill rollers as required. cutting of chevron grooves into new mill rollers as required. creating 'dots' on the top and feed rollers of the mill using arc-welding electrodes, as per instructions. [repair/replacement of] m.s. components for the worn-out teeth of the under-feed rollers. cutting out patches from a plate and installing them as new teeth. performing arc welding on the grooves of rollers used in the mills using electrodes, as per instructions. fabricating side juice guards for mill rollers from 3 mm plates, as per instructions. fabricating an under-feed roller for the mill in accordance with the provided drawings. dismantling a damaged or defective juice tank in the mill house; fabricating and installing a new tank in its place, and conducting a trial run. replacing or repairing the damaged sections of a defective juice tank in the mill house. dismantling and replacing the bottom plate of a damaged or defective juice tank in the mill house. cane carrier / bagasse carrier / bagasse elevator / cross bagasse carrier / r.b. c. removal of the cane carrier side plate and installation of a new plate. a. welding or forging the enlarged pin holes in the links of the cane carrier, bagasse carrier, etc., to match the specific pin size. a. removal of broken runners from the cane carrier, inter-carrier, bagasse elevator, return bagasse carrier, or cross bagasse carrier, and installation of new runners in their place. a. removal of old, damaged cane carrier slats and installation of new slats. a. the task of drilling holes in new slats for the cane carrier and inter-carrier. a. straightening and repairing cane carrier slats as required. a. repairing damaged and weakened hoods of the cane chopper, cutter, and fibrizer in accordance with instructions. a. removal of old, damaged cane carrier slats; straightening the damaged slats; cutting out the damaged sections; and repairing them by welding in new or salvaged slat pieces cut to size, thereby restoring the slats to their proper dimensions. a. welding the enlarged holes in the inter-carrier links and re-drilling them to the correct size to match the rivets. a. filling the enlarged holes in old inter-carrier slats by welding, and subsequently re-drilling them to create new holes in accordance with the engineering drawings. a. removal of the damaged band from the inter-carrier clutch shaft, fabricating and installing a new one, and conducting a satisfactory

State Government

CTN :45356804

08 Jun, 2026 40.0 Thousand

Mandala - Madhya Pradesh

Tender For supply of high visability reflective vest (q3) , plastic chain (q3) , queue manager (q3) , wind sock (q4) , traffic cone (q3)

CTN :45314260

01 Jun, 2026 NA

Jind - Haryana

Tender For supply of chain and chain spares - spares for inter carrier chain as per drg. no. mill-15 in respect of material & dimensions 1. inter carrier chain link (cast steel/ forged steel), pin for inter carrier (16ni3cr2, hardness 35 -45 rc), slate for inter carrier, spares for cane carrier chain as per drg. no. mill-22 in respect of material & dimensions bush for carrier chain ( material- 16ni3cr2, hardness 35-45), pin for cane carrier chian ( material- 16ni3cr2, hardness 35-45), side bar-a ( pin lock) for cane carrier chain ( high carbon steel), side bar-b ( pin round) for cane carrier chain ( high carbon steel), side bar-c ( bush) for cane carrier chain ( high carbon steel), slate for cane carrier chain (jcs 050), spares for bagasse carrier chain as per drg. no. blr-02 in respect of material & dimensions 1. bush for bagasse carrier chain ( material- 16ni3cr2, hardness 35-45), pin for bagasse carrier chain ( material- 16ni3cr2, hardness 35-45), roller for bagasse carrier chain (hardness 35), side bar a for bagasse carrier chain ( bush type) ( high carbon steel)., side bar b for bagasse carrier chain ( pin lock type) ( high carbon steel)., side bar c for bagasse carrier chain ( round pin type) ( high carbon steel).

CTN :45261531

01 Jun, 2026 NA

Udhampur - Jammu And Kashmir

Tender For supply of drive shaft with oil slinger , disc pad , oil filter , steering ball joint , steering tie rod end , silencer assy , timing belt , kit pad assy front , air intake hose , rear door beeding , bulb 12h7 55w headlamp , air filter , ac filter , fuel filter , speedo drive complete plastic , chain sprocket kit , belt tensioner , belt water pump , brake pad , shocker mtg pad , thermostate housing assy , air filter element , assy oil filter

Plastic Chain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Corporations And Associations And Others

Central Government/Public Sector

Co-operative

State Government