Latest plastic clamp Tenders | Government plastic clamp Tenders

Central Government / Public Sector

CTN :45167301

30 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For corrigendum : supply of supporting hook for screw coupling to icf drg no : t-2-3-013, col. i alt : k / 3.[ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :45557036

30 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of supporting hook for screw coupling to icf drg no : t-2-3-013, col. i alt : k / 3.[ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45545657

15 Jun, 2026 NA

Asansol - West Bengal

Tender For supply of set of spares for 30 ton memu lifting tackle supporting bracket with bolt & nut as per drg no. mw/memu/208/asn, as per drg no. mw/157/trs/asn sheet 6 & 7. one set consisting of (1) 30 ton memu lifting tackle supporting bracket = 4 nos. (2)b bolt & nut = 08 nos. (3) pin for hook as pere = 02 nos. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45471157

22 Jun, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply of supporting hook for screw coupling to icf drg. no. t-2-3-013 col.i alt .k/.3. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45427476

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to civil hospital jawalamukhi by providing 11/0.4 kv, 400 kva dtr a/w 11 kv ht line in electrical section amb under esd hpsebl no-i jawalamukhi, ed jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.065 km), steel tubular poles 11 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm x2 no., x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, eye hook for earth wire, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, 11 kv g.o. switch, d.o fuse unit, aluminium paint, red oxide point, supply part of 11/0.4 kv 400 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble 300 sq mm, copper thimble 95 sq mm, danger plate, barbed wire, lt cable 3.5 core 400 sq. mm, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, ct pt combined unit, energy meter (3-ph, 4-wire) dlms compliant 1000/5 a ct type for 400 kva dtr, pvc multistrand 2.5 sq mm copper wire, ms angle iron (50x50x6 mm) length 2800 mm x 4 nos., ms angle iron (50x50x6 mm) length 450 mm x 2 nos., erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 400 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 400 kva dtr

Central Government/Public Sector

CTN :45400956

09 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting of buffer plunger with or without spindle, buffer socket, drake beam and truss bar, nut- bolt, rivets, pin, bush, small die, inner race, outer race, suspention strip, washer, door hinges, door roster, ff or rf, hb wheel, side bearer plate, yoke plate,, bottom plate, sbs plate, anchor plate. hb lever, be lever, bc link, empty axle box, axle box cover, axle box housing, foot step, briddle bar, striker casting, back stopper, empty load box, main hole cover, shackle, shackle pin, screw cupling, bearing long shaft, cbc parts of coaches with undetchable nylon bush and other nylon items, shackle stone, coil spring, locking plate, shaft, operating handle, draw bar, broken coil spring up to four coil, front and rear plate, vertical support assly, main pin of cbc shank, manual uncoupling handle, wedge lock cbc parts of coaches, vertical supporting device for cbc, anti roll bar of lhb coaches, plunger, foot step, bb hanger, eq lever, bk shoe, striker casting, brake shoe head, bk.shoe key, sielent block yoke pin support plate, lashing chain, buckle, roller backing ring, spacer, distance ring, cone assly and other parts of ctrb wire supporting hook, prptecting tube, silent block all type, l.s. beam, knuckle pin, knuckle plate, front and back cover of door cylinder clamp, bearing pieces, silent block all type, sab complete and sab loose part, sab rod, and all type rod released from wagons loose and attached, control rod.coupler rod, cbc rear plate, roller, cone, backing ring, spacer, distence ringsmall cut pieces of s.s., bracket, upper and lower part of control arm of lhb coaches and other ferrous melting category items, with or without minor undetachable non-ferrous attachment. [qty on approx basis). as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

CTN :45352757

08 Jun, 2026 11.41 Lacs

Sikar - Rajasthan

Tender For street light accessories and phase wire work in losal area - work, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a"attached with this bsr ., 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of following lt supporting accessories with nut bolt & clamps made out as per standard discoms specifications with two coats of red oxide and two coats of aluminium paint etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, suspension clamp with eye hook & pole clamp, dead end clamp with eye hook & pole clamp, p & fixing powder coated crca sheet enclosures on existing angle iron frame by means of nuts and bolts and making holes , din rail etc. as required.for additional technical parameters of product / work refer annexure a attached with this bsr, 2.0 mm thick, providing & fixing of ac operated heavy duty 230 /440 volt power contactor as per pwd specification for electrical works, isi marked is/iec 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, din rail mounting type including making connections, testing etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 4 pole power contactors with following ac 1 rating 63 amp, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection, programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., one day & week reserve (analog type ), sitc of 3 /4 pole current limiting moulded case circuit breaker (mccb) made of flame retardent & heat resistant material having following current rating, short circuit breaking capacity at 440/415 v, 50 hz; o/l & s/c settings , conforming to is/iec 60947 p -2 :2003 with front face and centralised adjustable, trip free mechanisum, true contact position indicator, line load interchangeability, designed for both horizontal & vertical mounting without any adverse effect on electrical performance, suitable for operation upto 55 degree and without derating upto 40 degree, pollution degree 3, having positive isolation capability, push (test) to trip, trip time less then 10 ms under s/c condition, breaking capacity ics = 100% icu. u imp =8 kv, rated insulation voltage 690 v. provision for uvr , shunt trip , earth fault trip, door interlock, pad lock & rotary handle , including making connections etc. as required.oem shall have submit nabl / cpri / erda accrediated lab type test certificate before execution all as per pre approved by engineer in-charge. for additional technical parameters of product/ work refer annexure a attached with this bsr, 4 pole mccb with thermal magnetic release up to 100 amp , 10 ka, fixed o/l & fixed s/c setting, pipe earthing as per is:3043- 1987 with 3.0 mtr. long, 40 mm dia. b class g.i. pipe is: 1239 (part-1) 2004, equivalent to bs : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and heavy duty weather proof poly-propylene earth pit chamber with lockable jam free lid suitable for safe working load 5000 kg or more of size top dia. 225 to 260 mm, bottom dia 300 to 350mm. and height 250 to 300 mm. and embodying the pipe compl

Central Government / Public Sector

CTN :45337157

04 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For supply of supporting hook for screw coupling to icf drg no : t-2-3-013, col. i alt : k / 3. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45313275

04 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - released mixed ferrous scrap: cutting pieces of engine block, bull gear, scrapped bogie parts ( bss pin, yoke pin, anchor link, silentent block, bss pin, yoke pin, anchor link, silentent block, bss hanger, circlip, anchor link bracket, lower spring seat, bearing, break beam etc., ) megi side bearer, spring, coupler spring, condemned alternator, gear, break disc, after cooler, housing pump, casing, armeture, push rod, cylinder head, nut bolt, pipes, cbc and screw coupler, coupler head assembly, carrer plates front and rear, supporting device, buffer plunger, protective tube, bogie bracket, break beam, hook and clamp, knuckle, m.s.plate and other miscellaneous mix ferrous scrap. excluding steel and aluminium. note 1. re-punching with other lots will not be allowed. 2. lading will be start at 09.00 a.m. loading will not be allowed after 15.00 hrs.

Central Government/Public Sector

CTN :45078153

27 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of supporting hook for screw coupling to icf drg. no. t-2-3-013, alt. k/3, item no. 1 and 3. material and specification as per drawing. [ warranty period: 30 months after the date of delivery ]

Plastic Clamp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors