Latest plastic clip board Tenders | Government plastic clip board Tenders

corporations/Associations/Others

CTN :45328177

05 Jun, 2026 62.00 Lacs

Kaushambi - Uttar Pradesh

Tender For supply of materials and erection for shifting of control room pannel at 33/ 11 kv sub station bharsawa distt. kaushambi under deposit scheme on turnkey basis under edc, kaushambi - name of work: supply, carriage & erection of materials for control room pannel shifting of shiffting of 33/11 kv s/s bharsawa distt. kaushambi, supply of centralised materials, 11 kv switch gear 600/300/5a 350 mva i/c, 11 kv switch gear 200/100/5a 350 mva o/g, 11 kv 3x300 mm2 xlpecable, 11 kv 3x120 mm2 xlpecable, 24 volt battery, 24 volt battery charger, pcc. 8.5 mtr. long for feeder, 11 kv tpmo switch with fixing clamp, 11 kv top channel, 11 kv dropper angle, earthing complete, stay set complete, 11 kv polymer pin insulator, 11 kv polymer disc insulator, 11 kv disc fiting, 33 kv control panel t/f, acsr weasel conductor, supply of de-centralised materials, 11 kv 3x120 mm2 xlpe cable jointing kit o/d & i/d, control cable 4x2.5 mm2, control cable 2x2.5 mm2, g.i. pipe 6 " dia, rubber matting, clamp with nut & bosts, earth wire clamp for pcc pole, stay clamp for pcc pole, top channel clamp pcc pole, dropper channel clamp pcc pole, g.i. strip 35x6 mm, carriage of following material, pcc pole 8.5 mtr. long., structure of la, 33kv isolator, 33 kv cts, single t/f control pannel, 33kv vcb,11 kv outgoing. incoming pannel, battery & battery charger and other associated accessiories etc. (availibility at concern store center of store division), erection work, installation of 33 kv single transformer control pannel 2 no., incoming 2 no. and 7 no. outgoing in the switchgear room and grouting the pannel by rag bolt using cement, sand mortar in ratio 1:3. work includs fitting of all accessories in all respect with complete connection of control cable with pannel. all material will be provided by the contractor except vcb and crp., construction of cable trenchs with top cover and laying of control cable for vcb, c.t. & t/f control pannel etc. as per direction of engineer. trenchs to be 12 wide and 9 deep. work includes digging, of trench, concreting of the foundation in the ratio 1:3:6 r.b. wall 9 wide with cement mortar 1:4 and plastering inside the trench in the ratio 1:3 and sand filling in the trench. all material will be provided by the contractor., earthing of 11 kv indoor equipments, switchgears as per resspo drawing. with g.i. strip of size 35x6 mm. g.i. strip fully welded at both ends and to be connected with earthmat,, erection of dp with pcc pole 8.5 mtr long with all accessaries and grouting of the pcc pole with cement, sand and brick ballast ratio 1:4:8 size 0.45x 0.45x 1.5 mtr deep under the ground as per drawing no. res-6.(cement, sand, brick, ballast shall be provided by the contractor.), installation of 24 volt battery and battery charger with cabinet in the switch gear room, by grouting base channel 100 x 50 x 6 x 1000mm. fixing of rag bolt., laying of 11 kv 3x300/3x185/ 3x120 sqmm. xlpe cable by digging 0.75 mtr. deep trench, putting layer of sand in the bottom, ramming it, laying of cable over it rmt and covering the cable from sides and top by laying bricks, finally covering the same by earth and levelling of the same, all the materials, except cable, will be pvovided by the contractor., fixing and termination of outdoor/ indoor heat shrinkable cable boxes of size 3 x300/3x185/3x120 sqmm. xlpe cable. boxes will be supplied by the contractor, sundries ( as per site requirement/emergency work), safe dismantling of 11 kv o/g pannel & received back to store, laying of weasel conductor with the help of aluminium roller by hanging three nos. on each support in a manner taking sufficient care to ensure safety of weasel conductor against rubbing on ground, precaution for safety of crops is also to be taken. the work includes jointing of conductor by providing jointing sleaves, stringing of conductor upto correct sag and binding of conductor with insulators on each support. all material shall be provided by contractor such as join

State Government

CTN :45118976

03 Jun, 2026 9.18 Lacs

Etah - Uttar Pradesh

Tender For corrigendum : supply of supply of stone pad , supply of ms angle iron , supply of top channel , supply of clamp , supply of e-bracket , supply of al pg clamp , supply of number plates , supply of danger board , supply of barbed wire g.i. , supply of bolts and nuts , supply of aluminium binding wire , supply of earthing complete , supply of 11 kv v type cross arm , supply of 11 kv bracket , supply of ms t off channel , supply of aluminium jointing sleave , supply of aluminium paint , supply of redoxide paint , supply of guarding angle , supply of guarding angle clamp , supply of irag bolt , safe carriage of stp pole 13 mtr , safe carriage of stp pole 11 metre , safe carriage of pcc pole 8.5 metre , safe carriage of a.c.s.r. weasel conductor , safe carriage of disc insulator , safe carriage of disc fitting , safe carriage of pin insulator , safe carriage of pin with nut , safe carriage of stay set complete , safe carriage of v type steel cross arm , safe carriage of g.i. wire , erection of st pole 11 mtr , erection of st pole 13 mtr , erection of pcc pole , erection of paint of pole , erection of danger board , erection of m.s. angle iron , erection of acsr weasel conductor , erection of barbed wire , erection of aluminium binding wire , erection of ms t off channel , erection of top channel , erection of number plate , erection of stay set complete , erection of g.i. wire 8 swg , erection of g.i. wire 6 swg , recieved back charges for carraige of dismantling material from site to store.

Central Government / Public Sector

CTN :44561247

30 May, 2026 NA

Patti - Punjab

Tender For corrigendum : supply of hardware carpentry material requirement c c - hardware_carpentory item chap konda security door guards , auto hinges small cupboard , 3 hinges for small cupboard shutter , 4 hinges plywood doors , drawer handle 5 , main door handle 6 , ambroasian tape , door latch tadi patti 10 , aldrop for door 10 , tower bolt 6 , door nut bolt bugdi , mosquito net , batten patti 1 , 32mm flush door 36 x 81 , welding rod , plywood 12 mm 4 x 8 , plywood 18 mm 4 x 8 , plywood 6 mm 4 x 8 , plywood 8 mm 4 x 8 , sunmica 1mm thk , fevicol container , araldite tube 180 gram , hexa blade , curtain socket , curtain rod , cloth hanger 6 hooks , door stopper , nails 14 no x 1.5 , nails 14 x 2 , nails 17 no x 1.25 , nails 19 no x 0.333 , nails 14 no x 1 , screw 50 x10 , screw 60 x 10 , screw 35 x 10 full thread , screw 35 x 10 half thread , full thread screw 35 x 8 , full thread screw 25 x 8 , full thread screw 19 x 10 , bathroom door bolt 3 , main door 32 x 81 , batten patti 0.20 x 0.5 , door magnet for cupboard , door closer , steel cutting blade , wooden cutting blade , drawer lock , steel welding rod , steel welding spray , concrete nail 3 , concrete nail 2 , concrete nail 1.5 , concrete nail 6 , binding wire

CTN :45327983

01 Jun, 2026 15.00 Lacs

Barabanki - Uttar Pradesh

Tender For 06/2026-27/ - deposit work(running work) in sub division masauli under edd ramnagar. - safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work., pcc pole /stp pole 8.5/11/13 mtr long, 11kv pin insulator ., 11kv disc insulator ., 11kv x-arm, ms earthing rod, transformer 25/63/100 kva, abc cable 3x50/95 sq. mm., abc cable 1x25+1x16 sq. mm., 11 kv xlpe cable 3x70++3x120+3x185 sqmm, acsr weasal conductor, lt d.b. box, 11 kv ct/pt unit, 11 kv metering cubical/pilfer, stay set complete, other line material, dragging of pole from je dump store to site, erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc., stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department), pipe earthing ( boring type 40 feet), installation of mounting of following capacity of transformer including its connection between 11 kv and lt line mounting provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor), mounting of 25/63/100 kva tranformer, installation of fixing 11 kv ct/pt with required meterial., installation of fixing 11 kv pilfer unit with required meterial., errection of substation type double pole with pcc /stp 8.5/11/13 pole mtr. long . including mounting of top channal dropper channel, base angle with clamps with nut & bolt, fitting of 33/11 kv pin & pin insulator., errection of single pcc /st pole for stringing, jumpharing and sagging of conductor 1/6 of total length of poles, stringing and sagging of lt 1x16 abc cable (lt abc cable will be provided by the department), stringing and sagging of lt 3x50 /95abc cable (lt abc cable will be provided by the department), installation of d.b. box, earthing of pole with ms earthing., provinding & fixing of various type materials. all materials shall be supplied by the contractor., nut & bolt, pg clamp, clamp for top/ dropper and t-off2/stay/lt etc., gi pipe 3"&4 dia, l t insulator, looping and choopping of tree branches in laying on the route of line., laying of 11kv xlpe cable 3x70, 120,185 sq. by mm manually, concreating and pilinthing of st& pcc pole 18x24 cm., fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc., looping of cable and mounting of pole., gaurding of 11 kv line, dismentaling of 11 kv line & poll, other line work

CTN :45327984

01 Jun, 2026 15.00 Lacs

Barabanki - Uttar Pradesh

Tender For deposit work(running work) in sub division ramnagar under edd ramnagar. - safe loading carriage including unloading and proper stacking of following materials from central store barabanki / je store to site of work., pcc pole /stp pole 8.5/11/13 mtr long, 11kv pin insulator ., 11kv disc insulator ., 11kv x-arm, ms earthing rod, transformer 25/63/100 kva, abc cable 3x50/95 sq. mm., abc cable 1x25+1x16 sq. mm., 11 kv xlpe cable 3x70++3x120+3x185 sqmm, acsr weasal conductor, lt d.b. box, 11 kv ct/pt unit, 11 kv metering cubical/pilfer, stay set complete, other line material, dragging of pole from je dump store to site, erection of stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, and stay insulate etc., stringing and sagging of 11 kv line with acsr weasal conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department), pipe earthing ( boring type 40 feet), installation of mounting of following capacity of transformer including its connection between 11 kv and lt line mounting provinding crimping type aluminium lugs of required size.( all the material except transformer will be arranged by the contractor), mounting of 25/63/100 kva tranformer, installation of fixing 11 kv ct/pt with required meterial., installation of fixing 11 kv pilfer unit with required meterial., errection of substation type double pole with pcc /stp 8.5/11/13 pole mtr. long . including mounting of top channal dropper channel, base angle with clamps with nut & bolt, fitting of 33/11 kv pin & pin insulator., errection of single pcc /st pole for stringing, jumpharing and sagging of conductor 1/6 of total length of poles, stringing and sagging of lt 1x16 abc cable (lt abc cable will be provided by the department), stringing and sagging of lt 3x50 /95abc cable (lt abc cable will be provided by the department), installation of d.b. box, earthing of pole with ms earthing., provinding & fixing of various type materials. all materials shall be supplied by the contractor., nut & bolt, pg clamp, clamp for top/ dropper and t-off2/stay/lt etc., gi pipe 3"&4 dia, l t insulator, looping and choopping of tree branches in laying on the route of line., laying of 11kv xlpe cable 3x70, 120,185 sq. by mm manually, concreating and pilinthing of st& pcc pole 18x24 cm., fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc., looping of cable and mounting of pole., gaurding of 11 kv line, dismentaling of 11 kv line & poll, other line work

CTN :45326912

08 Jun, 2026 NA

Ferozepur - Punjab

Tender For material and labour for construction of 334 mtr retaining wall (ht 5m) in ferozepur - excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil all as specified and directed., m&l for cement concrete 1:4:8 type d-2 as in foundation fillings and mass concrete complete all as specified ., m & l formwork to sides concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam, and similar work vertical or to batter complete all as specified., m & l formwork to faces of walls, retaining walls, abutments, parapet and stairecase railings and similar work including attached pillasters, butterssses, etc. vertical or to batter with feir finished surface complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in foundations, including raft, footings, foundation beams, plinth beams, bases of columns etc. basement slabs, under reamed piles and mass cincrete complete all as specified., m & l for m-30 (design mix) reinforcement cement concrete in walls, retaining walls, basements walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses complete all as specified., m & l for mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified., s&f for pvc (swr) 110mm pipes complete all as specified., returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, hand packing (gauge 40 to 80 mm) at back of walls over arches etc. and raising (or lowering) to the required level, hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, note: in case doubling/duplicancy of boq items , the lowest quoted rate shall be applicable for payment.

CTN :45316496

15 Jun, 2026 NA

Indore - Madhya Pradesh

Tender For procurement of annual rate for various type of tools, materials, machinery parts, minerals and medicine etc - axe in all size with handle (mhow made), rose cutter (falcon, sharpex or equivalent), bagad kainchi / hedge cutter (falcon, sharpex or equivalent), danda kainchi without gear (falcon, sharpex or equivalent), danda kainchi with gear (falcon, sharpex or equivalent), broom (jhadu) minimum 450 sticks, broom (jhadu dande wali) minimum length 5 feet + and 450 sticks, hand wash (in all size), nepkin towel (vip) minimun size- 1 feet x 2 feet, hot and cold plastic can minimum capacity 20 litter, chasme for safety purpose, face shield for safety purpose minimum 5 inch length, plastic drum minimum capacity 100 litter, plastic drum minimum capacity 200 litter, darate / gadase / bakke minimum weight 1 to 1.5 kg. with handle, garden sword (talwar) minimum weight 200 to 300 grams length 1 meter, width 2 to 3 inch, gum boot in all size, heavy shoes for tree cutting labour, hand gloves rubber, hath gadi two wheel, hath gadi four wheel, hath gadi wheel tube, hath gadi wheel tyre, janjeer iron 4 to 5 feet length rust proof minimum weight 400 grams, mattock (geti) minimum weight 1.5 kg. (tata or equivalent), mattock (geti) with iron handle minimum weight 2.5 kg., handle (mattock/shovel) minimum length 2.5 feet, shovel (fawada) minimum weight 1 kg. (tata or equivalent), shovel (fawada) with iron handle minimum weight 2 kg, mouth mask (isi mark), palti fawada / panja minimum weight 900 gram, pitra parvat name plate iron size 12 inch x 9 inch with 24 inch rod, plastic tub17 inch fresh material minimum weight 450 grams, steel tub 15 to 20 inch minimum weight 1 kg., safety helmet, spray pump battery operated, supdi iron / scoop spoon with handle (minimum capacity 400 gram), tourch (kishan or equivalent), trowel (khurpi) minimum weight 300 grams, water jhare minimum capacity 7 litter in thick plastic, kudali (small mattock) iron minimum weight 1.5 kg. and minimum length 1 feet 6 inch, bamboo (length 20 feet cylinderical 50 mm minimum girth), multi colour crystal pebbles / stones, oil paint in all colour, plastic paint in all colour, distemper in all colour (20 liter), burn oil (jala hua engine oil), brush 5 inch (jyoti, swastik,wheel or equivalent), brush 6 inch (jyoti, swastik,wheel or equivalent), painter patta, tarpin oil, thiner (1 liter pack), bucket iron minimum weight 1 to 1.5 kg. (tata, jindal or equivalent ), bucket plastic minimum weight 1.5 kg., lock 75 mm 4 key (isi mark), lock 90 mm 4 key (isi mark), brush cutting machine engine (sharpex, honda, stihl or equivalent), brush cutting machine body (sharpex, honda, stihl or equivalent), brush cutting machine motor binding work complete, brush cutter machine hub (sharpex, honda, stihl or equivalent), brush cutter machine lattu (sharpex, honda, stihl or equivalent), brush cutter machine patta (sharpex, honda, stihl or equivalent), brush cutter machine gear (sharpex, honda, stihl or equivalent), brush cutter machine air filter (sharpex, honda, stihl or equivalent), brush cutter machine condenser (sharpex, honda, stihl or equivalent), brush cutter machine carborator (sharpex, honda, stihl or equivalent), brush cutter machine startar (sharpex, honda, stihl or equivalent), brush cutter machine switch (sharpex, honda, stihl or equivalent), brush cutter machine clutch (sharpex, honda, stihl or equivalent), brush cutter machine handle (sharpex, honda, stihl or equivalent), brush cutter machine excelerator (sharpex, honda, stihl or equivalent), brush cutter machine plug (sharpex,honda,sthil or equivalent), brush cutter machine bearing (sharpex,honda,sthil or equivalent), brush cutter machine block pisten set (sharpex,honda,sthil or equivalent), brush cutter road minimum 8 mm thickness 9 teeth (sharpex,honda,sthil or equivalent), brush cutter machine wire (squre shap)minumum length 50 meter / bundle (sharpex, honda, stihl or equivalent), lawn mover machine engine (sharpex, honda, stihl or equivale

CTN :45056640

29 May, 2026 NA

Howrah - West Bengal

Tender For supply of form no. g-9/gl-23. letter delivery book. book of 100 leaves 1)unit- number of books, 2)size-152x215mm,plus/minus 5mm, 3)printing paper- white map litho 60 gsm, i.s no. 1848/part(1)2018. 4) printing- both side in black ink , printing matter to be collected from consignee, 5)binding- centre two stitching by 20 gauge wire with brown kraft paper cover of 110gsm of i.s no 1397/90 grade-ii (mg), 6)sample:- one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7) packing: each pack will contain twenty plus twenty total forty books. each twenty books packing must be wrapped in more than 50 micron transparent poly propylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no., form no. & serial no. if any. special condition:-quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ]

CTN :45066695

28 May, 2026 NA

Howrah - West Bengal

Tender For corrigendum : supply of form no. op/t-100. number taker book. books of 100 leaves. 1)unit- number of books, 2)size:215x305mm,plus/minus 5mm,3) printing paper: white map litho 60 gsm, i.s. no. 1848/part(1)2018 ,4) printing-both side in black ink, printing matter to be collected from consignee, 5) binding- centre three stitching by 20 gauge wire with brown kraft paper cover of 110 gsm of i.s no 1397/90grade-ii(mg), 6) sample- one sample for printing, binding and finishing to be got approved from consignee before bulk printing ,7) packing: each pack will contain ten plus ten total twenty books. each ten books packing must be wrapped in more than 50 micron transparent polypropylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l. no., form no. & serial no. if any. special condition:- quantity is in number of books and material to be supplied in book. [ warranty period: 30 months after the date of delivery ] ]

CTN :45077655

03 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of form no. com-2(bk)/com-d-16. return of demurrage and storage charges incurred on parcels luggage carriages & animals. book of 50 leaves .1)unit- number of books, 2)size-215x200 mm, plus/minus 5mm, 3)printing paper- white map litho 60 gsm, i.s no. 1848/part(1)2018. 4)printing-both side in black ink , printing matter to be collected from consignee, 5)binding- side two stitching by 20 gauge wire with brown kraft paper cover of 110gsm of i.s no 1397/90 grade-ii (mg), 6)sample:- one sample for printing, binding and finishing to be got approved from consignee before bulk printing, 7) packing: each pack will contain ten plus ten total twenty books. each ten books must be wrapped in more than 50 micron transparent poly propylene foil or bag as suitable as approved by govt. and packed in suitable size of five ply corrugated cartoon box with proper label (printing size 48pt.) of p.l.no., form no. & serial no. if any. special condition:-quantity is in number of books and material to be supplied inbook. [ warranty period: 30 months after the date of delivery ]

Plastic Clip Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government / Public Sector