Latest plastic clip Tenders | Government plastic clip Tenders

Central Government/Public Sector

CTN :43591399

13 Feb, 2026 NA

Kapurthala - Punjab

Tender For set of roof elements for lhb coaches., as per drawing: mprooflhb, packing instruction: 1. the supplier shall pack the final roof element in a suitably designed returnable fixture in such a way that final roof element shall not get scratched, damaged, twisted during transportation, storage and lifting and to avoid scratches on outer surface. it should be wrapped with enviroment friendly material and it should have standard clamping /fastening mechanism so that it can be opened easily. it should have firm's identification mark. 2. first returanable fixture along with final roof element beretained by rcf & this fixture shall be exchanged in the second lot supply and so on. atthe end of the contact, the firm shall collect the remaining returnable packing fixture from rcf. 3. the packing fixture/frame to be fabricated having sufficient strenght to bear approximate 1 tonne load in static & moving condition of five coach set of final roof element. 4. the fixture /frame/pallet should be designed so that the packed final roof element preferably remain in horizontal position to minimize surface area. 5. it should also be suitable for storage of final roof element under open sky., proction procedure: n.a, quality plan: n.a [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43591571

20 Jan, 2026 NA

Kapurthala - Punjab

Tender For set of carline assly. for lhb power car note: crf items are to be manufactured as per dy. cple-iii letter no. mpsh/510003/lhb dated 04/04/2024, as per drawing: mp09lpcar version 5, packing instruction: carline assly the supplier shall pack the three c/set (segments) of carlines in a suitably designed robust returnable metallic cage/structure insuch a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure tobe fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline. the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodate fork lifter arms for lifting and transportation. it should have standardclamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remainingreturnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packing slip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43591575

20 Jan, 2026 NA

Kapurthala - Punjab

Tender For set of carline for amrit bharat scn coach, as per drawing: mp24calabscn version 2, packing instruction: carline assly the supplier shall pack the three c/set (segments)of carlines in a suitably designed robust returnable metallic cage/structure in such a way that carlines shall not get entangle, damaged, twisted, dented during transportation, storage, handling and lifting and to avoid scratches on outer surface suitable environment friendly cushioning material is to be placed between two segments, transit damage if any shall be at the cost of supplier. the packing cage/structure to be fabricated by using sq. tubes channels/angles having sufficient strength to bear approximate 1.5 tonne material load in static & moving condition of three coach set of carline.the bottom part of this packing cage/pallet should be such that curvature profile of bottom carline should match with the profile of packing cage and it can accommodatefork lifter arms for lifting and transportation. it should have standard clamping/fastening mechanism to facilitate easy unpacking & unloading. it should have firm's identification/color mark. the packing cages along with set of carlines supplied in one lot be retained by rcf & this cage set shall be exchanged in the second lot supply and so on. at the end of the contract, the firm shall collect the remaining returnable packing cages from rcf. it should also be suitable for storage of carline under open sky. packingslip should be pasted on each cage showing p.o. no., pl no., description,drg. no./spec, , qty. , firm's name and address & despatch date etc. for identification. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :43588890

10 Feb, 2026 NA

Salem - Tamil Nadu

Tender For sa division: construction of ballast less track with indigenous fastening system on loop line at ptj (rd-5)

Central Government / Public Sector

CTN :43593487

09 Feb, 2026 NA

Multi City - Multi State

Tender For manufacture and supply of 1 in 12 r412 canted turnout 60e1/60e1a1 or 60e1a4 grade 880 or r260 fabricated slide chairs with rollers, back drive (secondary drives), fabricated special plates, sgci check rail support assemblies, 33c1 r260 check rail, all fastening assemblies from srj to boc, rail 60e1 grade 880 or r260 for the lead & intermediate portion, weldable cms with 60e1 grade 880 or r260 rails as per the design, psc sleepers. warranty period: 30 months from the date of supply [ warranty period: 30 months after the date of delivery ]

CTN :42352849

17 Jan, 2026 NA

Raigad - Maharashtra

Tender For bid to ras supply of special tools for barak missile d d - ebm safety plug , shorting connector , explosive bolt short circuit connector , short circuit connector , short circuit connector s and a , igniter shorting connector , igniter fuze plug , wing pin removal tool , cover opening jig , tvs explosive bolt wrench , punch pin , nozzle assembly jig , sleeve , tvs jet vanes caliber device , belleville spring wrench warhead fastening ring tool , steering fin setting jig , c-pin removal jig , spacer , folding wings fin jig , motor case pump , front joint fox jig fwd ring placement adaptor , umb connector holder tens. dev. assy. , lock pin release tool , front safety jig tool , relief valve release tool , fin shaft arming handle , wing shaft arming handle , extended wrench handle , umbil conn posit key pin face spanner , servo assembly jig , holding pin , s and a opening jig , s and a assembly device , warhead removal device , sliding hammer , handle , rocket motor exhaust nozzle dummy , missile clamp key , s and a securing pin , missile holding clamp

CTN :43581927

26 Jan, 2026 NA

Pune - Maharashtra

Tender For supply of pilot pen , eraser , sharpener , correction pen , white tape , pencil , sketch pen , stapler pin , marker black colour , glue stick , plastic scale 15 cm , drawing push pin , stick pad , plastic clip board , stapler , steel scale 30 cm , instrument box , unruled register , ruled register , rollerball pen , plastic scale 30 cm , plain copier paper

CTN :43588641

30 Jan, 2026 NA

Multi City - Multi State

Tender For supply of 1-12 canted turnout r555 60kg gr-1080 rh (including switch, lead & crossing assembly, check rail and rails for welded leg) as per specification no. edfc-1 annexure-b and master drawing no. edfcc4743-04 including all fitting & fastening, backdrive but excluding psc sleeper, signaling equipment. [ warranty period: 30 months after the date of delivery ]

CTN :43592535

28 Jan, 2026 NA

Kolkata - West Bengal

Tender For supply of 1/2 inch sq. drive cordless impact wrench, having brushless motor and iq power control system with 4 modes : hand tight , wrench tight, mid power, full power as per annexure "a" attached .make: ingersoll rand/ridgid / milwaukee / aeg or equivalent. offered make- model description-brushless motor voltage:20v square drive:1/2"no-load speed: 0-1600/0-2100/0-2400 rpm impact rate: 0-1500/0-1800/0-2200 bpm fastening torque:850nm nut-busting torque:1000 nm integrated led work light include:3 pcs deep sockets (22,24,27mm)1 pcs belt clip 2 pcs 4.0ah battery pack (fbli2002) 1 pcs charger (fcli2001e) charge volts:220-240v 50/60hz packed by carrying case [ warranty period: 30 months after the date of delivery ]

CTN :43521420

24 Jan, 2026 NA

Delhi - Delhi

Tender For supply of facial biometric access system d d - face biometric controller with power supply exit switch em door , cctv camera 2mpx , ptz camera , fiber liu , access controller pc with software , network rack 9u with pdu , ups 1 kva with inbuilt battery high , network switch with fiber port , cat 6 cable , optical fiber 6 core , electrical cable 2 core , hdpe pipe , pvc conduit pipe and fastining , intalling charges , nvr 64 channel 8 sata , 16tb hard disk , ups with inbuit battery , display 55 inch , poe switch 8 port , network rack 9u with fastening , pvc conduit pipe and fastening , installatinon charges

Plastic Clip Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector