Latest plastic cupboard Tenders | Government plastic cupboard Tenders

State Government

CTN :45198824

28 May, 2026 NA

Sundernagar - Himachal Pradesh

Tender For corrigendum : supply of revolving chair (v5) (q2) , executive table (v4) (q2) , computer table (v3) (q2) , modular table / meeting table / centre table (v2) (q2) , metal storage cabinet (q2)

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

State Government

CTN :45198400

29 May, 2026 1.88 Crore

Ahmedabad - Gujarat

Tender For corrigendum : supply of wooden shelf / case / rack / credenza / modular storage (v2) (q2) , wooden display cabinet with glass doors (q2)

CTN :45301175

02 Jun, 2026 NA

Palamau - Jharkhand

Tender For supply of machine equipments furniture items in nagar panchayat chhattarpur - executive table made of pre-laminated board (minimum 25 mm top, 18 mm sides), size approx. 7 ft 3 ft or larger, with side storage unit (l-type), drawers with lock, modesty panel, edge banded, termite resistant., ergonomic design, cushioned seat (minimum 40 50 mm foam), hydraulic height adjustment (for revolving chairs), strong base with castor wheels, load capacity 100 kg., visitor chair with cushioned seat and back, strong metal/steel frame with powder-coated finish, ergonomic design, and load capacity 100 kg, suitable for office use.seat size approx. 18 20 inch width with proper back support, non-slip legs or base, durable upholstery (fabric/leatherette), with minimum 1-year warranty, engineered wood cabinet, minimum 4 5 shelves, lockable, size approx. 6 ft height 3 ft width, powder-coated/laminated finish., office backdrop panel made of acp with high-quality printed vinyl or uv print finish, mounted on wall with proper framework, suitable for office branding/display.size as per site requirement, with smooth finish, durable material, and provision for logo/text display.(led backlit option preferred, with concealed wiring), designation board made of acrylic sheet (minimum 5 mm thickness) with uv printed or vinyl lettering, mounted on office backdrop with spacers for raised effect.size approx. 18 inch 6 inch (1.5 ft 0.5 ft) or as per designation length, with smooth finish, durable printing, and proper alignment on backdrop., photo frame made of wooden frame with glass/acrylic front, high-resolution printed photograph, wall-mounted with proper hooks.size approx. 12 inch 18 inch, with durable finish and neat border suitable for office display., indoor ornamental plant in decorative pot, suitable for office environment, low maintenance, air-purifying variety (e.g., money plant, snake plant, or similar), with pot size approx. 6 8 inch diameter, placed on desk/table., office pen stand made of metal material, multi-compartment design, durable and suitable for desk use, with neat finish and standard size., intel core i5 (latest generation 13th or above), 8 gb ram, 512gb ssd (expandable), full hd (21.5 or above) led monitor, keyboard & mouse, pre-installed windows 11 pro and ms office 2021 / microsoft 365 (original licensed), suitable for heavy office/multitasking work, with minimum 3-year onsite warranty (preferred brands: hp, dell, lenovo), color ink tank multifunction printer with print, scan and copy functions, automatic duplex printing, minimum print speed 20 ipm (black) and 10 ipm (color), print resolution 600 1200 dpi, suitable for high-volume office use.should have adf (minimum 30 sheets), support a4/legal sizes, wi-fi, lan and usb connectivity, refillable ink tank system with low running cost, supplied with full ink set, installation, and minimum 1-year onsite warranty. (preferred brands: canon, brother, epson, hp), line-interactive ups with minimum 600 1 kva capacity, pure sine wave output, backup time minimum 15 20 minutes for one desktop system, with overload/short circuit protection and audible alarm.should include built-in battery, led indicators, and support for automatic voltage regulation (avr), with minimum 1-year warranty., height adjustable table-top desk with manual/gas spring lift, sturdy frame, suitable for sit-stand office use, modular workstation units made of pre-laminated engineered wood (minimum 18 mm thickness) with edge banding, sturdy metal frame, and cable management provision, suitable for regular office use.each workstation shall have minimum working size approx. 3.5 4 ft width 2 2.5 ft depth per user, with partition panels, smooth finish, complete fitting/fixing, installation, and commissioning., ergonomic office chair with cushioned seat and back (minimum 40 50 mm foam), mid-back design, breathable fabric/mesh upholstery, and strong metal frame with load capacity 100 kg.should have fixed armrests, stable base without w

State Government

CTN :45291311

10 Jun, 2026 11.00 Lacs

Anand-Guj - Gujarat

Tender For supply of plywood 19mm bwr md table storage sides , plywood 12mm bwr wall panelling cabinet sides , plywood 8mm- shutters, drawer fronts , laminate sheet table top and cabin accent , veneer sheet md table top and front , concealed hinges hettich or ebco all shutters , drawer slides full extension ebco ball bearing , cabinet handles ss bar pull 160mm cc brushed chrome , tape all exposed ply edges , md l shape executive table fabrication labour , full height wall storage cabinet fabrication labour , decorative wall panelling fabrication labour , reception counter fabrication labour , solid wood flush door md cabin walnut veneer both sides , wooden pelmet or ceiling box over window blind concealment , carpenter labour skilled site fabrication and finishing , helper labour carpentry material handling and assist , 2.5 sqmm frls copper wire power points and ac circuits , 1.5 sqmm frls copper wire light and fan points , 4.0 sqmm frls copper wire ac dedicated circuit , 25mm isi pvc conduit pipe concealed wiring , 20mm isi pvc conduit pipe light circuits , modular switches 6a legrand or havells with ms box , modular 16a power sockets 5 pin with 6a switch , mcb distribution board 8-way double door surface mount , led recessed downlight 22w philips or havells warm white , earthing pipe gi 40mm with charcoal salt treatment , light point wiring and fixing labour concealed conduit per point , power socket point wiring labour 2.5sqmm per point , ac point wiring labour - dedicated 4sqmm circuit , db installation and testing labour mcb earthing load test , led light fixture installation fixing connection testing , 600x600mm vitrified wood carpet area , laying labour levelling grouting cleaning , pop work , wall putty all walls 2 coats asian paints or birla , wall primer asian paints primer plus 20l , premium acrylic emulsion walls , obd white distemper ceiling asian paints tractor emulsion 20l , paint tools and consumables brushes rollers masking plastic , pu or nc polish wooden furniture nc or pu polish 1l tin , wall putty labour 2 coats 1000 sqft walls , wall painting labour primer plus 2 coats emulsion , ceiling painting labour 2 coats 250 sqft , pu polish on furniture labour sanding primer 2 pu coats , biometric unit fingerprint rfid , 12v smps power supply em lock 2a dc adapter , exit push button ss flush mount n o contact with label , hydraulic door closer dorma or stanley en3 rated , biometric installation labour wiring programming testing , l shape fabric sofa cream or off white 3 plus 2 seater 36d foam hardwood frame , fabric sofa bed cream or off white 2 seater 36d foam hardwood frame , sofa installation and placement labour assembly positioning levelling , visitor chair white shell moulded polypropylene chrome legs , md executive high back chair leatherette lumbar tilt adjustable , reception desk chair mid back mesh or fabric chrome base , zebra day night roller blind all windows motorised or manual , aluminium track and brackets blind per running foot , blind installation labour brackets hanging adjusting

CTN :45297469

02 Jun, 2026 NA

Khorda - Odisha

Tender For supply of metal beds (v3) (q2) ( pac only ) , modular table / meeting table / centre table (v2) (q2) ( pac only ) , chair for general purpose (q2) ( pac only ) , steel almirah / cabinets (v4) (q2) ( pac only ) , sofa (v3) (q2) ( pac only ) , metal storage cabinet (q2) ( pac only ) , steel cloth lockers (v3) (q2) ( pac only ) , revolving chair (v5) (q2)

CTN :45177195

25 May, 2026 NA

Barmer - Rajasthan

Tender For corrigendum : supply of executive desk and su , executive desk and su 1.8 x 2.1 x 0.75 , executive desk and su 1.65x1.95x0.75 , executive desk 1.2x0.6x0.728 , cafateria table 6 seater 1.7x1.1x0.75 , conference table 4 seater 1.15x0.74 , centre table , reception table , examination table , backunit 2.35x0.5x0.75 , backunit 1.8x0.5x0.75 , wall mounted cabinet 0.76x0.38x0.9 , vertical file cabinet drawer 1.32x0.47x0.62 , display cabinet 1.8x0.9x0.45 , fire cabinet 4 drawer frfc 2 hours , vertical file cabinet 1.8x0.9x0.45 store well plain pg 100 , full back executive chair , meduim back executive chair , vurv mid back , oxbo visitor chair , dinning chair , personal locker 1.9x0.37x0.47 , visitor sofa , executive sofa 3 seater parto plus , executive sofa 1 seater parto plus , ss table stool , steel chair 3 seater , cell phone locker 60 aisle and back storage 1.8x0.9x0.22 , horizontal plan filing cabinet 1.3x0.96x0.85 , corner table edward 0.6x0.6x0.45 , reserve plus storage unit, lateral filing planter 4 pot , lh single person l shaped worstation 5 inch x 5 inch w x 2inch d schm 1 , rh single person l shaped worstation 5 inch x 5inchw x 2inchd schm 1 , mingle modular plt 25 seater mingle

CTN :45253107

29 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of steel almirah / cabinets (v4) (q2) , metal storage cabinet (q2) , revolving chair (v5) (q2) , chair for general purpose (q2) , modular work stations (v3) (q2) , desk and chair set for classroom/training area (q2)

Central Government/Public Sector

CTN :45260578

10 Jun, 2026 83.36 Lacs

Anuppur - Madhya Pradesh

Tender For supply of wooden shelf / case / rack / credenza / modular storage (v2) (q2) ( pac only ) , show case (q2) ( pac only ) , modular table / meeting table / centre table (v2) (q2) ( pac only ) , executive table (v4) (q2) ( pac only ) , composite office tables conforming to is 8126 (v2) (q2) ( pac only ) , revolving chair (v5) (q2) ( pac only ) , chair for general purpose (q2) ( pac only ) , waiting area / airport terminal / public place / reception area chair or seat (v2) (q2) ( pac only ) , counter seat (chair or stool) (v2) (q2) ( pac only ) , sofa (v3) (q2) ( pac only ) , mobile storage compactors (q3) ( pac only ) , godrej interio make, gain pro main body with wooden door cam lock , godrej interio make, opos wish recta 1200 x 600 with cpu trolley plus kbpt , godrej interio make, parto sofa 1str , godrej interio make, vsdu 5 wooden top , godrej interio make, horizontal plan filing cabinet

CTN :45262743

10 Jun, 2026 NA

West Garo Hills - Meghalaya

Tender For supply of executive table (v4) (q2) , revolving chair (v5) (q2) , chair for general purpose (q2) , computer table (v3) (q2) , small steel storage cabinet , steel almirah big , 3 in 1 laserjet printer , ups , all in one pc i7 , desktop computer i5 , inverter 2 kw , modular battery , ro water filter , electrical extension board

Plastic Cupboard Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government/Public Sector