Plastic Dome Tenders

Get complete information related to latest Plastic Dome Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Plastic Dome Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Plastic Dome Tenders .

Filter

Loading....

Get Tender in Email

Central Government/Public Sector

CTN :41704768

15 Sep, 2025 22.30 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of provision of lighting arrangement for the watch tower along with solar system at kushinagar airport : : - design and sitc of off grid solar system of 1 kwp capacity along with suitable capacity inverter and 2 nos. of 150 ah solar tubular battery along with necessary module mounting structure & civil works like foundation etc. as required at site for upssf watch tower in operational area of airport., supply of 4c x 6 sq. mm xlpe insulated & pvc sheathed, armored aluminium conductor cable of 1.1kv grade as per is 7098 (part i) 1988 with up to date amendments etc. complete as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle), laying of hdpe pipe upto size 50 mm complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required.upto 35 sq. mm, supplying and fixing of following way single pole and neutral, sheet steel, mcb distribution board 240 v, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way, double door, supplying and fixing 6 amps to 32 amps rating, single pole, 240 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive loads in the existing mcb db complete with connections, testing and commissioning etc. as required., supplying and fixing dp mcb 32 amps, double pole, rating, 240 volts, 10 ka, c curve, miniature circuit breaker in the existing mcb db complete with connections, testing and commissioning etc. as required., wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modulat switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper stranded conductor single core cable etc. as required.(group c), wiring for circuit/ sub-main wiring along with earth wire with 2x2.5 sq.mm+ 1x 2.5 sq.mm earth wire.sizes of frls pvc insulated copper conductor, single core stranded cable in surface/ recessed steel conduit as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required., supply of 20 watt led batten surface mounted suitable for operation on 230 volt,50hz ac supply, complete etc as required., supply of 400 mm, 2100 rpm wall mounting swinging fan suitable for single phase 230 volt, 50 hz ac supply complete with motor, capacitor, mounting clamps etc. with all accessories as required complete., installation, testing and commissioning of pre-wired led fitting luminaries etc. of all types (surface/recessed) & street lights complete with all accessories. directly on ceiling/ wall , including connection with 1.5 sq.mm frls pvc insulated, stranded, copper conductor single core cable with flexible conduits and coupler and earthing etc. as required., installation of wall mount fan in the existing opening including making good the damage, connections, testing and commissioning etc. as required.upto 450mm sweep., supply of led street light of minimum lumen output of 3600 lumen made up of pressure die cast aluminum housing with membrane filter and have ip66 optical as well as electrical compartment with wide operating voltage range of 230+/- 10 percentage complete with all accessories as required., providing & fixing 32/40 mm dia b class gi

Central Government/Public Sector

CTN :41605725

06 Sep, 2025 3.21 Lacs

Bhadrawati - Maharashtra

Tender For providing and fixing of open / green gym item in palasgaon village under kuchana housing complex of majri area. - earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil., supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete., providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:3:6 (1 cement : 3 coarse sand (zone-iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:1 :3 (1 cement:1 coarse sand (zone-iii) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources), providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of m - 30 grade made of c&d waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge., providing and fixing pommel horse size 2200 x 710 x 610 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing sky walker size 1700 x 710 x 1700 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and foot rest structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing single shoulder press size 1200 x 760 x 1670 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and seat structure made of m.s sheet laminated by frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing seating standing twister size 1820 x 610 x 1520 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. round plate of 6 to 8 mm thickness. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bearing / pole cap made of hdpe/frp material and twister plate structure made of m.s sheet / frp of 3 to 4 mm thickness and panit by powder coated ( 80 to 90 micron). all complete job as per the instruction of engineer in charge., providing and fixing outdoor traidmill size 1200 x 610 x 1220 mm with pipe shall be structure pipe made of gi pipe of 4 42od nd 32 od of 3 to 4 mm thickness, bottom support m.s. plate. the arm with structure made of 32 od gi pipe of 3 to 4 mm thickness, bearing ball bearing (skf) ,bea

Central Government/Public Sector

CTN :41624803

10 Sep, 2025 NA

Kannur - Kerala

Tender For tice for supply & installation of printing materials converge id card-student-950 , converge id card-teacher-100 , converge id card-staff-200 , converge id card volunteers-200 nos service providers-175 , handbands-student , handbands teachers , handbands-staff , handbands volunteers-250 nos , placard-cultural walk , placard-transport committee , placard-any other requirement? , food coupons-student-5 times (950) , food coupons-teachers 5. times (38 for 18 centres + 62 nift kannur faculty and staff) , food coupons staff-5 times (38 for 19 centres 162 for kannur staff) , food coupons volunteers-250 nos-5 times (nift kannur students) , physical invitation card with cover , rulebook , 10 nos with silver embossing for cover page only and 10 nos with normal printing as per specifcations , event schedule/brochure-teachers , velcome note teachers , 17. university ground-student entrance - extreme end gate-direction, with gi frame and with fabric material with installation and the material should be taken back by the supplier , 18. university ground-big converge branding with gl frame and with fabric material with installation and the material should be aken back by the supplier , 19. university main stage sunshade covering with fabric material , 20. university main stage - background fabric material with gi frame and with fabric material with installation and the material should be taken back by the supplier , 21. university main stage - hand railing cover centre skirting with foam board with instilation and the material should be taken back by the supplier , 22. university main stage - hand ralling cover side skirting with instilation and the material should be taken back by the supplier , 23. university main stage-adjacent bleachers-wall foam boards with instilation and the material should be taken back by the supplier , 4. university main ground - green grill mesh barricades-skirting with branding with installation and the material should be taken back by the supplier , 5. university main ground - selfie point - indivisual/small group. fabric material with gl frame with installation and the material should be taken back by the supplier , 26. university main ground-backdrop wall photobooth-big groups , abric material with gl frame with installation and the material should be taken back by the supplier , 27. unniversity main stage-stage panels , fabric material with gi frame with installation and the material should be taken back by the supplier , standees to be placed in various points in and around campus. fabric material with gl frame with installation and the material should be taken back by the supplier , foam board display , fabric material display along with gl frame with installation and the material should be taken back by the supplier , auditorium backdrop with fabric material along with installation , cuboid totem structures alongwith gi fabrication , 2 foam boards of 2x2 ft sizes , foram boards of 4x2 ft sizes , the same should be inserted in the structures , nift campus-selfie point - individual/small group , fabric material along with gl frame and with fabric material with mstallation and the material should be taken back by the supplier , nift campus-backdrop wall photobooth - big groups , fabric material along with gi frame and with fabric material with stallation and the material should be taken back by the supplier , 10. nift campus map print-vinyl print , along with installation , flags-tall pole- , 20 nos at kannur university ground on rental basis , flags , nift campus-20 nos , handheld flags-20 nos , kannur university-20 nos , vertical hanging banner-foyer structure top edge- , horizontal banner above the auditorium gate with converge branding print , fabric material with installation , wayfinders installations-foamboards along with installation

CTN :41587309

16 Sep, 2025 5.49 Crore

Gorakhpur - Uttar Pradesh

Tender For supply of supply and fixing of odop cfc plant and machinery for wooden furniture d d - air compressor stand machine , high speed beam saw with optimization software , single sided high seed auto edge bander pre , hydraulic cold press - 50ton and 2 cylinders , triple head multi boring 21x3 - 63 spindles , cnc router- working area 1300 mm x 2500 mm , panel saw 3200x410mm - 7.5hp motor , semi-auto curvilinear edge bander 0.5-2mm , dust collector 7.5hp double bag heavy duty , dust collector 5hp double bag heavy duty , dust collector 3hp double bag , 250 kva transformer level-02 , st pole 11 mtr. long , acsr weasel conductor , gi pipe , 11 kv pin insulator with pin , 11 kv pin insulator with fitting , v type 11 kv x arm , earthing complete , 11 kv 3x70 sqmm cable uppcl approved make , cable joining kit 3x70 sqmm uppcl approved make , 11 kv tpmo fixing with all material , stay complete , t-off channel , top channel , cu. z clamp , f-bracket , droper angle , clamp for top droper x-arm and t-off and cable support clamp , nut bolt of different size , erecion of double pole structure on st pole 11 mtr , laying of 3x70 sqmm xlpe cable with gi pipe , erection of single st pole 11 mtr , erection of earthing of pole with g.i. wire and rod , chemical earthing of 250 kva distrution transformer , making of 11 kv xlpe indoor kit and outdoor kits in taping of cable providing fixinging and crimping of proper size good quality lugs , painting of pole by double coating aluminum and red oxide paint , fabrication errection commissioning and testing of 250 kva , construction of t or f plinth of size 2x2x1.2 mtr , grill fencing of 11 or 0.4 kv , 500 cft-i and c - seasoning kiln steam heated , 500 cft-i and c - installation and commissiong charges , wk-610 20 hp 15hp 3hp 1 or 2h - auto double surface planer , wr-20 15hp 2hp - straight line rip saw , cc-06-08-hydraulic - hydraulic clamp carrier , an-030-5 mtr- auto glue spreader , hs-625ts - tilting spindle shaper 7.5hp , fsm-520at - four side moulder with five , yr-750 - sliding head router , yrt-115 - rectangular tenoner , yom-120 - oscillation mortiser , hcs-18-w or all optionspneumatic cross cut off saw , dt-1136 - automatic copy shaper , gs-6213-with frequency control - double face glue spreader , pr-52nda - spiral cutter head planer sander , cdt-3155a - cnc dovetail tenoner , servokon make 100 kva 250- 480 or 400v 3 phase digital micro , civil work for seasoning plant , genset 160 kva //bid details 2 / 46

Central Government And Public Sector

CTN :41553286

15 Sep, 2025 5.37 Lacs

Ahmedabad - Gujarat

Tender For supply of sitc 4 no 3tr ductable ac units at ngn naranpura ahmd : : - supply 3 tr non inverter ductable ac , itc 3 tr non inverter ductable ac , s fixing copper piping 0.75 inch , s fixing copper piping 0.625 inch , sl 4c 4 sq mm copper pvc insu cable , sl 3c 2.5 sq mm copper pvc insu cable , sl 25 mm dia heavy pvc drain pipe , pvdg ms structure incl cutting etc , coveringopen space by boards etc , pvdg 8way double door db tpnmcbdb , sf 5 to 32 a mcb , sf 4 pole 63 a isolator , sf blanking plate in db , p laying 8 swg gi earth wire , pf prefo cable tray 150mm w 50 mm depth 1.6 mm t

Loading, Please wait...

Plastic Dome Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector