Latest plastic elbow Tenders | Government plastic elbow Tenders

Central Government/Public Sector

CTN :45419104

18 Jun, 2026 NA

Barh - Bihar

Tender For corrigendum : supply of schedule no. 1 - 100273607 - 10 - m1634721702 - pipe, cs, fe410, bslt-l, flg, 6mm, 268.28mm , schedule no. 2 - 100275531 - 10 - m1774990698 - bend: cb-l, flg, is2062, 45d, r1350mm, 450mm , schedule no. 3 - 100275531 - 20 - m1774144512 - reducer, cb-l, conc, flg, ms, 510mm, 450x250mm , schedule no. 4 - 100275531 - 30 - m1774143512 - reducer, cb-l, conc, flg, ms, 510mm,

State Government

CTN :45543645

24 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of 03 inch pn butterfly valve , 04 inch pn 16 butterfly valve , teflon sheet , 80 mm nb c c sorf flanges , 80 mm c.s. erw short radius 90 degree bend , ms hexagonal full threaded nut bolts , 06 mm thick mild steel plain plate , rolled steel angles

Central Government/Public Sector

CTN :45469615

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of matl code - vz8360000005-2 inch cs couplings- full socket weld type , matl code - vz8360000007-1inch cs couplings-full socket weld type , matl code - vz8360000008-0.5 inch cs couplings -full socket weld type , matl code - vz8360000009-1inch cs l bend socket - 90 degree elbow , matl code - vz8360000010- 1inch cs straight pipe connector- 5inch length , matl code - vz8360000011-1inch cs straight pipe connector- 3inch length , matl code - vz8360000012- 0.5 inch cs straight pipe connector- 3inchlength , matl code - vz8360000013-0.75 inch cs straight pipe connector- 3inchlength , matl code - vz8360000014-cs flange for 2inch pipe utility lines , matl code - vz8360000015-1inch cs straight adapter , matl code - vz8360000016-0.75 inch cs straight adapter

State Government

CTN :45445001

24 Jun, 2026 60.00 Lacs

Jummu - Jammu And Kashmir

Tender For installation of electro-mechanical equipment at cps muthi for water supply to durga nagar. - h.c pumping units-2no-providing, installation, testing and commissioning of 50000 gph x 150 mtrs. head (02 no.s) horizontal centrifugal split casing pump with slow peed motor at cps muthi by way of excavation of earth work for laying of rcc foundation block. the job includes construction of foundation block for installation of 50000 gph x 150 mtrs. hend horizontal centrifugal pump set at cps muthi. by way of dismantling of old foundation blocks with the help of required tool and tackle and manual labour as per site requirement. disposing off the excavated material from the site to distance of at least 0.50 km with the help of manual labour and mechanical transport. job includes digging of pit of size 6x3.5x4and disposal of excavated material from the site of the work to the place of dumping. providing/lying of rcc foundation block of size 5x3.5x5(labove the ground level) in 1:2:3 cement concrete mix having requisite reinforcement with 12 mm dia. tor steel from center to center with proper spacing. fabrication and fitting of foundation bolts duly welded with cross members and threading at top with nut. foundation bolt shall be welded with tor steel and firmly grouted in the cement concrete mix, plastering and finishing from outside: fitting of base frame plate on the top of the block and leveling it both horizontally as well as vertically. strengthening of the base frame by providing and welding of m. s. channel cross members of required size and as per the size of frame for giving extra strength against vibration of the unit and on full load running conditions. complete job includes cost of material and labour charges for laying of the foundation block, plastering and finishing. placing horizontal centrifugal pumping unit on the base frame by using hydra crane, chain block, manual labour and other tools and tackles. leveling of the pump and motor properly on the base frame and coupling them by fitting of the m.s. coupling bolts with nuts rubber bushes and m.s. fasteners required for horizontal centrifugal pumping unit base connections with base frame job includes cost of material, carriage of machinery and allied materials to the site of work, loading/unloading and allied charges.suction line: fabrication of suction line by providing / fabrication of ms pipe of dia 150 mm. of length as per site requirement (09 mtr approx.) proper beveling of ms pipe for v-butt welding joints. the job includes providing and. fabrication of ms bends of 150 mm dia out of ms pipe 150 mm dia. providing/fabrication / fitting of ms flanges-4no wherever required and with the one flange compatible to be fitted the suction flange of both the pumps. job includes providing and fabrication of ms bends of 150 mm dia -04 no. the job also includes providing and fitting of sluice valves of 150 mm dia. (cs material)- 02no.(01 no.for each suction line of 02 pump sets) on suction lines. providing, fabrication and fitting of ms flanges at both end of sluice valve as per site requirement.delivery line: fabrication of delivery line by providing and fabrication of ms pipe 125 mm. upto manifold. proper beveling of ms pipes for v-butt welding joint. job includes fabrication/fitting of ms pipe 125 mm dia. upto manifold. job also involves making interconnection with manifold with the delivery flange of newly installed pumps. the job involves fabrication/fitting of ms bends as per site requirement no-02 out of 125 mm dia. ms pipe. fabrication of 04 no. ms flange of 125 mm dia. to match delivery flange of the pump and welding of flange with one end of the bend. makes interconnection of manifold with delivery pipe. job also includes providing/fitting of sluice valve (cs)-2no and reflux valve of 125mm-2no (cs material) on delivery side of each pumpset by the way of welding for on delivery line. all the welding work shall have to executed butt pre heated high pressure welding electrod

Central Government/Public Sector

CTN :45433419

19 Jun, 2026 NA

Sonbhadra - Uttar Pradesh

Tender For supply of item_10_m1618920498_100273330_schedule 1 _ pipe,cs,a106-b,smls,6.30mm,25mm , item_20_m1618027627_100273330_schedule 2 _ pipe,cs,a106-c,10.15 mm,40 nb , item_30_m1618033572_100273330_schedule 3 _ pipe,cs,a106-c,8.74mm,60.33mm,50mm , item_40_m1618037617_100273330_schedule 4 _ pipe,cs,a106-c,smls,9.74mm,65mm , item_50_m1718390606_100273330_schedule 5 _ elbow,bw,cs,a234-wpc,90deg,lr,25mm , item_60_m1713959449_100273330_schedule 6 _ bend,eq,bw,cs,a234-wpb,90deg,sch160,40mm , item_70_m1711994562_100273330_schedule 7 _ bend,bw,cs,a234-wpb,90deg,1.5d,smls,50mm , item_80_m1712990032_100273330_schedule 8 _ bend,eq,bw,cs,a234-wpa,90deg,sch160,65mm

CTN :45446753

22 Jun, 2026 57.77 Lacs

Bhiwani - Haryana

Tender For supply erection commissioning of electrical and mechanical equipment for dewatering of flood water from field area for village badesra outfall at rd 70600 l of jui feeder - estimate for supply, erection & commissioning of electrical & mechanical equipment for dewatering of flood water from field area for village badesra outfall at rd 70600-l of jui feeder in lift w/s (m) division, bhiwani - supply, erection & commissioning of 5 c/s axial flow water lubricated vertical pumps of 5 cs. discharge at 1440 rpm at static head of approx 8.0 mtr. with y body, including ms bend including flange welding, nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department, supply, erection & commissioning of fully automatic star delta starter suitable for 30 hp motor as per ip 54 with all allied item like mccb, contactor, rating 120 amp 90 amp, 50 amp, all type of protection relays (over voltage, under voltage, over corrent, singhle phasing preventor, delay siwtch ) correction capacitor, digital meter, bus bar, thimble etc suitable and all live parts should be covered as per site demand and compartment coated with epoxy coating as per approved technical specification of department. (including cable suitable for panel to motor).

CTN :45446757

22 Jun, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For estimate for supply, erection & commissioning of various electromechanical equipment like 5 no. 5 cs. vt pump, electric motors, starter panel and other allied material for flood protection works from the field area of village dang khurd & outfall at rd 65000-r of nigana feeder in lift w/s (m) division, bhiwani for the year 2026-27. - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

CTN :44895796

06 Jun, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras bid to ras supply of pipes and pipe fittings for mpv - pipecs 32 nbx 485mmthk sch80_21001 , flange carbon steel 32 nbblack_21001 , equal angle ms is 2062 gr a 5 40 40mm_21001 , angle ms is 2062 gr b 5 50 50 mm wi_21001 , equal angle ms is 2062 gr a 8 65 65mm_21001 , pipecs 15 nbx 277mmthk sch40_21001 , pipecs 32 nbx 356mmthk sch40_21001 , pipe carbon steel seamlessblack_21001 , pipecs 65 nbx 701mmthk sch80_21001 , pipecs 200 nbx 818mmthk sch40_21001 , pipecs 200 nbx 1270mmthk sch80_21001 , elbow cs seamless 2 inch nb sch 40_21001 , elbowcs90lr100nb_21001 , elbowcs90lr125nb_21001 , elbowcs90sr125nb_21001 , bend seamless steel 65 mm nb lr 90_21001 , elbow carbon steel seamless 8 inch sc_21001 , pipecs 32 nbx 485mmthk sch80_21002 , flange carbon steel 32 nbblack_21002 , equal angle ms is 2062 gr a 5 40 40mm_21002 , angle ms is 2062 gr b 5 50 50 mm wi_21002 , equal angle ms is 2062 gr a 8 65 65mm_21002 , pipecs 15 nbx 277mmthk sch40_21002 , pipecs 32 nbx 356mmthk sch40_21002 , pipe carbon steel seamlessblack_21002 , pipecs 65 nbx 701mmthk sch80_21002 , pipecs 200 nbx 818mmthk sch40_21002 , pipecs 200 nbx 1270mmthk sch80_21002 , elbow cs seamless 2 inch nb sch 40_21002 , elbowcs90lr100nb_21002 , elbowcs90lr125nb_21002 , elbowcs90sr125nb_21002 , bend seamless steel 65 mm nb lr 90_21002 , elbow carbon steel seamless 8 inch sc_21002 , pipecs 32 nbx 485mmthk sch80_21003 , flange carbon steel 32 nbblack_21003 , equal angle ms is 2062 gr a 5 40 40mm_21003 , angle ms is 2062 gr b 5 50 50 mm wi_21003 , equal angle ms is 2062 gr a 8 65 65mm_21003 , pipecs 15 nbx 277mmthk sch40_21003 , pipecs 32 nbx 356mmthk sch40_21003 , pipe carbon steel seamlessblack_21003 , pipecs 65 nbx 701mmthk sch80_21003 , pipecs 200 nbx 818mmthk sch40_21003 , pipecs 200 nbx 1270mmthk sch80_21003 , elbow cs seamless 2 inch nb sch 40_21003 , elbowcs90lr100nb_21003 , elbowcs90lr125nb_21003 , elbowcs90sr125nb_21003 , bend seamless steel 65 mm nb lr 90_21003 , elbow carbon steel seamless 8 inch sc_21003

Central Government / Public Sector

CTN :45380714

22 Jun, 2026 20.71 Lacs

Kollam - Kerala

Tender For supply of pneumatic and mechanical spares for indane bottling plant quilon -push in type straight connector 12 mm to 8 mm , quick exhaust with silencer 1 by 4 inch , exhaust air flow controller 1 by 4 inch , pu tube 4 mm 100m , pu tube 6 mm 100m , pu tube 8 mm 100m , pu tube 10 mm 100m , pu tube 12 mm 100m , limit switch long roller lever , knob 3 port valve pneumatic manual control valve one touch fitting 6mm to 6mm , 5 by 2 hand lever operated valve with detent with port size 1 by 8 inch , 5 by 3 hand lever operated valve with spring centered 1 by 4 inch exhausted , 5 by 2 hand lever operated valve with detent with port size 1 by 4 inch , 5 by 2 pneumatic pilot operated valve with port size 1 by 4 inch , 5 by 2 double pneumatic pilot operated valve port size 1 by 4 inch , 5 by 2 sov with coil 1 by 4 inch pneumax xmx5 , push button pneumatic relay mechanical valve 1 by 4 , or gate pneumatic port size 1 by 8 inch , and gate pneumatic with through hole mounting , valve for limit switch sv 3 m5 festo , pneumatic limit switch valve port g 1 by 4 inch with mounting for conveyor line , pneumatic delay timer valve festo vz3 pk3 , pneumatic timer , iso profile pneumatic cylinder 50dia x 80 mm , iso profile pneumatic cylinder 50dia x 100 mm , iso profile pneumatic cylinder 50dia x 160 mm , iso std. profile cylinder 50 dia x 300 mm , iso profile pneumatic cylinder 50dia x 320 mm, magnetic , iso profile pneumatic cylinder 50dia x400 mm , iso pneumatic cylinder 63dia x 50 mm , iso pneumatic cylinder 63dia x 75 mm , iso pneumatic cylinder 63dia x 100 mm , smc pneumatic cylinder cp96sdb40 300c , smc pneumatic cylinder cp96kdb40 400c , smc pneumatic cylinder cp96sdb50 50c magnetic , smc pneumatic cylinder cp96sdb50 300c 50x300 magnetic , smc pneumatic cylinder cp96sdb50 350c , smc pneumatic cylinder cp96sdb50 450c , smc pneumatic cylinder cp96sdb50 550c , smc pneumatic cylinder cd55b63 80m , norgren pneumatic cylinder pra 802050 m 450 , seal kit for 50mm dia pneumatic cylinder norgren part no pra 802050 m 450 , seal kit for 50mm dia pneumatic cylinder smc make , seal kit for 50mm dia pneumatic cylinder janatics make , seal kit for 63 mm dia pneumatic cylinder norgren make , seal kit for 63 mm dia pneumatic cylinder smc make , seal kit for 63 mm dia pneumatic cylinder janatics make , seal kit for 40mm dia pneumatic cylinder smc make , deadman switch janatics dp04sr61 , supply of pneumatic drag chain for conveyor with inner width 100 to 150 mm and inner height 30 to 50 mm , ucp 213 ntn bearing , ucp 212 ntn bearing , ucp 210 ntn bearing , bearing p212 , bearing p213 , nylon stopper roller with s.s bush fitti 80x40x28 , conveyor shaft with key dia 65mm length 850mm to 870mm key slot as per requirement material grade en8 9 as per ioc sample , head sprocket 14 teeth 65mm dia , tail sprocket 8 teeth , conveyor chain detachable type , chain pins , ms 2.5 mtr c channel for conveyor , twin arm stopper set with cylinder , stopper set arrow type right angle stopper , wt24-2x400 diffuse sensor sick , wl24x430 reflective sensor sick , wll24x430 optical sensor sick , sxe 9561 a86 00 solenoid valve with coil norgren , kosan loadcell flintec pc6 200kg , 40 mm bore ms idler shaft 500 mm , 40 mm bore ms idler shaft 400 mm , 40 mm bore ms idler shaft 380 mm , 40 mm bore ms idler shaft 350 mm , 40 mm bore ms idler shaft 300 mm , stud w nut is1363 cs m16x100mm , bolts allen head a193 gr b7 m6x30mm , m6 x 35 csk allen bolt and nut ht ms , bolt allen hd as is367 m8x30mm , m8 x 35 csk allen bolt and nut ht ms , bolt hexhd cs is 1367 m10x40mm , hex nut m10 is1367 //bid details 2 / 87 cl 4 , 12 mm x 40 mm nutwith double washer bolt , ss lock nut 6mm 40mm long nut and bolt , ss lock nut 8mm 40mm long nut and bolt , ms nut bolt for conveyor teflon , boom drive pinion , boom drive shaft , anchor bolt 10 x125 , anker bolt 12 x125 , anker bolt 16 x150 , dead weights pair , bend taper strip 90 deg cs conveyor inner 1550mm , bend taper strip 90 deg cs conveyor outer 1850mm

Central Government And Public Sector

CTN :45260579

06 Jun, 2026 NA

Kalpakkam - Tamil Nadu

Tender For corrigendum : supply of item no - 1 - part no - ss-10m0-6 stainless steel swagelok tube fitting union, 10mm tube od , item no - 2 - part no - ss-6m0-6 stainless steel swagelok tube fitting union 6mm tube od , item no - 3 - part no - ss-6m0-c 316 stainless steel cap for 6mm od tubing , item no - 4 - part no - ss- 10m0-c 316 stainless steel cap for 10mm od tubing , item no - 5 - part no - ss-6m0-p 316 stainless steel plug for 6mm swagelok tubing fitting. , item no - 6 - part no - ss-10m0-p 316 stainless steel plug for 10mm swagelok tube fitting , item no - 7 - part no - ss-6m0-6bt ss union bored through 6mm od , item no - 8 - part no - ss-10m0-6bt stainless steel swagelok tube fitting union 10mm tube od bored through. , item no - 9 - part no - mh-htb-6m hand tube bender , 6mm tube od 15mm bend radius , item no - 10 - part no - ms-htb-10m hand tube bender, 10mm tube od 24mm bend radius , item no - 11 -part no -ms-tc-308 tube cutter for stainless steel, soft copper, and aluminium tubing from 3 by 16 inch to 1 inch od and 6 to 25mm outside diameter, from 3 by 16 inch to 1 inch od , item no - 12 - part no - ms-tcw-308 tube cutter replacement cutting wheel , item no - 13 - part no - ms-tf-16-cs-06mm tf 16 series tube facing tool collet set - 6mm od , item no - 14 - part no - ms-tf 16-cs-10mm tf 16 series tube facing tool collet set - 10mm od , item no - 15 - part no - ms-tf-16-21-e tf16 series tube facing tool for sizes 1 by 8 inch to 1 inch - 3mm to 25mm - size with india power cord 230v 50 by 60hz and users manual , item no - 16 - part no - ms-tdt-24 tube deburring tool, 3 by 16 inch to 1.1 by 2 inch and 4 to 38mm od ) /bid number : gem/2026/b/7506821 * /dated: 20-05-2026 & & / bid document 1 / 19

Plastic Elbow Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector