Tender For supply of paint synthetic enamel brushing exterior finishing signal red, isc:537 to is:8662/2004 and icf specification, icf/md spec.-045 issue status-02 revision-03. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]
Tender For supply of paint full gloss polyurethane enamel(two pack)exterior finishing paint to rdso specfication no. m&c/pcn/100/2018 with amendment 1b(rev-2.0) chapter 5th colour pure white and icf new ulno.38770312105101 (10 ltr packing), note:- (1)material required in two equal ship ments within interval of 6 months or as required by consignee.(2) material must be supplied alo ng with govt /nabl approved lab test certificate as per above spec given. [ warranty period: 30 months after the date of delivery ]
Tender For construction of nrlm shed in tadasa gp - labour charges for handing errection of rcc rings etc t, transportation charges of materials beyond 5 km at 10% t, fabrication charges tadasa, cost of 6.5mm m.s. coil tadasa, rcc cap 1000 mm dia, 100 mm thick t, trap for tadasa, indian type water closet of size 580 mm of specified make with footrests t, add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material t, lead or pvc connection pipe 32mm dia (for wash basin) t, c.i. / m.s. brackets for flushing cistern t, brass stop cock t, cp brass waste 32 mm of standard pattern t, cp brass chain with plug t, copper plated brass piller tap 15mm t, white vitreous china clay flat back wash basin size 550x400mm t, handling loading and unloading 3% on material t, labour charges for lifting and placing in position and making connection at 7% on material t, polyenthylene water storage tank of specified capacity l t, pvc pipe of 10kgcum,110 mm t, pvc pipes t, pvc pipe of 4kgpercum,75 mm t, polythylene pipes high density 32mm external dia t, add 5% for fittings and wastage charges t, licenced plumber with tools t, add cement sand and grit 1% on material t, mathi/nandi wood planks for panels 25 mm thick t, hom of machinaries for planing t, add cutting and other wastage 5% t, honnewood planks for panels 20 mm thick tadasa, honne wood tadasa, unit cost as per the specification t, add brush at 1% on cost of paint t, enamel metal paint t, add handling , loading and unloading at 2% on material t, add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint t, ready mix primer paint (ready mix red lead paint) t, add hom of welding and grinding machine at4% on material t, welder grade i t, fitter claass t, ms flat t, m.s rods t, add hom of welding and grinding machine at2% on material t, fabricator t, five point five zero mm thick plain glass, chrominum plated screws t, cleat angles t, alluminium handles - 15 mm t, alluminium tower bolt - 20 cm t, pvc edge beading t, rubber beading for shutters beading t, nylon rollers t, aluminium window frame section 1.20 mm thick t, lime t, painter class i t, add brush, putty, sand paper, roller at 5% on cost of paint t, plasticemulsionpaint tadasa, vitrified tiles 600x600 mm t, white cement t, ceramic tiles 30 x 30 cms t, add sundries charges at 2 % on material t, add handling , loading and unloading at 1% on material t, casurina poles 100 - 150 mm t, mason class i (with tools) t, solid concrete blocks (40into20into20 cms)-5.00 n/sqmm t, add providing and removing scaffolding at 3% on labour t, formwork, centering & scaffolding for chejjas, canopy & other architectural projections of minor sections t, formwork, centering & scaffolding for columns & piers t, centering,scaffolding for beams t, formwork, centering & scaffolding for roof slab t, mixer (concrete small used in culvert) tadasa, boulders tadasa, bond stone 20 x 20 x 45 cm tadasa, size stone 20 x 20 x 25 cms tadasa, broken stone aggregate 40 mm size tadasa, add watering charges at 1 % on material tadasa, hom of vibrator 0.71 days tadasa, mixer (concrete) - 1 cum capacity tadasa, plasticizer / super plasticizer tadasa, portland cement tadasa, coarse sand (zone iii) tadasa, broken stone aggregate 12 mm to 10 mm size tadasa, broken stone aggregate 20 mm size tadasa, add watering charges at 1 % on labour tadasa, add sundries charges at 1 % on labour tadasa, over head & other miscellaneous charges tadasa, add sundries charges at 1 % on material tadasa, binding wire tadasa, tmt bars fe 500 tadasa
Tender For supply of the materials of at matturu village nrlm shed bulding work under mgnrega scheem - portland cement at matturu gp nrlm work site, tmt bars fe 500 at matturu gp nrlm work site, thick plain glass 5.50 mm at matturu gp nrlm work site, vitrified tiles 600x600 mm at matturu gp nrlm work site, ceramic tiles 30 x 30 cms at matturu gp nrlm work site, white cement at matturu gp nrlm work site, solid concrete blocks (40 20 20 cms)-5.00 n or sqmm at matturu gp nrlm work site, pvc pipe of 10kg or cum,110 mm at matturu gp nrlm work site, pvc pipe of 6kg or cum,63 mm at matturu gp nrlm work site, pvc pipe of 4kg or cum,75 mm at matturu gp nrlm work site, polythylene pipes high density 32mm external dia at matturu gp nrlm work site, pvc edge beading at matturu gp nrlm work site, rubber beading for shutters beading at matturu gp nrlm work site, casurina poles 100 - 150 mm at matturu gp nrlm work site, add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material at matturu gp nrlm work site, handling loading and unloading 3% on material at matturu gp nrlm work site, labour charges for lifting and placing in position and making connection at 7% on material at matturu gp nrlm work site, add 5% for fittings and wastage charges at matturu gp nrlm work site, add cement sand and grit 1% on material at matturu gp nrlm work site, add cutting and other wastage 5% at matturu gp nrlm work site, add brush at 1% on cost of paint at matturu gp nrlm work site, add handling , loading and unloading at 2% on material at matturu gp nrlm work site, add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint at matturu gp nrlm work site, add hom of welding and grinding machine at 4% on material at matturu gp nrlm work site, add hom of welding and grinding machine at 2% on material at matturu gp nrlm work site, add brush, putty, sand paper, roller at 5% on cost of paint at matturu gp nrlm work site, add handling , loading and unloading at 1% on material at matturu gp nrlm work site, add providing and removing scaffolding at 3% on labour at matturu gp nrlm work site, add watering charges at 1 % on material at matturu gp nrlm work site, name board at matturu gp nrlm work site, formwork, centering & scaffolding for chejjas, canopy & other architectural projections of minor sections at matturu gp nrlm work site, formwork, centering & scaffolding for columns & piers at matturu gp nrlm work site, formwork, centering & scaffolding for beams & lintels of building at matturu gp nrlm work site, formwork, centering & scaffolding for roof slab at matturu gp nrlm work site, polyenthylene water storage tank of specified capacity l at matturu gp nrlm work site, enamel metal paint at matturu gp nrlm work site, ready mix primer paint (ready mix red lead paint) at matturu gp nrlm work site, plasticemulsionpaint at matturu gp nrlm work site, plasticizer / super plasticizer at matturu gp nrlm work site, binding wire at matturu gp nrlm work site, ms flat at matturu gp nrlm work site, m.s rods at matturu gp nrlm work site, aluminium window frame section 1.20 mm thick at matturu gp nrlm work site, mixer (concrete small used in culvert) at matturu gp nrlm work site, s or p 100mm trap at matturu gp nrlm work site, indian type water closet of size 580 mm of specified make with footrests at matturu gp nrlm work site, lead or pvc connection pipe 32mm dia (for wash basin) at matturu gp nrlm work site, c.i. / m.s. brackets for flushing cistern at matturu gp nrlm work site, brass stop cock at matturu gp nrlm work site, cp brass waste 32 mm of standard pattern at matturu gp nrlm work site, cp brass chain with plug at matturu gp nrlm work site, copper plated brass piller tap 15mm at matturu gp nrlm work site, white vitreous china clay flat back wash basin size 550x400mm at matturu gp nrlm work site, unit cost as per the specification at matturu gp nrlm work site, chrominum plated screws at matturu gp nrlm work
Tender For bid to ras supply of paint green , paint intergard 251 red oxide , paint navy blue , paint golden yellow , paint fluorescent yellow , paint fluorescent red , paint fluorescent green , paint rfu finishing exterior synthetic dark grey , paint black enamel , paint azure blue , feather broom or phool jhadu , duster cloth , cloth sponge , cleaner white toilet or harpic , cloth stocknite or mutton cloth , broom country , paint terracotta red , paint silver , paint signal red , paint white enamel , lip seal for fire hydrant , heat resistant gloves for galley , hot melt gun glue kit , paint brush 1 by 2 13 mm , paint brush 1 inch , petroleum jelly , oil and grease remover , fevicol , lint free cloth , hacksaw blade 12
Tender For supply of full gloss polyurethane enamel (two pack) exterior finishing paint to specn rdso m&c/pcn/100/2018 chapter-v to shade no ral ds 240-60-35 ( compatible with other system paints) [ warranty period: 12 months after the date of delivery ]
Tender For supply of paint enamel synthetic exterior finishing to is: 8662 (reaffirmed 2019), colour shade - phirozi to isc no. 176 of is 5:2007 with additional requirement of icf/md/spec-045, issue status 02, r ev.03 with amendment dt.22-04-2008. the pigment content shall be 6% minimum (by mass) as per r dso letter no.m&c/pcn/i/64/i/ vol.ii, dt: 12.05.2016 as rdso amdt. no.1.packing condition : packi ng in 20ltrs. new non-returnable m.s. drums to is:2552/89 with amendment no.1, grade b2 [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]
Tender For supply of paint enamel synthetic exterior finishing white to is:8662/2004 (2nd revn.) along with a dditional requirements as laid down in icf str no. icf/md/spec.045 issue status 02 revn.03.shelf life 12 months. [ warranty period: 30 months after the date of delivery ]