Latest plastic keychain Tenders | Government plastic keychain Tenders

Central Government / Public Sector

CTN :45545893

07 Jul, 2026 NA

Kazipet - Telangana

Tender For rubber tube (sleeve) for sensor cables, size: id-42mm, od-47mm x 2.5mm thickness, shore hardness -75+/- 5. material: nitrile rubber. for wag-9 loco. note: 1.the item should be packed in such a way that there should not be direct sunlight on the item. 2. rubber components should be supplied away fromcontact with materials such as copper & manganese. 3. under no circumstances rubber components will bestressed during supply. 4. french chalk, soapstone or mica should be liberally applied on the surface of rubber components in sealed polyethylene bags. 5.one metre as sample to be got approved before effecting bulk supply. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45555978

19 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of exterior stickers for ac 3t amrit bharat coaches., as per drawing: lwaccn/pp2-8-3-002 alt annual repair w/o item 3,16 & 23, follow material spec. to rdso specification no. rdso/2006/cg-13 rev-01 option b (ref. md46271 dated 01.04.2025), packing instruction: exterior sticker/ marking diagram outside set of sidewall stickers should be rolled firmly on a cardboard tube/pipe of aprox. 03 inches diameter of sufficient strength and length more than sticker 2-3 inches of maximum width of sticker . endwall stickers of same set should also be rolled on seperate another cardboard tube/pipe (having similar dimensionaland strength parameter ) in same way. both tubes of one set should be packed together in a bio degradable transparent polyethylene packing. stickers or any edge ofsticker should not be found folded in packing. vinyl film side of stickers should be on the outside of tubes.these individual sets annual repaire further to be packed in card box (containing bulk quantity of sets). a list should be pasted on each set of transparent polyethylene packing and also on card box (containing bulk quantity of sets) showing pl no., item description, po no., name and address of supplier, date of manufacturing, lot number, lot quantity, list of items in a set etc. [ warranty period: 12 months after the date of delivery ] ]

CTN :45567354

24 Jun, 2026 NA

Asansol - West Bengal

Tender For supply of polyethylene glycol 0.4% + propylene glycol 0.3% + levocarnitine + soc eye drop [ item code m160606 ] as per specn. item code m160606 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45546840

07 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of silica gel orange, spherical beads without cobalt of size 3 to 5 mm. thematerial shall be packed in clean, dry & sealed polyethylene bags of 2.2 kg pack [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45516265

02 Jul, 2026 NA

Madurai - Tamil Nadu

Tender For rate contract for supply of various housekeeping item for aiims madurai - electrical items :, toilet cleaner liquid 500 ml, packing: plastic bottle (ex. harpic, vim) for toilet cleaning, toilet cleaner liquid 500 ml, packing: plastic bottle (ex. harpic, vim) (difference from item no.1) for toilet floor leaning, laundry soap type 2 (built soaps) grade 1, fragrance - lemon, weight of bar/cake (gms)- 250(ex: vim, rim.), dishwashing liquid type - liquid, weight - 0.75 l, packaging type - plastics (ex: vim, pril.), garbage bag extra large, type roll (15 per roll), garbage bag small, type roll (15 per roll), bathing soap 125 gm, (ex. dettol, medimix), glass cleaner liquid packing type-plastic, packing size (ml) 500, spray, urinal cubes material of urinal cube: naphthalene, num of cube per box (nos): 6, packaging type: pouches, phenolic disinfectant fluid net volume: 1 liter, high density polyethylene bucket lid-without, handle material-hdpe, 16 l capacity, single use rubber examination gloves sterility-non-sterile, material - natural rubber latex, powder- powdered, size of gloves - 8.5 (large), pack type- box of 100 non-sterile gloves, soft bristle (grass) broom type of broom soft bristle (grass) broom, material of handle/plug no handle/plug, overall length of the broom (in cm) 50 cm to 80 cm, hand wash type: pump type, pack size: 200ml, antiseptic liquid pack size: 500 ml (dettol), soap oil pack size: 1 ltrs, bleaching powder packing size1 kg, white naphthalene balls material of urinal cube water-soluble surfactants, number of cube per box (nos)100, packaging type: pouches, detergent powder quantity per pack (gms): 500, plastic bin drum with lid material: plastic, capacity:100 ltr, toilet brush for cleaning product type: manual toilet brush, bristle /filling material type: hard end, floor cleaner (lizol) container material: plastic, quantity per pack (ml): 500, straw (coconut) broom type of broom traditional straw (coconut) broom, material of handle/plug: no handle/plug, overall length of the broom (in cm):50 cm to 80 cm, wiper/mopper base aluminum handle handle material: aluminum, plastic bristle scrubbing brush overall width of brush (mm)25, length of bristle (mm):25, surgical face mask class of surgical face mask class 1, mopper 201-300 base steel handle handle material: steel, minimum length of handle (mm):301-400, bathroom mug material colored pp, capacity (ml):1001-1250, air freshener quantity: 220 ml, air freshener solid/block packing size (grams):50, cobweb stick shape of brush: half circle, length of the stick (full open) (mm)1250, polyester scrub sponge pad thickness (inches)0.4, steel scrub pad steel wool for dish wash, fixed handle platform brush type of handle fixed, material of handle metal, hdpe bucket capacity per bucket (liters): 5 tolerance: - 10 %, cloth duster material: microfiber cloth, size (length x breadth):16 x 24, cloth duster size (length x breadth) (inch* inch)14 x 14, floor mat easy maintenance and easy application, standard - rectangle - size - 15 x 23 inches (38 x 58 cm), ml6 contractor 230v ac (2no+2nc) or equilant

Central Government/Public Sector

CTN :45392261

11 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For supply of revision tkr set with semi constrained poly detailed specification as per technical documents - revision tkr set with semi constrained polyethylene liner 1.set of require size revision femur component with required augments, 2.revision tibia component with required augments, 3.insert rod (both femur and tibia rod) and 4.semiconstrained polyethylene liner with 40 gms antibiotic cements two in quantity 5.should be made up of cobalt cromium or titanium. additional terms and conditions - 1. should supply all implants and instrumentation at the time of surgery along with technical assistance. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45392614

11 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of ltug xlpe (cross linked polyethylene insulated cable 4 core copper conductor of size 185 sq.mm pvc outer sheathed armoured with galvanized steel strip/wire stranded and shaped conductor suitable for rated voltage at 1100 volts grade and conforming to is:7098 part 1 with amendment number 1to 5 reaffirmed 2005 or its latest version. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45406907

16 Jun, 2026 NA

Danapur - Bihar

Tender For polyethylene glycol 0.4% w/v and propylene glycol 0.3% w/v eye drops 10 ml[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] [ rate of supply 150 units per month , commencement time allowed -1 day ]

Central Government/Public Sector

CTN :45393443

22 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of exterior stickers for lhb scn coaches, as per drawing: ls83002 alt f w/o item 1,9 & 18, follow material spec. to rdso specification no. rdso/2006/cg-13 rev-01 option b (ref. md46271 dated 01.04.25), packing instruction: exterior sticker/ marking diagram outside set of sidewall stickers should be rolled firmly on a cardboard tube/pipe of aprox. 03 inches diameter of sufficient strength and length more than sticker 2-3 inches of maximum width of sticker . endwall stickers of same set should also be rolled onseperate another cardboard tube/pipe (having similar dimensional and strengthparameter ) in same way. both tubes of one set should be packed together in a bio degradable transparent polyethylene packing. stickers or any edge of sticker should not be found folded in packing. vinyl film side of stickers should be on the outside of tubes.these individual sets are further to be packed in card box (containing bulk quantity of sets). a list should be pasted on each set of transparent polyethylene packing and also on card box (containing bulk quantity of sets) showing pl no., item description, po no., name and address of supplier, date of manufacturing, lot number, lot quantity, list of items in a set etc. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45394867

03 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of exterior stickers for ac 3t amrit bharat coaches., as per drawing: lwaccn/pp2-8-3-002 alt ar w/o item 3,16 & 23, follow material spec. to rdso specification no. rdso/2006/cg-13 rev-01 option b (ref. md46271 dated 01.04.2025), packing instruction: exterior sticker/ marking diagram outside set of sidewall stickers should be rolled firmly on a cardboard tube/pipe of aprox. 03 inches diameter of sufficient strength and length more than sticker 2-3 inches of maximum width of sticker . endwall stickers of same set should also be rolled on seperate another cardboard tube/pipe (having similar dimensionaland strength parameter ) in same way. both tubes of one set should be packed together in a bio degradable transparent polyethylene packing. stickers or any edge ofsticker should not be found folded in packing. vinyl film side of stickers should be on the outside of tubes.these individual sets are further to be packed in card box (containing bulk quantity of sets). a list should be pasted on each set of transparent polyethylene packing and also on card box (containing bulk quantity of sets) showing pl no., item description, po no., name and address of supplier, date of manufacturing, lot number, lot quantity, list of items in a set etc. [ warranty period: 12 months after the date of delivery ] ]

Plastic Keychain Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors