Tender For repair replacement of internal wiring incl sub main wiring, mcb dbs, bldgs security lights and connected items in pocket 1 to 8 under ge roorkee - taking down old unserviceable point wiring of any description including all fittings and fixtures like switches, sockets, ceiling rose, fan regulator, tubelight,, mirror light,, ceiling light etc complete all as specified and directed., m&l for point wiring with 1.5 sqmm frls-h insulated, unsheathed, multistranded, 1100 volts grade copper conductor cable single core conforming to is:694 along with one run of 1.5 sqmm frls-h insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories / junction boxes / inspection covers etc of suitable size but not less than 20mm(od), concealed in wall/ floor etc including provision of earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass gi screws/ modular cover plate as required for mounting switches, sockets, fan regulator, etc. / modular metal flush box covered with modular frame plate with cover of any size as per site requirement for mounting modular switches, modular sockets, modular fan regulator etc complete all as specified and directed for one light / ceiling fan / exhaust fan / call bell point controlled by one switch, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., all as per item no 2 here-in-before but one wiring in existing conduit for one light / ceiling fan / exhaust fan / call bell point controlled by one switch., all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on independent board, all as per item no 2 here-in-before but one one 6a socket point controlled by one switch on same board, all as per item no 2 here-in-before but one one light point controlled by two no. two way switch complete all as specified and directed, all as per item no. 2 here-in-before but one 16a socket point controlled by one 16a switch on independent board with 2.5 sqmm wires., m&l for sub main wiring along with earth wire with frls-h insulated copper conductor, single core cable drawn through and including medium grade rigid pvc conduit conforming to is:9537 (pt-iii) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc including taking down existing unserviceable sub main wiring of any description complete all as specified and directed for 2runs x 4 sqmm(ph & n) + 1run x 4 sqmm(earth wire):- (note: three runs of copper cable and one run of pvc conduit shall be measured as one unit length), all as per item no 11 here-in-before but 2runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), all as per item no 11 here-in-before but 2runs x 10 sqmm(ph & n) + 1run x 10 sqmm(earth wire), all as per item no 11 here-in-before but 4runs x 6 sqmm(ph & n) + 1run x 6 sqmm(earth wire), notes for item no. 2.00 to 14.00(i) quoted rate shall deemed to include the cost of cutting chases on wall/floor for concealed conduit wiring and making good with cement plaster, putty and paint to match with the existing surface.(ii) if any beam / column / rock wall is encountered while cutting chases, that particular portion may be provided with pvc casing & capping or surface conduit for drawing cables and surface pvc gang box fully enclosed type for mounting switches, sockets & regulators etc to avoid any damage to the structure. (iii) no cutting shall be done on ceiling for laying pvc conduit for ceiling fan point wiring. surface conduit or pvc casing capping may be
Tender For special repair to dbs sub main wiring and miscellaneous items at mh and central institute at old amritsar cantt - taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed., material and labour for point wiring in existing conduit for following point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn through and existing pvc concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) complete all as specified and as directed. note : 1 switch, socket, regulator, bell, ceiling rose, regulator, lamp holder will be measured and paid separately.a) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board., c) for one three pin 5 amps socket outlet on the same board with other switch, d) for one light point controlled by two way switch, all a per item no 2 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper multi stranded conductor connecting to common earth dolly complete all as specified and directed., material and labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core frls pvc insulated unsheathed and multi stranded copper conductor cable 1100 volt ( isi marked ) drawn and including surface pvc conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core frls pvc insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including necessary cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc by using cement mortar (1:3) complete all as specified and as directed. note : 1. switche, socket, regulator, ceiling rose, bell, lamp holder will be measured and paid separatelya) for one light /fan/ buzzer point controlled by one 5 amp switch one way, b). for one three pin socket outlet 5 amps independent board, c) for one three pin 5 amps socket outlet on the same board with other switches, d) for one light point controlled by two way switch, all a per item no 7 here-in-above but with 2.5 sq mm size cable multi stranded frls copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continuous earth wire of pvc insulated 2.5 sq mm copper solid conductor connecting to common earth dolly complete all as sp
Tender For tender for supply of rubber goods - rubber taper plug size-98/102mm , neoprene material , rubber v seal ring nk-1100 b type continuous machine od-109mm id-89mm (biig size ) od-95mm id-83mm (small size) as per sample , rubber taper plug size-42/45mm , rubber o ring size-od-13mm id-10mm as per sample for a type centrifugal machine , rubber seat for double beat valve size235x30x12mm , rubber squeezer/scrapper for door mud/juice size-800x100x12mm , rubber seat for double beat valve size335x30x20mm , rubber strip for juice heater size3/4 inch x 3/4 inch x 1/2 inch , rubber bucket ring for telescopic valve , neoprene material , neoprene material , neoprene material , rubber buffer for hopper as per drg no asr/cp-15-r-1 , venjo rubber hose pipe 3/8 01 mtr , rubber hose pipe for mill size-bor-20mm od32mm , rubber hose pipe for mill size-bor-20mm od32mm , rubber hose pipe for vacuum filter size-2.25 inch bore x18 inch length , rubber mud seal size-35x35mm , mud scrapper belt (patta) for vacuum filter , rubber buffer for centrifugal machine as per sample , rubber sheet drg no asr/bh/pan/22/96 , bottom cylinder o ring , neoprene rubber sheet for main hole size- id440 od-525mm thickness -16mm , rubber bush , dholak type rubber bush , rubber tyre ph-272 , rubber tyre ph-250 , neoprene make rubber sheet for 700m2 vapour cell vapour outlet valve as per drg no asr/bh/29802 , neoprene make rubber sheet for semikeshner exhaust inlet valve as per drawing no 102/1993 , neoprene make rubber sheet for semikeshner 1100m2 vapour outlet valve as per drg no asr/bh/12/12/16 , neoprene make rubber sheet for 2000m2 vapour cell vapour outlet valve as per drg no asr/bh/8/2023 inlet valve , neoprene make rubber sheet for 2000m2 vapour cell exhaust inlet valve as per drg no asr/bh/9/2023 , neoprene make rubber sheet for 700m2 vapour cell exhaust inlet valve , rubber bush , neoprene make rubber sheet for 700m2 vapour cell vapour cell exhaust inlet valve id515 od-645 , neoprene make rubber sheet for old quad 1st body vapour inlet valve as per drg no asr/bh21003 , rubber hose pipe both end contactor 1/2 inch x 1 1/2mtr , rubber sheets for vapour inlet valve of 50 ton pan drg no asr/bh/70 , rubber sheets for vapour inlet valve of 60 ton pan as per drg no asr/bh/pan/12/09/022
Tender For corrigendum : repair and comprehensive maintenance of swimming pool plant and equipments fire fighting system at af stn nal under ge (af) nal - comprehensive annual maintenance of swimming pool comprises of the following equipments complete all as specified and directed.(a) pumping sets of capacity 3.5 hp - 05 nos (01 as standby) (b) pressure filter of filtering capacity 50 cum/hr - 04 nos (01 as standby)(c) dosing pump - 02 nos (one for chlorination and one for soda ash)(d) electrical panel board consisting of starters of suitable rating complete.note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit swimming pool once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of swimming pool.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account. (iii) cleaning all swimming pool building inside, plant room, equipments including surrounding area of the buildings. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of 3.5hp / 3.26 kw capacity and all other connected items., comprehensive annual maintenance of fire fighting system in sekhon hall , new tech flight, sre and new atc of the following equipments complete all as specified and directed.(a) main fire pump with centrifugal motor of existing capacity- 04 nos (b) jockey fire pump with electric motor of existing capacity - 04 nos (c) makeup fire pump- 04 nos(d) dg fire pump with engine - 04 nos note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit fire fighting installation in sekhon hall , new tech flight and new atc once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of installation.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account.(iii) cleaning all fire fighting installation buildings (sekhon hall , new tech flight and new atc) inside, plant room,equipments including surrounding area of the building. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of all existing capacity and all other connected items., s&f in repair pressure pump limit switch of capacity 1psi to 4 psi and 230 volt as per existing make and model fixed on pressure booster line complete all as specified and directed., supply, installation, testing and commissioning in repair of detectors complying with and type certified to en-45 addressable type multi sensor detector with heat and smoke combination with base with self built intelligence as per is:11360 (for annexes) complete all as specified and directed., supply, installation, testing and commissioning in repair of addressable manual call point / pill station resettable type with base complete all as specified and directed, supply, installation, testing and commissioning in repair of fire alarm sounder/siren electronic type horizontal single stage continuous type normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 mtr with sound output variation +5 db 500 mtr complete all as specified and directed, supply and fixing in repair addressable monitor module for activating the sirens complete all as specified and directed, taking out old unserviceable hose box by cutting and welding and s&f hose box made of 18 gauge ms sheet 800mmx 600 mm x 250 mm with double door with 4 mm thick glasses and door frame made of 16 gauge ms sheet for keeping 2 nos hose pipe of length 15 mtr each branch pipe nozzle coupling etc and painted fire red out side and brilliant white inside yard complete all as specified and dire
Tender For supply of tower bolts (non-ferrous metals) v2 as per is 204 (q2) , led luminaire for high bay lighting (q3) , curtain pipe, sider and mounting bracket (q4) , hydraulically regulated door closers conforming to is 3564 (q3) , wire mess gi 3 ft hieght 0 point 63 mm nominal dia of wire and avarage width of aperture 1 point 40 mm , holder for curtain , socket for curtain , pgi sheet 12m x 0 point 61 m , door handle 150 mm , snake guard door seals , lock for cupboard , wooden polish , paint brush size 1 inch , paint brush size 2 inch , paint brush size 4 inch , paint brush roller , enamel paint black , enamel paint white , enamel paint smoke gray , enamel paint og , turpentine oil , touch wood , shellac , malmal cloth for polish , yellow powder for polish , brown powder for polish , orange powder for polish , emery paper 120 grti , emery paper 80 grti , mcb dp dustubtion bord 4 way , wire mess gi 4 ft hieght 0 point 63 mm nominal dia of wire and avarage width of aperture 1 point 40 mm , cp knob for drewer 40 mm , gi connector 20 mm 15 mm , gi connector 25 mm 20 mm , joint solution solvent cement 50 ml , m s nails huf inch , s s nails huf inch , s s nails 1 inch , s s nails 1 and huf inch , s s nails 2 inch , paint brush size 3 inch , thinner , acrylic distemper , ss screws huf inch , ss screws 1 inch , ss screws 1 and huf inch , alluminium wire mesh 1 point 2 x 15mtr , bracket 19 mm , screw 19 x 6 , screw 32 x 8 , screw 25 x 8 , nail 17 x 1 , nail 19 x 1 by 4 , nail 14 x 1 , nail 14 x 2 , nail 14 x1 point 5 , butt hinges stainless steel 100mm , butt hinges stainless steel 75mm , continuous piano hinges stainless steel 8 fil length , continuous piano hinges stainless steel 6 fil length , t hinges ss , double acting spring hinges ss , 300mm long ordinary rat tail , mortice lock 4 levers 75 mm , mortice lock 4 levers100 mm , aluminium hooks and eyes 100mm , aluminium hooks and eyes 150mm , hasps and staples 100mm , magnetic latch for cupboard , door stopper , cotton waste , grease white , grease black , anchor fastner 16mm x 150mm , anchor fastner 8mm x 75mm , anchor fastner 10mm x 100mm , solar road stud , pvc portable speed bumps plastic , abs rectangular road stud , aluminium road stud , pvc portable speed bumps rubber , fire ball for fire safety , fevicol , gloves for polishing work , whire cement , chorophinicol anti termainte solvent , convex mirror 36 inch , convex mirror 24 inch , mild steel fixed delineator , polygrip sr 409 fast drying foam adhasive , french polish , astronomical timer for street light control 30 kw , pscs single phase atronomical 18 w //bid details 2 / 97
Tender For corrigendum : supply of continuous (piano) hinge type ii nom size 40, length 396, material-mild steel sheet / 5340016756 , continuous (piano) hinge type ii nom size 40, length 478, material-mild steel sheet / 5340016761
Tender For supply and installation of mechanical items for the tubewell at jogendra garden (wd-107) big-dia tubewell and other 19 nos. big dia tubewell under garfa big-dia t/w unit - chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 100, chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 150, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (i) 100 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (k) 150 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (h) 80 mm dia. (ii) medium quality, building works (f) structural steel works, grills, gates etc. b. repairing 2. welding in m.s. structural work withgas or electric: (b) continuous weld, building works. (u) - additional items : 20) supplying, fitting & fixing different factory made metal craft sheet (excluding cost of metal crafting) incluing cost of powder coating (for m.s, aluminium plate) & finished metal sheet with all fitting accessories complete in allrespect as per diection of engineer-in-charge. a)mild steel plate. i) 2.0mm thick, plumbing works (a)-(ii) g.i. pipe works and fittings 19(i) supplying, fitting and fixing pvc pipes of approved make of schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. tting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accesories, specials. payment for painting will be made seperately) (a) for exposed work pvc pipes (dia) (h)80 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (n) 300 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (l) 200 mm, resting ring : fabrication and supply of protection device (resting ring) made from m.s. iron of size:o.d.10", i.d. 7" thickness 3/4" duly cross supported by 1/2" x 1/2" x 10" m.s. square bars welded firmly at all the ends complete., erection clamp - 4" dia : fabrication & supply of 4" dia erection clamp made from 1/2" x 4?" x 27" m.s. iron flat with making of 4 nos. 5/9" dia bolt holes and supplying of 4 nos. 5/8" dia x 3" long m.s. full thread bolts with nuts and washers., sub total, gst 9 %, gst 9 %, cess 1%
Tender For tender for supply of flexible pure graphite ring and joining sheet - flexible pure graphite ring endless covered with top and bottom metallic rope cut ring bull ring in single oblique cut to withstand temp 650 deg c and pressure 300 kg per cm2 size 16 id 29.5 od 6.75 mm thickness one set consists of 6 rings , flexible pure graphite ring endless covered with top and bottom metallic rope cut ring bull ring in single oblique cut to withstand temp 650 deg c and pressure 300 kg per cm2 size 26 id 50 od 12 mm thickness one set consists of 6 rings , flexible pure graphite filament braided multiple inconel wire cut ring metallic wire braided to withstand temp 600 deg c and pressure 600 bar size od 41 id 25.5 8 mm thickness , flexible pure graphite cut ring size 41 58.5 9 mm , flexible pure graphite ring with oblique cut in 2 halves to withstand temp 600 deg c and pressure 300 kg per cm2 size 26 id 39 od 6.5 mm thickness , asbestos free metallic fibre jointing sheet size 2000 mm 1500 mm 3 mm for steam application to withstand continuous service temp 550 deg c and max operating pressure 170 kg per cm2 , asbestos free metallic fibre jointing sheet size 2000 mm 1500 mm 5 mm for steam application to withstand continuous service temp 550 deg c and max operating pressure 170 kg per cm2
Tender For supply of unified notice for fire prevention and safety to icf drg. no. icf/std-6-4-022. back ground colour- white, letter height and colourn as per drg. material spec. - base material - silver coated pet film, thickness-0.08 mm, adheshive to steel /lp sheet- 750 gm./2.5cm(min.), heat resistance-a) sticker should not have deterioration of adhesive on continuous exposure to atmosphere b) printing must have good resistance to the atmospheric condition. water resistance - sticker should not come out on washing with water solution. minimum life- one year in unused condition. three sample should be approved by the consignee before bulk supply. qty for pryj depot - 1200 nos. and cnb depot - 800 nos. [ warranty period: 30 months after the date of delivery ] ]