Latest plastic shredder Tenders | Government plastic shredder Tenders

Central Government/Public Sector

CTN :45547643

03 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : supply of 60-62 hp, 3 phase submersible pump energy efficient, 2860 to 3000 rpm, 03/04 stage, discharge: 2016 lpm (max.), head: 70-80 meter, rated current: 85.5 a (max.), efficiency: 58%, outlet: 125 mm, suitable for 6 inch dia 3 mtrs column pipe, with threaded ms flange should have tight in both threaded ends of column pipe, thickness of flange 1/2 inch each ms flange should have 8 nos 5/8 inch dia holes & suitable ms reducer or expander with the pump. make- ksb pumps ltd or similar [ warranty period: 12 months after the date of delivery ] ]

CTN :45712880

20 Jul, 2026 49.95 Lacs

Bareilly - Uttar Pradesh

Tender For supply of plastic shredder manual feeding, 6 to 8 kg per hr , weighing scale 200 kg capacity , screw type bending and heating equipment 10 to 12 kg per hr with motor, gearbox and control panel , hydraulic press , die for 150 x 150 x 40 mm paver block , die for 200 x 100 x 40 mm paver block , wet cyclone scrubber with ducting and blower , containerized setup 20x8 with electrical fittings , commissioning of machines including logistics , consultancy fee

State Government

CTN :45678034

14 Jul, 2026 28.50 Lacs

Jummu - Jammu And Kashmir

Tender For providing, installation, testing and commissioning of electro-mechanical equipments at newly drilled t/well peerkho. - providing of 3 nos. submersible pump sets :- the job involves providing of 3 nos. submersible pump sets of specification 15000 gph x 80 m head of reputed make (one no. operational and two nos. standby) along with allied accessories to be installed in 10/12 inch dia. deep drilled new tube well peer kho. the job includes fabrication, providing and fitting of 2 no. clamps of span as per the required length to be fabricated and fitted with submersible pump sets with the help of heavy duty bolts and nuts (01 no. clamp to each pump set). the job also includes fabrication of 2 no. graded expander/ reducer for nrv of required size to be fabricated out of suitable thickness ms pipe threaded at one end and flanged at the other end. fitting of reducers/ expanders with 125 mm dia. column pipes at one end with flanged joint and with the discharge outlet of the submersible pumps at the other end.column pipes :- fabrication and providing of 125 mm dia. b class ms 20 nos. column pipes flanged on both ends. the length of each pipe shall be 3 mtrs. and shall be completely leak proof. the ms pipe shall be confirming to relevant isi specifications. the heavy duty flanges shall be furnished properly. one end of the flange shall be faced in such a way that a leak proof joint is made by providing and fitting a rubber sheet in between the two flanges and tightening it with nuts and bolts. each flange shall be provided with 6 no. equidistant holes of required dia. the job also includes welding of flat iron strips at each end for giving extra strength to the flanged joint and providing of 2 no. grooves on each flange on opposite sides for submersible cable to be accommodated though it. the welding of heavy duty flanges with the pipe should be carried out with superior quality pipe welding electrodes. then painting all the pipes with a coat of anti corrosive paint and two coats of super enamel paint. ms well cap, washout and riser pipe :- fabrication and fitting of ms well cap as per casing dia. of 8 mm thickness with one hole of approx 125 mm dia. in the centre and with holes/ cuts at an appropriate distance for passing submersible cable. providing and fitting of an arrangement for gi fitting near the discharge head outlet to provide water feeding to the gravel around the tube well casing. laying of delivery line for making of inter connections of top column pipe of new tube well by way of fabricating 900 ms bend out of 125 mm dia. ms pipe, welding of 2 no flanges one at each end. fabrication and fitting of 125 mm dia. ms pipe connection piece long as per site requirement with 90 degree bend with the help of nuts, bolts, washers, rubber sheet in between for leak proof joint. fitting of 1 no. 125 mm dia. heavy duty c.s. sluice valve through a connection piece as per site condition. fabrication, providing and fitting of 1 mm dia. heavy duty cast steel reflux valve. the sluice and reflux valve shall be confirming the isi standards and shall be of reputed make. fabrication and fitting of another 125 mm dia. connection piece flanged at both ends for working of washout by way of interconnecting delivery pipe through tee joint with the washout pipe.. fabrication and fitting of 1 no. blind flange at the end of washout. painting of exposed parts of the delivery line with two coats of anti rust primer and one coat of super enamel paint. the job also involves fabrication and fitting of one set of u-shaped clamps (for holding 125 mm dia. pipe) on the top column pipe for holding of column assembly on the casing and fabrication of 1 set of u- clamps to be used for extraction/ lowering of pump set along with column assembly. complete job includes cost of material, labour charges and carriage etc. and also making provision for wash out by providing and fitting of sluice valve of c.s of required capacity as per site conditions.lowering of submersible p

CTN :45197714

29 Jun, 2026 NA

Imphal - Manipur

Tender For bid to ras supply of light duty hexagonal socket set 6 to 22 ratchet , heavy duty hexagonal socket set 24 to 50 set of 10 , double end open jaw spanner 6 to 32 set of 12 , pipe wrench set of 4 8coma 10coma 14 and 18 inch length , pipe wrench 24 inch , allen key set 3 to 12mm set of 10 , piston ring expander set of 2 small and big , piston ring compressor , torque wrench 25 to 150 lbs , ball peen hammer 300 gms with wooden handle , ball peen hammer 600 gms with wooden handle , inner circlip plier 7 inch set of 4 , external circlip plier 7 inch set of 4 , hyd jack 10 ton cap with lever , hyd jack 20 ton cap with lever , cold chisel set of 5 , box spanner 27 af , heavy duty pipe wrench hpw 36 , cordless hand drill 18v , angle grinder 750w , long nose plier size 4 pt 5 inch set of 6 , cutting plier size 8 inch set of 3 , adjustable wrench size 12 inch , screw driver slotted head set of 5 , screw driver philips head set of 5 , oil filter remover , cantilever tool box 18 inch x 8 inch x 8 inch , heavy duty socket size 33mm , heavy duty socket size 34mm , double faced sledge hammer with hickroy wooden handle ) /bid number : gem/2026/b/7465342 * /dated: 14-05-2026 & & / bid document 1 / 33

CTN :45691068

13 Jul, 2026 NA

Raigarh - Chhattisgarh

Tender For supply, erection, commissioning, operation and maintenance of plastic shredder unit, supply, erection, commissioning, operation and maintenance of hydraulic balling plastic unit, supply, erection, commissioning, operation and maintenance of trammel unit and supply, erection, commissioning, operation and maintenance of incineration unit. (2nd call)

State Government

CTN :45431206

30 Jun, 2026 NA

Malappuram - Kerala

Tender For corrigendum : supply,installation,testing and commissioning of 12 items of equipment for incubation cum entrepreneurship centre for plastic waste management, dept of economics,university of calicut under the pm-usha scheme - sorting conveyor with sensor, plastic crushing machine, plastic baling machine - hydrolic, plastic shredder machine, plastic grinding machine, plastic extrusion machine, moulding machine, faad machine, chiller machine, aglo machine, plastic squeezer machine, miscellaneous equipment:flexural and compression testing machine

CTN :45120113

22 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For bid to ras supply of manufacture & supply of h. s. c. centrifugal pump 25cusec capacity and 32mtr head, complete with base , supply of suitable 3.3 kv ht squirrel case induction motor at stage-1 of umarahat pump canal phase-1 , supply of suitable 3.3 kv ht vcb panel (1 incomer+ 3 outgoing) at stage-1 of umarahat pump canal p , supply of suitable pipe reducers in suction side of sluice valve & pump suitable pipe expander in de , installation, testing & commissioning of above equipment at stage-1 , manufacture & supply of h. s. c. centrifugal pump 50cusec capacity and 22mtr head, complete with base , supply of suitable 3.3 kv ht caca induction motor at stage-2 , supply of suitable 3.3 kv ht vcb panel (1 incomer+ 1 outgoing) at stage-2 , supply of suitable pipe reducers in suction side of sluice valve & pump, suitable pipe expander in d , installation, testing & commissioning of above equipment at stage-2 , supply of suitable 3.3 kv ht capacitor at stage-1 & stage-2 of umarahat pump canal phase-1.

CTN :45482081

16 Jun, 2026 16.00 Lacs

Faridabad - Haryana

Tender For installation of one unit of plastic shredder plastic bailing dust remover machine at block level plastic waste management unit tigaon under sbmg in district faridabad

CTN :45399436

08 Jun, 2026 16.00 Lacs

Faridabad - Haryana

Tender For installation of one unit of plastic shredder plastic bailing and dust remover machine at block level plastic waste management unit tigaon under sbmg in district faridabad

CTN :45449176

15 Jun, 2026 49.95 Lacs

Bareilly - Uttar Pradesh

Tender For supply of plastic shredder manual feeding, 6 to 8 kg per hr , weighing scale 200 kg capacity , screw type bending and heating equipment 10 to 12 kg per hr with motor, gearbox and control panel , hydraulic press , die for 150 x 150 x 40 mm paver block , die for 200 x 100 x 40 mm paver block , wet cyclone scrubber with ducting and blower , containerized setup 20x8 with electrical fittings , commissioning of machines including logistics , consultancy fee

Plastic Shredder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government