Latest plastic spade Tenders | Government plastic spade Tenders

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

CTN :45513102

22 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For provn of fd security light solar , pole for solar street light , erection tools , electronic protection , battery enclosure

CTN :45154800

09 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras supply of air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set , ark welding set 200 amp with 20 mtr cable and holder complete , air gun with spring type pipe , air impect gun heavy duty , alien key 03 mm 10 mm , bench vice heavy duty , battery charger c 12 72 , battery load tester , boost cable , centre punch 6 inch , circlip plier inner heavy duty , circlip plier outer heavy duty , cold flat chisel 6 , combination plier , complete mechanic tool box steel three fold with tools , copper welding cable , crash helmat , dah with handle , de spanner set 06 pic 8x9 to 18x19 , de spanner set 12 pic 8x9 to 30x22 , diesel spray gun , digital multimeter , drill bit set , electronic welding screen , eletrode holder , envil 100 kg , file flat bustard with handle 12 , fire extinguisher half kg , first aid box , foot pump electric , gear box trolly jack , goggles for motor cycle , grease gun bucket 20 kg air operated pneumatic , hammer ball pen 2 lbs with handle , hand drill machine , hand gloves leather , hand grinder , hexa frame , hub puller heavy vehicle , hydraulic jack 5 ton , hydrolic trolly jack 03 ton , hydrolic trolly jack 10 ton , hydrometer , hydrualic press hand oprated small , impact screw driver , inspection lamp with 5 mtrs wire and clip , iron trey 24 inch x 18 inch x 3inch with handle , iron trey 36 inch x 24 inch x 3 inch with handle , mechanic trolly creeper , oil cane 250ml , oil filter openner multy purpose , pad lock with key , paint spray gun , pick axe 4 5 lbs , pipe wrench 16 inch , plier adjustable , plug spanner mpfi , piston ring compressor , screw driver 10 inch , screw driver 6 inch , screw driver philips 6 inch , shawel , socket spanner 6mm to 14mm with complete ) /bid number : gem/2026/b/7526987 * /dated: 11-05-2026 & & / bid document 1 / 104 shawel , socket spanner 6mm to 14mm with complete attechment , socket spanner hexagonal 8mm to 32mm , soldring iron 125w heavy duty , soldring paste 50 grm pack , soldring wire 08 mm 50gm pack , spanner adjustable 8 , tool box steel two fold , torque wrench 250 lbs , torque wrench 3 mkg to 7 mkg , tubeless tyre puncture kit , tyre pressure gauge , tyre inflating hose , tyre lever heavy duty taparia , vaccum cleaner big size nt 70 2 , valve die , water thermameter digital , welding hand safety gloves leather , alien key 17mm , adjustable wrench 300 mm , cold flat chisel 19 mm , cold flat chisel 17mm , file square with handle 6 , file flat bustard with handle 6 , file flat round smooth handle 6 , file flat bustard with handle 10 , fire extinguisher 2 kg , fuel funnel small , fuel funnel big , filler gauge , grinder stone 4 , hand grinder elerical , measurement 200 ml , measurement 250 ml , measurement 500 ml , measurement 1 ltr , measurement 2 ltr , measurement 5 ltr , nose plier 6 , pipe wrench 10 inch , piston ring compressor big , piston ring compressor small , piston ring expender heavy veh , piston ring expender light veh , rottery pump , ring spanner 6x7 to 30x32 , screw driver 8 inch , screw driver 4 inch , screw driver philips 8 inch , screw driver philips 4 inch , screw driver combination kit , scissor 8 , steel foot rule 12 , spark plug spanner 21 no , tong 16 inch sandasi , tool box steel three fold , trolly for carring engine assy jib crane hv vehicle , tyre inflator machine heavy vehicle with accessories , tyre inflating hose with nozzle air comp d cyl 200 ltrs tank 3hp 3ph motor with nrv a cut air inflator comp set, ark welding set 200 amp with 20 mtr cable and holder complete, air gun with spring type pipe, air impect gun heavy duty, alien key 03 mm 10 mm, bench vice heavy duty , battery charger c 12 72, battery load tester , boost cable , centre punch 6 inch, circlip plier inner heavy duty, circlip plier outer heavy duty, cold flat chisel 6, combination plier , complete mechanic tool box steel three fold with tools, copper welding cable , crash helmat, dah with handle, de spanner set 06 pic 8x9 to 18x19, de sp

CTN :45460346

08 Jun, 2026 NA

Multi City - Meghalaya

Tender For auction sale of machineries, electric industrial, non-electric industrial, metallic, non-metallic, others - forward auction for disposal of mixed lot of surplus, obsolete and unserviceable stores consisting of electronic items, machinery, tools, computers and other scrap items on "as is where is basis" through gem portal

CTN :45441086

18 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of general electric goods - supply of switch gear/fuses, bch, techinc, schneider havells make, supply of switch gears, bch, techinc, schneider havells make, supply of copper & aluminum lugs/tools and dies, dowells make, supply of switch gear/fuses, schneider havells hpl make, supply of gears/change overs/mcb s etc, schneider havells hpl make, supply of lamps/flourescent tubs/cfl/luminaries/fitting blasts etc, surya , heavells philips, r.r., gold medal, supply of ac/dc/meters; ct s etc, ae make, supply of ocb s/resistance box spares, ae make, (a) insulating items- insulating varnish elmoluth.-1, isi/iso standard , beck tol red 1 kg. pack, isi/iso standard, thinner for beck tol red, 1 litre tin, isi/iso standard, p.v.c. tape x 10 meters steel grip in red, yellow, blue&black colour,isi/iso standard, empire tape 1 x 50 meters, isi/iso standard, glass tape 1 x 50 meters, isi/iso standard, cotton " " " , isi/iso standard, film insulation sheet 10 mm, isi/iso standard, lethoride sheet 10 mm, isi/iso standard, glass sleeve 1.5 mm. (1 mtr. long) isi/iso standard, glass sleeve 3.0 mm. isi/iso standard, glass sleeve 5.0 mm., isi/iso standard, do 8mm. isi/iso standard, do 10mm. isi/iso standard, do 12mm. isi/iso standard, hylam tube dia 3/8 thickness 2 mm., 1 mtr. long, isi/iso standard, hylam tube dia - do - isi/iso standard, crimple paper isi/iso standard, backelite sheet 20 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 25 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 1.5 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 3 mm. x 1 mtr. x 1 mtr. isi/iso standard, do 13 mm. x 1 mtr. x 1 mtr. isi/iso standard, fibre backelite rod 2 x 1 feet. isi/iso standard, (b)terminal plates & fans for motors -terminal plates for 40 h.p. motor. isi/iso standard, do 125 h.p. motor. isi/iso standard, do 75 h.p. isi/iso standard, do 60 h.p. isi/iso standard, do 15 h.p. isi/iso standard, do 05 h.p. isi/iso standard, do for four speed ng 700 centrifugal machine. isi/iso standard, (c) aluminum fan for 75 h.p. vertical motor. isi/iso standard , do 60 h.p. isi/iso standard, do 25 h.p. isi/iso standard, do 15 h.p. isi/iso standard, do 05 h.p. isi/iso standard, (d) plastic fan plastic fan for k.h.-160, 25 h.p. isi/iso standard , do 10 h.p. isi/iso standard, do 5 h.p. isi/iso standard, (e) lighting accessories side holder for tube light, isi/iso standard , tube light strator, isi/iso standard, halogen holder, isi/iso standard, s.c. holder for 100 watt bulb isi/iso standard, -do- 300 watt isi/iso standard, s.c. holder for m.v. fitting 400 watts, isi/iso standard, hand lamp complete, isi/iso standard, pendent holder, isi/iso standard, tumbler switch 15 amp. surface type, isi/iso standard, -do- 5 amp. isi/iso standard, socket 3 pin - do - isi/iso standard, -do- 5 amp. isi/iso standard, wooden board 10 x 12 . isi/iso standard, m.c.b. box 2 ways/4 way. isi/iso standard, 10ways/12ways isi/iso standard, glass fuse 6 amps. isi/iso standard, glass fuse 8 amps. isi/iso standard, glass fuse 10 amps. isi/iso standard, (f)1- excitation coil for 40 h.p. isi/iso standard, 50 h.p, isi/iso standard, electronic controller for 50 h.p.dynodrive motor, isi/iso standard, assembly with t.g. coil dynodrive 50 h.p, isi/iso standard, mannual controler for 50 h.p, isi/iso standard, solonoid coil k-593-712 240 volt. for ng-700 c/f machine, isi/iso standard, do but for 1. ton. c/f machine, isi/iso standard, base mounting type synchronous timer e.m.1000 isi/iso standard, -do- 3 - 60 sec. isi/iso standard, -do- 0.15 - 3 min. isi/iso standard, (one instantaneous + 2 delay contacts) isi/iso standard, flush mounting type synchronous time e.m.1000, isi/iso standard, do 3 60 sec. isi/iso standard, do 0.15 3 minutes. isi/iso standard, (one instantaneous + 2 delay contacts) isi/iso standard, push button element 1nc. isi/iso standard, -do- 1 no. isi/iso standard, -do- push button without element. isi/iso standard, -do- selector switch, 2way (on-off) isi/iso standard, -do- selector switch, 3way (o

Central Government/Public Sector

CTN :45072404

04 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : tender for supply of 32 types of tools - battery gun standard , feeler gauges 0.05mm to 1.0mm , torque wrench 5 to 25 nm , torque wrench 1 to 200 nm , allen key set 1.5 to 32 mm , magnetic lifter for fod & removal , vacuum cleaner portable , inspection mirror flexible , stop watch digital , knock out punch de rivetting , tap wrench , strap wrench capacity 125 mm , electronic soldering iron 230v 68w , hand tap m5x0.8 to 6h for tapping , hand tap m6x1 to 6h for tapping , helicoil hand tap set m 4 x 0.7 set of 3 , helicoil hand tap set m 5 x 0.8 set of 3 , helicoil hand tap set m 6 x 1.0 set of 3 , helicoil hand tap set m 8 x 1.0 set of 3 , helicoil hand tap set m 8 x 1.25 set of 3 , helicoil hand tap set m 10 x 1.25 set of 3 , helicoil hand tap set m 12 x 1.25 set of 3 , helicoil hand tap set m 24 x 2.0 set of 3 , helicoil hand tap set m 30 x 2.0 set of 3 , helicoil thread plug gauge m2 x 0.4 , engraving gun 230v ac , centre punch 4 , oil can capacity 500 cm3 , measuring jar 5 litres , spirit level for levelling purpose , rivet removal tool , depth gauge

corporations/Associations/Others

CTN :45368400

08 Jun, 2026 NA

Multi City - Multi State

Tender For auction sale of miscellaneous electronic scrap as per lot description details,spare parts and other tools etc as per lot description details,miscellaneous items etc as per lot description details,burn oil,consumable items etc as per lot description details

State Government

CTN :45343214

04 Jun, 2026 56.93 Lacs

Daman - Gujarat

Tender For providing and supplying of auxiliary items for old collectorate, daman - civil works others, providing and fixing 25mm thick commercial grade plywood on ms structural framework, including fabrication and erection of necessary m.s. square/rectangular pipe structure, cutting, welding, grinding, primer painting, fixing of plywood with suitable screws, nuts, bolts and approved hardware fittings, complete with all labour, materials, tools & tackles, transportation, loading/unloading, scaffolding and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring of approved make such as mikasa or equivalent, comprising top uv coated wooden wear layer bonded on plywood base, in approved shade and pattern, including surface preparation, underlay wherever required, adhesive fixing, cutting, edge finishing, skirting/joint treatment, complete installation with all necessary accessories, labour, tools & tackles, transportation, loading/unloading and finishing work as directed by the engineer-in-charge., providing and fixing 15mm thick engineered solid wood flooring skirting and t-patti work in approved shade and finish, including 75mm / 50mm size matching wooden skirting, plywood base/patti as required, fixing with suitable adhesive, nails and hardware accessories, cutting, edge finishing, polishing and complete installation with all labour, materials, tools & tackles, transportation, loading/unloading and finishing work, complete as directed by the engineer-in-charge., providing and fixing 3mm thick underlay foam sheet below wooden flooring, of approved quality and make, including surface cleaning and preparation, laying with proper alignment and jointing as per manufacturer specifications, complete with all labour, materials, tools & tackles, transportation, loading/unloading and necessary finishing work, as directed by the engineer-in-charge., labour charges for laying and fixing wooden flooring, including application of approved adhesive/glue and liquid compound, proper cutting, fitting, alignment and finishing of flooring boards/tiles, complete with necessary labour, tools & tackles, handling, cleaning and all incidental works required for proper installation, as directed by the engineer-in-charge., providing and fixing gypsum board partition/wall panelling above bathroom wall area, using approved quality moisture resistant gypsum board fixed on g.i. framework with necessary channels, studs, screws and jointing compound, including cutting, finishing, taping of joints, surface preparation and complete installation with all labour, materials, tools & tackles, scaffolding, transportation, loading/unloading and finishing work, as directed by the engineer-in-charge., providing and fixing room carpet of approved quality, design, colour and make, suitable for indoor flooring application, including necessary underlay wherever required, cutting to required size, transportation, loading/unloading and all incidental charges, complete as directed by the engineer-in-charge., providing, testing & commissioning 40 litre capacity solid door thermo-electric mini bar/refrigerator of approved make and model, suitable for hotel/office/residential use, complete with adjustable shelves, temperature control system and all standard accessories, including transportation, loading/unloading, placement at site and testing & commissioning, complete as directed by the engineer-in-charge., providing and fixing hotel safety locker/safe of size 200 x 420 x 370 mm, black colour, with electronic digital locking system, suitable for hotel/office/residential use, complete with mounting accessories and standard fittings (battery not included), including transportation, loading/unloading, installation and testing, complete as directed by the engineer-in-charge., providing testing & commissioning double layer electric kettle, black colour, of approved make and capacity, with stainles

State Government

CTN :45311399

25 May, 2026 NA

Birpur - Bihar

Tender For corrigendum : supply, installation, testing, commissioning, training and operation & maintenance of instrumentation and tools for ? hydraulic modelling lab, ? sediment lab, ? electronic and instrumentation workshop, at physical modelling centre (pmc), centre of excellence (coe) birpur, supaul, bihar

Central Government/Public Sector

CTN :45329483

17 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate numbers of anti

Plastic Spade Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector