Latest plastic tee Tenders | Government plastic tee Tenders

State Government

CTN :45298964

02 Jun, 2026 7.00 Lacs

Jaipur - Rajasthan

Tender For nit 14.1 procurement for supply of various sizes of cid joints long collar for hdpe pipes in division store, jaipur

CTN :45304567

08 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link - made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm od b g.i pipe. seat rest pipe 42 mm od b class g.i pipe. handl

corporations/Associations/Others

CTN :45277495

28 May, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

CTN :45298008

11 Jun, 2026 NA

Parganas - West Bengal

Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh multistran

State Government

CTN :45290318

02 Jun, 2026 7.00 Lacs

Jaipur - Rajasthan

Tender For nit 14 .1 procurement for supply of various sizes of cid joints long collar for hdpe pipes in division store, jaipur

State Government

CTN :45296711

08 Jun, 2026 83.45 Lacs

Multi City - Chhattisgarh

Tender For balance work of construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 12 mt. (65% balance work) at khawashfadki, 40 kl capacities & staging 12 mt. (85% balance work) at nawagaon including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber & providing, laying, jointing, interconnection, testing and commissioning of 90 mm dia upvc class 06/10 kg/sqcm pipe, 63/75 mm dia hdpe class 06 kg/sqcm pipe with suitable joints, valve specials and all fittings including all allied civil works, including electric connection from cspdcl, road cutting, switch room cum pump house, information board, construction of boundary wall around the over head tank, installation of electro chlorinator, construction of chlorinator room, providing functional household tap connection (f.h.t.c) in individual households and government institution etc. complete with 03 months trial run, operation & maintenance for 06 months under single village of piped water supply scheme under jal jeevan mission for village panchalfhadki, khawashfadki, nawagaon block manpur district- mohla-manpur-a.chowki .

State Government

CTN :45296712

08 Jun, 2026 73.30 Lacs

Multi City - Chhattisgarh

Tender For balance work of construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 12 mt. (85% balance work) at tumdikasa including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber & repairing work of existing oht at nedgaon providing, laying, jointing, interconnection, testing and commissioning of 90 mm dia upvc class 06/10 kg/sqcm pipe, 63/75 mm dia hdpe class 06 kg/sqcm pipe with suitable joints, valve specials and all fittings including all allied civil works, including electric connection from cspdcl, road cutting, switch room cum pump house, information board, construction of boundary wall around the over head tank, installation of electro chlorinator, construction of chlorinator room, providing functional household tap connection (f.h.t.c) in individual households and government institution etc. complete with 03 months trial run, operation & maintenance for 06 months under single village of piped water supply scheme under jal jeevan mission for village tumdikasa nedgaon maler block manpur district- mohla-manpur-a.chowki .

State Government

CTN :45296713

08 Jun, 2026 62.19 Lacs

Multi City - Chhattisgarh

Tender For balance work of construction, testing and commissioning of r.c.c. elevated service reservoir of 40 kl capacities & staging 12 mt. (75% balance work) at piparkhar including providing and fixing of ci double flange pipe, double flange specials & di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber & providing, laying, jointing, interconnection, testing and commissioning of 90 mm dia upvc class 06/10 kg/sqcm pipe, 63/75 mm dia hdpe class 06 kg/sqcm pipe with suitable joints, valve specials and all fittings including all allied civil works, including electric connection from cspdcl, road cutting, switch room cum pump house, information board, construction of boundary wall around the over head tank, installation of electro chlorinator, construction of chlorinator room, providing functional household tap connection (f.h.t.c) in individual households and government institution etc. complete with 03 months trial run, operation & maintenance for 06 months under single village of piped water supply scheme under jal jeevan mission for village ledijob, piparkhar & mungeshitola block chowki district- mohla-manpur-a.chowki .