Latest plate gauge Tenders | Government plate gauge Tenders

CTN :42122286

22 Oct, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For providing of custom bid for services - custom bid for services - annual maintenance contract for ground support equipment-work / schedule of requirement for maintenance, to be undertaken during period of amc, 1. adaptor maintenance stand pt no. 284557-1-1, 1.1, 1.2, 3.1, weekly inspection, 1.1.1 visually check the serviceability of item., 1.1.2 check cleanliness and husbandry state of the item., monthly inspection, 1.2.1 check visually condition of the item., 1.2.2 check condition of rubber beading., yearly inspection, 1.2.3 check item for operational condition., 1.2.4 painting of the item., 2. towing arm for dornier aircraft pt. no. misc-1512, 2.1 weekly inspection, 2.2, 2.1.1 visually check the serviceability of item., 2.1.2 check cleanliness and husbandry state of the item., 2.1.3 lubricate moving parts., 2.1.4 check the condition of wheel., monthly inspection, 2.2.1 clean and apply grease on moving parts., 2.2.2 check visually condition of the item., 2.2.3 check condition of wheel., 2.2.4 check condition of rubber beading., 2.3 yearly inspection, 2.3.1 check item for operational condition., 2.3.2 painting of the item, 3. nitrogen trolley with gauge pt. no. misc-5011, 3.1 daily inspection, 3.1.1 check for the general condition of the trolley., 3.1.2 check the n2 pressure available in bottle., 3.1.3 check for any static leak., 3.1.4 check all wheel for free rotation., 3.1.5 calibration of gauge when due., 3.2 weekly inspection, t 3.2.1 check the operational serviceability state of item., 3.2.2 check cleanliness and husbandry state of kit., 3.2.3 check for any leakage and erratic reading shown by pressure, gauges., 3.2.4 operate as per user manual and put appropriate label to indicate, the state., 3.2.5 check the condition of wheel., 3.2.6 check for pressure in cylinder and serviceability of gauges., 3.3 monthly inspection, 3.3.1 clean and apply grease on cylinder knob screw., 3.3.2 check visually the condition of hose., 3.3.3 test regulator for proper functioning., 3.4 yearly inspection, 3.4.1 check gauge for calibration, 3.4.2 check condition of wheel., 3.4.3 painting of whole unit., 3.4.4 calibration of hose., 4. jack adopter nlg pt no. u01a070000, 4.1 weekly inspection, 4.1.1 check cleanness and husbandry state of item., 4.1.2 check the serviceability state of item as per the user's manual., 4.2 yearly inspection, 7.1.1 painting of whole unit., 5. jack nose/main pt. no. vtej-3610, 5.1 daily inspection, 5.1.1 check the serviceability state of item as per the user's manual., 5.1.2 check for any signs of leak., 5.2 weekly inspection, 5.2.1 visually check the serviceability of the jack and wheels., 5.2.2 check cleanness and husbandry state of item., 5.2.3 lubricate the moving parts., 5.2.4 check the serviceability state of item as per the user's manual., 5.2.5 check the oil level port and plug., 5.3 monthly inspection, 5.3.1 replenishment of oil., 5.4 yearly inspection, 5.4.1 load testing (load testing is mandatory after, serviceability), 5.4.2 authority: - oem operation and maintenance manual., 6. jack tail pt. no. vaj-1.5/650, 6.1 daily inspection, major un6.1.1 check the serviceability state of item as per the user's manual., 6.1.2 check for any signs of leak., 6.2 weekly inspection, 6.2.1 visually check the serviceability of the jack and wheels., 6.2.2 check cleanness and husbandry state of item., 6.2.3 lubricate the moving parts., 6.2.4 check the serviceability state of item as per the user's manual., 6.2.5 check the oil level port and plug., 6.3 monthly inspection, 6.3.1 replenishment of oil., 6.4 yearly inspection, 6.4.1 load testing (load testing is mandatory after, serviceability), 6.4.2 authority: - oem operation and maintenance manual., 7. working platform engine pt. no. 63205a-000-000aoof, 7.1 weekly inspection, 7.1.1 visually check the serviceability of the item., 7.1.2 check cleanliness and husbandry state of item., 7.1.3 lubricate the moving parts., major un7.1.4 check the condition of the wheel along with the

CTN :41740264

06 Oct, 2025 NA

Lohit - Arunachal Pradesh

Tender For bid to ras supply of d.e. spanner , d.e ring spanner , spanner box tubler , combination pliers , noise plier , screw driver , screw driver combination kit , screw driver phillips , chisel cold , hammer ball pin 02lbs , filler gauge , adjustable wrench , center punch , punch pin , steel rule , file flat bastard , file round smooth , file square , scissors , pad lock with key , noise plier inner , noise plier outer , mpfi plug spanner , wrench pipe , tool box with lock , torque wrench 250lbs , torque wrench 3mkg to 7mkg , portable hydraulic jack , portable hydraulic jack 03 ton , portable hydraulic jack 05 ton , trolly for mounting dismounting of gear box assy , brass drift up to 6 inch long , brass drift .5 inch to 6 inch , brass drift up 6 inch , anvil 100kg , air compressor double cylinder with complete , car washer double cylinder with complete accessories , grease gun bucket type , oil gun for filling toppling of oil level , vacuum cleaner electric operated ) /bid number : gem/2025/b/6655829 * /dated: 08-09-2025 & & / bid document 1 / 36

CTN :42140799

13 Oct, 2025 NA

Multi City - Multi State

Tender For supply of hmpbca015601013 pedestal,hmpbca015601019 motor foundation belt,hmpfbfa015602031 pedestal bearing,hmpfbfa015602032 return roller,hmpfbfa015602036 tail pulley,hmpfbfa015602039 gathering gear box,hmpfbfa015602058 take up pedestal bearing,hmpsca015603061 tail roller,hmpsca015603063 pedestal,hmpsca015603065 carrying roller,hmpsca015603066 return roller,hmpsca015603072 v pulley,hmpsca015603077 vertical roller,hmpceao15605097 blower,hmpdmda015606115 exhaust blower,hmptrao15608141 trunnion roller,hmpdba015610163 nozzle rod,hmpdba015610167 impeller,hmppdca015611186 v belt,hmpppa015612198 valve,hmpppa015612202 hose pipe,hmpppa015612203 pump,hmpppa015612208 level gauge,hmpppa015612209 filter,hmpmfua015613213 pump flange,hmpmfua015613217 hydex coupling,hmpbtao15614240 hot oil pipe,hmpbtao15614241 hot oil pipe,hmplocao15616254 tail roller,hmplocao15616255 take up bearing,hmplocao15616256 pedestal,hmplocao15616259 return roller,hmplocao15616260 v belt,hmplocao15616262 motor,hmplocao15616263 reduction gear box,a0hmp00115630

Central Government/Public Sector

CTN :41919451

03 Oct, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of lube oil system c c - sg9792149023_100 lube oil system , site supervision and functional demonstration , sg9792109013_liquid level ind , sg9792120017_pressure gauge , sg9792120025_pressure gauge , sg9792120033_pressure gauge , sg9792120041_pressure gauge , sg9792120050_pressure gauge , sg9792123016_dp gauge , sg9792124012_tem gauge , gt9755475010_level trans , gt9755473122_pre tran , gt9755473130_pre tran , gt9755473149_pre tran , sg9792068015_dp tran , gt9755474021_dp tran , sg9792063013_du rtd , sg9792032037_thermowell , sg9792032010_thermowell , sg9792107029_20 microns filter , sg9792118012_pr.cntrl valve

CTN :42082920

13 Oct, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of quick setting compound rapidite make acclerex or cico or fosro conforming to is code 1344-2018 , stone aggregate to be crushed rhesco basket d d - ock or gravel 40mm graded confirming to is 383-1970 , manufatured sand conforming to is 383-2002 , collapsible welded wire mesh crate hesco basket of size 1.22mm x0.61mm x0.61mm as per tech spec att , pbs roll self finished tarfelt hessian base for water proofing grade-1 conforming to is 1322-1980 of size 20m x 0.90 m , hdpe sand bag laminated off size 75x40cm sand colour and each bag having weight not less than 60gms , thinner make asian or berge or shalimar. , synthetic enamel paint with two coat oxide primer , cement base paint , oil bond distemper obd of approved makes , pcc solid blocks 400mmx200mmx200mm minimum strength 50 kg per sqcm , hdpe sheet 400 micron , lightening conductor as per tech spect att , pre prefabricated steel door confirming to is 1038-1938 of size 900mm x2000mm as per tech spec , brick trowel steel 305 mm with handle. , brick hammer with handle weight 1.2 kg. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , plaster trowel with hard wooden handle isi marked. , galvanised iron pan mortar 16 gauge 16 inch dia minimum weight of 1.5 kg , fish line best quality brick line , plumb bob iron best quality with all accessories. , rammer earth with 6 ft long hard wooden handle minimum weight 5 kg without handle , picks axes with chiesel and point end kudali 14 cp nominal weight 3.0 kg overall length 595 mm with hard wooden handle. , showel square nose 14 gauge tata high carbon steel blade size 310 x 245 mm shaft size 710 mm hard wooden handles, , phowrah with hard wooden handles with min weight 2.00 kgs , painting brush 100 mm best quality. , multipurpose non slip rubber reusable gloves , aluminium spirit level 12 inch , water leveling pipe pvc 100 mtr , cutting plier insulates 6 inch , measuring tape 30 mtr

CTN :41986901

08 Oct, 2025 NA

Gwalior - Madhya Pradesh

Tender For tender for supply of led street light 90 watt , switch socket combination 5in 1 6/16 amp , switch socket combination 4in 1 5 pin 6 amp , mccb 250 amp 25 ka 4 pole , mccb 100 amp 16 ka 4 pole , mccb 160 amp 25 ka 4 pole , mcb triple pole c series 63 amp , led street light fitting 45 watt , mcb double pole c series 32 amp , onload changover switch 100 amp tpn , offload changeover switch 63 amp tpn , onload changeover switch 63 amp tpn , fr pvc flexible cablecopper 10 sqmm single core , mcb single pole c series 10 amp , fr pvc flexible copper single core 2.5 sqmm , electronic fan regulater medium step type 2 module , bell elec ding dong single phase , gate valve 40 mm , socket piano moduler 16 amp 1 way , socket outlet moduler universal 6/16 6pin , pvc tape insulation 20mm into 25 mtr , cable 6 sqmm twin core aluminium pvc , gate valve 50 mm , rubber insertion sheet 3 mm thick , socket outlet moduler 6 amp 3 pin multi socket , submersible cable 6 sqm 3core , rubber mste for electrical purpose2 mtr1 mtr into 12 mm , cotton wastefor cleaning purpose , sink mixer , kitchen sink mixer , flushing cistern 10 ltr capacity , wc seat cover , glass pane froster 4x3x3 mm , t reducer 15x20 mm , s/s anodised tower bolt 100mm , gi elbow reducing 25x15 mm isi , s/s anodised hasp and staple 100 mm , helical door spring 150 mm , putty oil for glass pane , gi elbow 20 mm dia isi , butt hinges s/s 100 mm isi , s/s screw wood 25 mm , pvc waste coupling 32mm , gi union 15mm , gi plug 20 mm dia , butt hinges s/s 75 mm isi , gi socket 25 mm , butt hinges s/s 125mm , flush washer for flushing cistern in pkt of 25 pieces , gi tee equal 20mm , ss screw wood 35 mm , brass lock 6 lever mortice 65mm with brass , gi nipple 20x50 mm , gi elbow 15 mm dia isi , delinators , fancy type decorative pvc sheathed gi curtain , ss screw wood 20 mm , washer pvc for low level fluishing cistern 50 nos pkt , ss bracket chromium plated for curtain rod 19 mm to 20mm , gi tee equal 15mm , gi red socket 25 x 20 mm , ss handle fabricated type anodised 150mm size , brass cp concealed stop cock 20 mm , cement white portland 01 kgs pack , nails wire 50mm , gate valve 200mm gm , aluminum sheet 24 gauge 4 feet wide , gi red socket 20 x 15 mm , brass washer jumper 20 mm qty 100 nos each pkt , brass washer jumper 15 mm qty 100 nos each pkt , stainless steel plate rack 24x36 x 10 , pvc shelf 18 inch , offload changeover switch 100 ams 415 volt tpn , pvc tape insulation 25mm x 25 mtr , mcb single pole c series 32 amp comma 230 v ac , mcb single pole c series 16 amp 230 v ac , lamp holder pvc insulated body angular type 230 v ac supply , aluminum lugs 300 sqmm , alluminium lugs 240 sqmm , gate valve 15mm gm , fuse wire copper thined 300 amp , fuse wire copper thined 400 amp , steel screw 50 mm with cup washer packet as 100 nos , aluminum lugs 120 sqmm , aluminum lugs 185 sqmm , lamp holder pvc insulated body pendent type 230 v ac supply , battery charging cable heavy duty brass terminal and brass lugs , capacitor 2.5 mfd ac 230 v suitable for ceilling fan , fuse wire copper thined 200 amp , led bulb 15 watt , mccb fp 250a , 25ka , mccb tp 250a , 25ka , mccb fp 100a , 10ka , mccb fp 100a , 16ka , switch piano flush type single pole one way 16 amp 230 volt , copper lugs 50 sqmm isi marked , aluminium lugs 10mm sqm isi marked

CTN :41833546

07 Oct, 2025 30.95 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of hydraulic spares for various equipments in phase i and ii chp, ctpp, chhabra - phase-i (wt-1&2,sac-1&2,s/r-1), gauge isolator valve: af6 ea 4x/x, pressure relief valve: db20-1-4x/050-in001, pressure relief valve: zdb6 vp2-4x/100v, directional control valve: 4we6 d 6x/e g24 n9k4, p.i.c: z4 grey ( ka133000a1), p.i.c: z4 black ( ka133000b1), pilot valve 3drep 6 c-2x/45eg24k4/m, check valve (cartridge): m-sr30 ke05-1x/, double throttle / check valve ; z2fs6-2-4x/2qv, pressure relief valve: dbds20 k1x/100, hand pump: 13cc/stroke 69-174 bar, check valve (cartridge): m-sr10 ke05-1x/, ball valve: khp-10-1-3-1-2-04x/h, ball valve: khb-g1/4" 1-2-1-2-01x/h, ball valve: khp-20-1-3-1-2-06x/h with steel crank handle, check valve (cartridge)" m-sr20 ke05-1x/, pressure relief valve: dbw20-b2-4x/315 6e g24 n9k4-in003, check valve (cartridge) m-sr8 ke30-1x/, check q-meter: fd12 pa 2x/b03v, check valve (cartridge)" m-sr10 ke02-1x/, filler/breather: fb 700 tt-40, oil level indicator 127/m10, rms 522, ball valve : ripa 40-19/khnv s g 1/4"-2233, ball valve : ripa 40-18/size 50, class 150 ansi-b16.5 model 84-f2 bdk+ limit switch 3se3-100-1, shuttle valve- cartridge: svc 06(nbr), float switch: ripa 50-03/t1 , red(ul) colour float/ upper(max.) level, float switch: ripa 50-03/t2 , green(ll) colour float/ lower(min.) level, wheel valve: ripa 40-05/size-g1 1/2", manifold block assembly (agi7228) hbav 148 h circuit no. hs64.3-a3339-3-0 for arm luffing cylinder of side arm charger, filter assembly for lfbn/hc 160 g10 c1.x/b6, filter assembly for lfbn/hc 330 g10 c1.x/b6, flow control valve: dv 30 0.1x/p/h, flow control valve: drv30 01.x/p/h, flow control valve: dvp 16-01.x/p/h, flow control valve: dvp-08-01.x/p/h, flow control valve: dv 08-01.x/ps/h, minimess hose ab20-11/1000-m 16x2, minimess coupling ab20-11/k1 g1/4", amplifier cards, amplifier card : vt-vspa2-1-2x/v0/t1, card holder for vt-vspa2-1-2x/v0/t1 item code: vt3002-1-2x/32d, amplifier card : vt-vspa2-1-2x/v0/t5, card holder for vt-vspa2-1-2x/v0/t5 item code: vt3002-1-2x/48f, joystick, joystick type: potentiometer for slewing drive mnr: r909830882 typ hg 120 gf/11, phase-ii (wt-3&4,sac-3&4,s/r-2), ball valve type: 51/3 1-1" (hd number: 577 7221-055), ball valve type: bkh-g1/2" (hd number: 577 7221-050), air filter/breather type: bfp3g10w1.x (hd number: 577 6723-008), air filter/breather type: bfp3g10w4.x (hd number: 577 6723-009), level gauge type: sna-254-b-n (hd number: 478 2277-035), quick connection type: anv 1gas m (hd number: 478 2277-032), quick connection type: anv 1gas f (hd number: 478 2277-031), test conection type: 2103-01-53.00, 9/16" unf x m16 (hd number: 2529 2412-310), test conection type: sna55+2103-01-17.00 ,jic 7/16unf (hd number: 577 7314-538), test connection type: 2103-01-21.00, 7/16" unf x m16 (hd number 2529 2412-300), test connection type: 2103-01-18.00, bsp 1/4"x m16 (hd number 2529 2412-110), test connection type: 2103-01-14.00, m16x1.5 (hd number 2529 2412-014), gauge isolator valve type: ft292-g-t (hd number: 478 2277-054), butterfly valve type: ab 16 s-63-he (hd number: 478 3233-209), check valve type: vu1f1fb (hd number: 478 3233-577), analog temperature sensor pt100 type: 66rns1011251213 (hd number: 577 7112-003), solenoid 24 vdc (hd number: 577 6216-056), check valve type: vu38f38fb (hd number: 478 3233-567), solenoid 24 vdc type: 517-00096-0 (hd number: 478 2277-729), valve cartridge 9a2 r939005425, check valve type: vu1f1fu (hd number: 478 3233-580), check valve type: vu114f114fm (hd number: 478 3233-583), check valve type: vu114f114fc (hd number: 478 3233-591), solenoid 24 vdc (hd number: 577-6216-140), unloading relief valve type: rs10m25s4sn1jw, directional control valve type: d41vw4c4njw75, hose break valve type: vls-06m2-06m3-2.0, flow control valve: dv-10-01.x/p/h, flow control valve: drv-20-01.x/p/h, flow control valve: dvp -20-01.x/p/h, flow control valve: drvp -20-01.x/p/h, spare for spider control system for pump

Central Government / Public Sector

CTN :41972279

14 Oct, 2025 NA

Vizianagaram - Andhra Pradesh

Tender For crushing of contractor's hard stone using mechanized crusher to 50mm gauge for a quantity of 23437 cum (as per specifications), transporting the same to vizianagaram depot-ii at oil siding, unloading and stacking on level ground including dressing of ground and loading the same into any type of railway wagons with contractor's own loading arrangements at vizianagaram depot-ii under the jurisdiction aden/vizianagaram of waltair division.

State Government

CTN :41730663

30 Sep, 2025 30.58 Lacs

Raichur - Karnataka

Tender For corrigendum : procurement of idct cell spares for ytps - idct gearbox input shaft lockup, idct gearbox c-type distance piece, bearing end cover for idct gerabox, idct gearbox oilgauge isolation valve, stack view glass for idct, output shaft bearing spacer set, intermediate shaft bearing spacer set, input shaft bearing spacer set, idct gearbox oil level dip stick, u clamp for idct gb fan, oil level dip stick idct, oil level gauge idct, lock washer mb-14 idct, breather plug idct, oil thrower idct

State Government

CTN :41860737

03 Oct, 2025 21.47 Lacs

Faridkot - Punjab

Tender For etender for special repair of medicine unit-2 in ggsmch faridkot - civil work part (a)removing doors and windows steel or wood with chowkhats by making recesses in walls when the wall is not to be dismantled. (doors), window, dismantling cement conglomerate floors 25mm to 50mm thick without concrete base, scraping of cement plaster from walls, supplying and fixing of japani sheet frames (chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to pwd specifications including bolts for fixing steps, lock notchprovision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of engineer-in-chargedoor and window frame of size 113mm x 60mm x with 35mm wide single rebate, doors and windows frame of size 151mm x 60mm with 35 mm wide double rebate weighing 3.95 kg per meter, first class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level., 20mm thick cement plaster 1:4 in two coat work, factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but ncluding labour for fixing the same in positioncommercial with elm or gurjan facing on both \ sides with laminated core and lipped edges:- (iv) 35mm thick door, kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment tomatch the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :, preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint., providing and laying vitrified floor tiles of different sizes in light colour shades made using double charge technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( design is homogenous throughout the tile body ), providing and fixing ceiling consisting of 12.5mm thick gypsum board of any size g.i. cradling hanged from the ceiling by means of g.i. hangercomplete as per drawings,specifications and to the entire satisfaction of engineer-in- charge., dismantling glazed tiles (to be carefully removed)., providing and laying anti skid ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading., providing and fixing 1st quality ceramic glazed wall tiles matt/semi matt/glosy/highly gloss finish/highlighter/emboss conforming to is :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by engineer-in- charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete., providing an

Plate Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

State Government

State Government