Latest plate reader Tenders | Government plate reader Tenders

State Government

CTN :45722562

04 Jul, 2026 10.00 Lacs

Jaipur - Rajasthan

Tender For tender for reagents of cr system single plate reader model-capsule xl11 drypix plus make-fuji film

State Government

CTN :45642829

30 Jun, 2026 NA

Davangere - Karnataka

Tender For e-tenders are invited from eligible suppliers for scientific equipments required for vgst sponsored project at department of studies in microbiology - mb/ elisa plate reader, mb/ ultra-low temperature freezer, mb/ double beam uv visible spectrophotometer, mb/ micro-pipette set for cell culture, mb/ electrophoresis unit (sds-page), mb/ microcentrifuge

CTN :45415553

25 Jun, 2026 NA

Coimbatore - Tamil Nadu

Tender For corrigendum : purchase of chemicals - purchase of chemicals, sterile tissue culture plate 96 flat-bottom wells, tissue culture treated surface, sterile, individually packed with size approx. 6.9 10.8 cm compatible with elisa/plate reader., sterile tissue culture plate 6 wells, growth surface treated sterile in condition well dimension approx. 35 17.5 mm., sterile tissue culture flask without hpde filter closure non-vent cap is required, flask must be sterile, disposable, and it must have 25 cm growth area., sterile tissue culture petri dish 35 mm diameter, tissue culture treated each plate must be sterile., cryogenic marker resistant to low temperature storage ( 20 c to 80 c), permanent ink, multi-colour pack red, blue, green and black, standard flask 100 ml borosilicate glass, autoclavable, chemical resistant, standard flask 250 ml borosilicate glass, autoclavable, chemical resistant

Central Government And Public Sector

CTN :45557581

06 Jul, 2026 NA

Delhi - Delhi

Tender For multi-mode plate reader

CTN :45527321

03 Jul, 2026 NA

Faridabad - Haryana

Tender For sitc of multimode plate reader

CTN :45240117

22 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : supply of biosafety cabinet (q2) , refrigerated centrifuge for general and research purpose (q3) , medical centrifuge (q3) , gel documentation system (q2) , deep freezer (q2) , water baths (q3) , auloclave-1 , autoclave-2 , bod incubator-1 , bod incubator-2 , data logger -80c, -20c , data logger - 80c, -20c, plus 4c 2no , elisa plate reader-1 , elisa plate reader-2 , elisa plate reader-3 , elisa plate washer-1 , elisa plate washer-2 , elisa plate washer-3 , floater rack , gel electrophoresis , gel electrophoresis and documentation unit , gel electrophoresis anddocumentation unit , laminar air vertical flow system , ice buckets , ice flaker machine , label printer , label printer brady printer , laboratory incubator , laboratory rocker and shaker , laminar air flow horizontal , laminar air vertical flow 2 feet , magnetic stirrer-1 , magnetic stirrer-2 , magnetic stirrer-3 , micro pipette 0.5 - 10 ul , micro pipette 10 - 100 ul , micro pipette 100 - 1000 ul , micro pipette 2 - 20 ul , micro pipette 20 - 200 ul , micropipettes , microwave oven for agarose gel , microwave oven for agarose gels , multi channerl 30 - 300 ul , multifunctional copier or printer or scannerfor office work , pan electronic weighing balance-1 , pan electronic weighing balance-2 , pcr workstation , ph meter , quick spin , quick spinner-1 , quick spinner-2 , quickspin for 1.5, 2ml tubes. pcr tubes and plates , refrigerated micro centrifuge , refrigerated microfuge , refrigerator , refrigerator sample receiving , themo cycler-3 , themocycler-2 , thermo cycler-1 , timer-1 , timer-2 , ultrapure water system , unichannel and multichannel pipettes , uv dosimeter-1 , uv dosimeter-2 , uv dosimeter- 3 , vortex mixer-1 , vortex mixer-2 ) /bid number : gem/2026/b/7544629 * /dated: 18-05-2026 & & / bid document 1 / 69

CTN :45512793

02 Jul, 2026 NA

Bangalore - Karnataka

Tender For triaxial accelerometer 100m v g weight 6 to 8 grams technical spec as per anx i , suitable low noise calbe 30 meter 4 socket 1 by 4 28 unf 4 pf to 3xbnc m and technical spec as per anx vii , triaxial icp type accelerometer 10m v g withstand less than 200 deg c weight 4 to 5 grams technical spec as per anx ii , low noise cable 4 socket miniature type for tri axial miniature type accelerometers anx vii , modal array icp type accelerometer 100m v g weight 5 grams, withstand technical spec as per anx iii , low noise coaxial calbe 30 meter 10 to 32 coaxial plug to bnc and technical spec as per anx vi , icp impedance head acceleration 100m v g force transducer 100mv lb technical spec as per anx iv , low noise cable 30 meter 10 to 32 coaxial plug to bnc plug anx viii , low noise cable 3 meter 4 socket annexue x , low noise cables 5 meter 4 scket annexure x , low noise cables 10 meter 4 socket annexure x , proper storage cases for accelerometer sensors and cables and exciters annexure xi

CTN :45475071

15 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of non-consumables for ece department - purchase, dual output regulated dc variable power supply input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v overload protection. dc offset: 0 to 10 v adjustable. attenuation: 0 to 60 db., dso (digital storage oscilloscope) bandwidth: 50 100 mhz. sampling rate: 1 gs/s. channels: 2 (minimum). power supply: 100 240 v ac, 50 60 hz. automatic measurements: vpp, vavg, vrms, frequency, period, vmax, vmin, rise time, fall time, +width, width, +duty, duty, etc. horizontal scale: 5 ns/div 50 s/div or equivalent. vertical resolution: 8 bits (2 channelssimultaneously). vertical sensitivity: 1 mv/div 10 v/div (at input). waveform math: +, , , , invert, fft, etc. waveform storage: 16 waveforms or equivalent. communication interface: usb host and usb interface. display: 7-inch color display or equivalent. input impedance: 1 m 2% || 20 pf. accessories: 2 passive probes (1x/10x)., digital ic trainer kit with breadboard +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulse per press)., lvdt trainer kit ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain guage trainer kit ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. signal conditioning and amplification circuit. instrumentation amplifiers with 3 digit display for strain / output voltage. zero and gain adjustment controls. provision for applying calibrated loads. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual.

CTN :45465678

19 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply, installation and testing of electronic equipments - supply -ece lab equipments, single output regulated dcvariable power supply- input voltage: 230v / 50hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., dual output regulated dc variable power supply- input voltage: 230v/50 hz ac. output voltage: (0 30)v dc. output current: (0 2)a dc. protection circuit: over voltage, over current, and short-circuit protection. high efficiency: greater than 85%. low ripple and noise: less than 50 mv. digital display., function generator - frequency range: 0.1 hz to 5 mhz. display: 4 to 6 digit led display. output waveforms: sine, triangle, square, pulse, ramp. amplitude: 0 20 vpp. rise time: 100 ns. distortion: 1% within specified frequency range. power supply: 230 v ac 10%, 50 60 hz. output amplifier protection: short-circuit and 15 v, digital ic trainer kit with breadboard - +5 v dc, 1 a regulated power supply. 12 v dc / 15 v dc, 200 ma regulated power supply. solderless breadboard with minimum 840 tie- points,power distribution buses. zif (zero insertion force) ic sockets to accommodate 8 or 16 pin ics. logic input and output leds for output monitoring. 16 buffered led outputs. 16 debounced switch inputs. variable clock generator: 0.5 hz to 50 hz. single pulse output: 100 ms (buffered, positive and negative outputs). one seven-segment display with 4 bcd inputs. built-in logic switches. manual clock: debounced push-button (one pulseper press)., dc voltmeter(digital) - dc digital voltmeter - 3 digit led/lcd display, measurement range: 0 20 v dc,accuracy: class 0.5( 0.5 % full-scale), dc ammeter - dc ammeter digital - 3 digit led/lcd display, measurement range: 0 5 a dc,accuracy: class 0.5 ( 0.5 % full-scale), lvdttrainer kit - ac mains power supply: 230 v 10%, 50 hz. fixed regulated dc power supply: +5 v, 12 v / 500 ma. transducer: lvdt. lvdt displacement: 20 mm (40 mm total). displacement scale: linear 20 mm. displacement display: red color 3 digit led display. excitation frequency: 4 khz. excitation voltage: ac variable excitation voltage up to 5 v., strain gauge trainer kit - ac mains power supply: 230 v 10%, 50 hz metal foil strain gauge mounted on beam/cantilever. strain measurement under applied load. wheatstone bridge arrangement. instrumentation amplifiers with 3 digit display for strain / output voltage. table-top trainer with labelled panel. test points for signal measurement. built-in dc power supplies and wooden closed cabinet. supplied with patch cords and user manual., ask modulation and demodulation kit - message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. supply voltage (board): +12 v, +5 v dc. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., fpga trainer kit - must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb- uart bridge, usb cable. user manual., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

CTN :45292959

06 Jun, 2026 NA

Patiala - Punjab

Tender For supply of micro elisa plate reader with co2 incubator

Plate Reader Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government And Public Sector