Latest platform repair Tenders | Government platform repair Tenders

Central Government And Public Sector

CTN :41331533

26 Aug, 2025 NA

Kamrup - Assam

Tender For supply of working platform

Central Government / Public Sector

CTN :41195017

09 Aug, 2025 4.79 Crore

Jagatsinghapur - Odisha

Tender For corrigendum : custom bid for services - 9070c25b95 agency for heavy equipment resources for petrochemical and refinery area-contractor has to supply following heavy equipment on hire basis at iocl paradip refinery: a) one 250 mt tyre mounted telescopic boom crane and should have minimum 70 mtr boom length along with with extended 20 mtr jib length (i.e. total boom length 90 mtr ). it should have lifting capacity of minimum 25 mt at the lifting height of 40-60 meter from ground at the required radius of operation. the radius of operation of crane shall be around 65-70 mtr with 1 operator, 1 rigger and 1 helper. b) one 50 mt or above capacity all terrain tyre mounted telescopic boom crane (main boom full extended length should not be less than 30m) along with jib extension provision with 1 operator, 1 rigger and 1 helper. c) two 10-15 mt front cabin hydra with 1 operator & 1 helper. d) one 50hp tractor with 20t trolley with 1 operator & 1 helper. e) one 40 ton load carying capacity flat bed truck trailer (length-12 meter & width 2.5 meter)(tyre mounted) f) one articulated boom lift {diesel driven with minimum lift height of 20 m (~65 ft). the capacity of the basket at any position must be a minimum of 220 kg. the articulated boom lift must have cabin type working platform with self-closing gate with 180 degree hydraulic platform rotator. basket should contain safety rope ladder for the workmen to disembark and escape in case of danger or emergency} with 1 operator and 1 helper. g) two 3t or above capacity forklift (diesel operated) with 1 operator. h) one 5t or above capacity forklift (diesel operated) with 1 operator.

CTN :40540705

07 Aug, 2025 NA

Pune - Maharashtra

Tender For bid to ras supply of laboratory equipments and standards as per spec. no. hemrl/qard/spec/2025/lab equipments & standards - acid storage cabinet with exhaust system, capacity: 100-120 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , acid storage cabinet with exhaust system, capacity: 220-250 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , sample storage cabinet, capacity: 220-250 liter, qty: 02 nos. a. the laboratory sample storage cabinet should be made of pure stainless steel. b. there should have adjustable shelves and can be customized. c. should have double lock system. d. front door of the cabinet shall be in twin door design having glass panel. с. should be workable within temperature range of 10-50°c and humidity of 20-80%. f. door handles shall make of ss 304., glass membrane filtration assembly with three manifold system and vacuum pump & other accessories, qty: 02nos. vacuum filtration assemblies made of borosilicate glass that should be compatible with most organic solvents for solvent filtration purpose. b. funnel, receiver flask & filter support base should be made of borosilicate glass the filter support base design should have an integral vacuum connection located above the filtrate dip such that it can prevent contamination of the vacuum line from droplets. d. it should be three place manifold glass filtration assembly. glass funnel capacity: 300ml f. filter support base with sintered glass filter: 47mm. g glass receiver flask: i) 500ml-01 no, ii) 1000ml-01 no iii) 2000ml-01 no. h. aluminium clamp: 47mm i. effective filtration area: 9.6cm the filtration base should have a silicon stopper. k. all accessories should come with assembly. vacuum pump: , vacuum pumps are to be equipped with vacuum regulator to adjust vacuum. b. vacuum pump should have thermal protection device to shut off the pump automatically when overheated and resume working when temperature cools down. c. max. vacuum (mbar): 100 d. max flow rate (l/min): 17 e. motor rotation (rpm): 1450 , digital rotary shaker, qty: 02 nos. the rotary shakers comprises of shaking platform, speed regulator and timer to adjust duration of orbital motion. b. shaking platform should be made of ss 304 to avoid any kind of rust formation. clamps should be made of either unbreakable plastic or stainless steel d. the housing should be made with thick sheet of mild steel duly powder coated. motion: rotary motion f shaking mechanism: brushless motor used for shaking b digital lcd display with rpm controller provided in the panel. h over temperature alarm. speed (rpm): 20-200 accuracy: ±1°c k. volume capacity: should be of different sizes like as 16 x 250ml and 16 x 500ml. l platform dimension (inches): 18 x18 m. temperature control: electronic/automatic ceramic hotplate magnetic stirrer, qty: 06 nos. a. digital lcd display with back light. b. big size ceramic hot plate with flame protection and durability. e. heating and stirring can proceed simultaneously. d. temperature & stirring speed is stepl

CTN :41312062

20 Aug, 2025 7.56 Lacs

Murshidabad - West Bengal

Tender For service contract for fabrication of working platform near id fan and replacement of damaged gratings other locations as recommended by safety department, stage-i, under bm-1, sgtpp

CTN :41251455

09 Aug, 2025 NA

Rajauri - Jammu And Kashmir

Tender For supply of acsfp- nimbus aircraft propeller set 2ccw and 2cw repair , nimbus aircraft flight controller base board repair , nimbus aircraft top cover repair , nimbus aircraft frame backside top plate repair , nimbus aircraft drone arm repair , nimbus aircraft drone dropping platform repair , nimbus aircraft camera frame repair , nimbus aircraft gps stand repair , nimbus aircraft battery cells repair

Central Government / Public Sector

CTN :41280158

07 Aug, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of working platform trolley as per drawing no jhs/rs/4/sk no- 787. [ warranty period: 30 months after th e date of delivery ]

CTN :41192702

29 Aug, 2025 NA

Srinagar - Jammu And Kashmir

Tender For surgical instruments for ent surgeries. - ear speculum (shea & lempert), lempert endaural speculum, jenson mastoid retractor, micro ear suction cannulas with adaptor all different sizes (12-22 gauge), chisel with adapter., ear dissector, curved backwards, working length 5.5cm, total length 16cm., ear dissector, curved backwards, working length 5.5 cm total length 16cm., curette spoon shaped, diameter 1 mm, length 16 cm, house double curette, medium, spoon size 1x1.8mm, and 1x1.2mm, length 17cm, lempert s curette, rosens round knife diameter 3 mm, with suction pores, ear up forceps (delicate oval cupped jaws, 0.6 mm working length 10 cm), cat s paw retractor., faraboeuf periosteum elevator-115-117m length, 11mm wide curved, suction cannula angular luer lock outer diameter 1.3mm, 1.5mm & 2mm length 6 cm, myringotomy knife, luer cone suction adaptor for connection to suction tube with hole., micro scissors, delicate curved to left & right working length 8 cm and 8mm blade, ear alligator forceps extra delicate serrate 1x4.5mm working length 8cm, rosen sround knife with 1mm 1.5mm, 2mm, 2.3mm, 3.0mm, 3.5mm diameter, working length 16 cm and angle 45 , flag knife., wullstein curved needle,, right angled needle, flap repository, micro ear scissors, ossicles holding nibbler, cell seeker, micro ball probe, aditus seeker, plester sickle knife, duckbill, shea bellucci micro ear scissors straight, adjustable self-retaining surgical ear speculum, castroviejo iris scissors straight curved (14cm), micro ear forceps-oval cupped jaw straight 80mm,shaft 1.5mm thick, micro alligator forceps-line, wullestein needle-straight sharp 165mm length, wullestein post aural retractor-3x3 sharp prongs 110mm length, plester retractor 2x2 prongs 130mm length, belluci micro scissior -4 mm blade 80 mm length, i. straight, ii. right curved, iii. left curved, angled picks (45 degree and 90 degree), shea s perforators (0.6mm, 0.8mm), house gel foam pressure forceps large platform 30mm x 30mm, schwaber adjustable self retaining surgical ear speculum 50 mm blade, length 165mm, grommet applicator, autoclave instrument box with silicon mat, graft spreader, burr points, cutting 1 mm , 0.8mm tungsten carbide coated, cutting 2mm, tungsten carbide coated, cutting 3mm, tungsten carbide coated, cutting 4mm, tungsten carbide coated, cutting 5mm, tungsten carbide coated, cutting 6mm, tungsten carbide coated, cutting 1.2mm, tungsten carbide coated, cutting 0.1mm, tungsten carbide coated, diamond burr points 2min,, diamond burr points 1mm,, diamond burr points 0.8mm, diamond burr points 3mm, diamond burr points 4mm, sphenoid punch., stapes footplate perforator (0.3mm, 0.4mm,0.5mm,0.6mm,), fisch perforator 0.3mm, 0.4mm, 0.5mm, 0.6mm (length-160mm), crurotomy scissors (fisch, prosthesis crimper., fisch hook for piston, measuring plate for stapes (zig), micropick 45 and 90 angled , 0.2mm and 0.4mm (165mm length), measuring rod, crimping forceps., myringotomy knife, grommet applicator, microdrill with motors, hopkins rod wide angle straight forward telescope 0 , enlarged view, diameter 4mm, length 18 cm, autoclavable, fiber optic light transmission incorporated, color code: green., nasal endoscopes (hopkin s ) rod system of 2.7mm, with 0 . 30 .45 . 70 . 90 angles & length 18cm., nasal endoscopes (hopkin s) rod system of 3mm, with 0 . 30 .45 . 70 . 90 angles & length 18cm., nasal endoscopes (hopkin s) rod systemof 4mm with 0 . 30 .45 . 70 . 90 angles & length 18cm, frontal sinus curette. 55 curved, oval, forward cutting , length 19-20cm, nasal sickle knife, pointed, length 19-20 cm., freer elevator, double ended, semi sharp and blunt, length 20cm., antrum curette, oblong, small size, length 19 cm., frontal sinus curette, 90 curved, oval forward cutting length 19 cm., probe double ended, maxillary sinus ostium secker, ball-shaped, cottle elevator double ended, semisharp and blunt graduated, length 20cm, bipolar coagulating forceps, insulated,angular, blunt, fo

Central Government/Public Sector

CTN :41186090

13 Aug, 2025 1.30 Crore

Pilibhit - Uttar Pradesh

Tender For supply of setting up of iot lab at nielit extension pilibhit d d - aiot gate way , sensors pack of 32 , 3d printer , set of general-purpose workshop tools and measuring instruments , working applications , multi-functional industrial robot one time cost , laptops and accessories , platform logins aiot printing and working applications for 3 years , iot lab use material hardware package bunch of individual items , electrical, network and other wirings package

Central Government/Public Sector

CTN :41146686

11 Aug, 2025 NA

Bokaro - Jharkhand

Tender For supply of aerial working platform , application charge annual maintenance contract

CTN :41141279

11 Aug, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of working platform for radial drill machine mw. no 3655 as per blw drg. no. m3655m1366 [ warranty period: 30 months after the date of delivery ]

Platform Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector