Latest platform surface Tenders | Government platform surface Tenders

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

Central Government And Public Sector

CTN :45546635

22 Jun, 2026 NA

Bongaigaon - Assam

Tender For supply of manually towable hand operated scissor table, capacity: 500kg, platform size: 510x 900 mm,scissor minimum height: 380 mm, scissor lift maximum height: 1500mm, no. of scissors: double, hydrauliccylinder: 1 no., platform surface: ms plate, wheel: 2 moveable, 2 fixed (125x 50 mm) make: spi or equivalent [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45515755

01 Jul, 2026 NA

Lakhisarai - Bihar

Tender For district revenue office - short term tender - waterproof pandal non-waterproof pandal ceiling cloth side wall cloth carpet shamiana dari (floor mat) chauki (low platform) fiber chair vip chair sofa set (leatherette) table with cover (iron & wood) table (felt-top) center table (leatherette) small cooler large cooler ceiling fan pedestal fan podium led string lights led bulb (30w) metal halide light mercury light waterproof enclosure led vapor light led board control board/panel board bamboo barricading poles sal wood barricading poles iron barricading stands poles/posts 2- par lights / stage lights drop gate decorative entrance gate (toran) flower decoration banner/poster/flex fabrication and installation construction of passenger sheds, check posts, etc. generator 5 kva (including operator and fuel) generator 7.5 kva (including operator and fuel) generator 10 kva (including operator and fuel) generator 25 kva (including operator and fuel) generator 30 kva (including operator and fuel) generator 40 kva (including operator and fuel) generator 62 kva (including operator and fuel) stage sound system (including speakers/horns and setup) vvip sound system (including truss and lighting) mp3 sound system with microphone (for control room and temple committee) cordless microphone pillow bed sheet temporary urinal temporary bathroom mobile charging board water misting machine videography high-capacity cctv cameras (as required) led tv (12x8) with live feed camera extension board

Central Government / Public Sector

CTN :45548092

06 Jul, 2026 NA

Kondapuram - Andhra Pradesh

Tender For acting for and on behalf of the president of india invites e-tenders against tender no 01-snt-10-2026 closing date/time 06/07/2026 15:00 hrs. bidders will be able to submit their original/revised bids upto closingdate and time only. manual o ers are not allowed against this tender, and any such manual o er received shall beignored.1. nit headername of work(1)'pathakotha cheruvu' station- s&t arrangements in connection withcommon loop facilities for up & down loop lines at plu.(2)'kondapuram'station-s&t arrangements in connection with the provision of new cross over forcommon loop facility to the existing down loop line. (3) 'tiruchanuru' station - s&tarrangements in connection with provision of new trip shed.(4) ontimitta (vnm)station: signalling & telecom arrangements in connection with proposed pqrssiding.bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime06/07/2026 15:00date time of uploadingtender12/06/2026 18:42pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 73698692.36tendering section maintainbidding stylesingle rate for eachschedulebidding unitearnest money (rs.) 1474000.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 22/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a1-supply portion (sor items)13727130.00above/below/par1120.00numbers4710.00 94200.00 at par 94200.00description:- supply of cls post 140mm dia to speci cation irs:s 6-81 rev.3 or latest.(a) 4.5mlong. inspection by rites.2220.00 set6432.00 128640.00 at par 128640.00description:- supply of cls ladder set complete with staging/platform, supports, cast iron ladderbase/shoe. (a) ladder for 4.5m post as per drg. no. sa 23153, s 2033 or latest. inspection byrites.3320.00numbers3476.00 69520.00 at par 69520.00description:- supply of suiface base 140mm dia. cls post as per drg. no. s 2011/m. inspection byrites.4411.00numbers12998.00 142978.00 at par 142978.00description:- supply of metallic (ms) colour light signal unit. (a) 2 aspect complete as per drg..no. sa. 23003/aim (adv.) with latest amendment and speci cation irs: s 26-64 or latest. inspectionby rites.559.00numbers17623.00 158607.00 at par 158607.00description:- supply of metallic (ms) colour light signal unit. (b) 3 aspect complete as per drg..no. sa. 23002/aim (adv.) with latest amendment and speci cation irs: s 26-64 or latest. inspectionby rites.664.00numbers4938.00 19752.00 at par 19752.00description:- supply of o set bracket to suit 140mm dia cls post with two numbers of u bolts andnuts complete. inspection by rites.page 1 of 32run date/time: 12/06/2026 18:43:10guntakal division-s and t/south central rlytender documenttender no: 01-snt-10-2026closing date/time: 06/07/2026 15:00775.00numbers4740.00 23700.00 at par 23700.00description:- supply of calling on signal unit complete with u bolts as per rdso drg. no.sa.24351 (adv.) or latest. inspection by rites.8815.00numbers6083.00 91245.00 at par 91245.00description:- supply of ground type position light shunt signal complete with base, pipe, arrowmark and hoods as per rdso drg. no. sa 23840 or latest. inspection by rites.999.00numbers3502.00 31518.00 at par 31518.00description:- supply of post type position light shunt signal with hoods, arrow mark and o setbracket to suit 90mm sockets (cls) with two numbers of 'u' bolts and nuts complete to x shuntsignal below main stop signal as per rdso drg. no. sa 23840 or latest. inspection by rites.10105.00numbers20490.00 102450.00 at par 102450.00description:- supply of junction type / direction type route indicator as per speci cation irs:s 66-84 amd. 1

corporations/Associations/Others

CTN :45513122

16 Jun, 2026 32.56 Lacs

Nellore - Andhra Pradesh

Tender For 1. providing nmc control room cum reception centre (60'x40') for the programme of rottela panduga at barah shaheed dargah - 2026 in nellore municipal corporation. 2. providing police department control room cum reception centre (60'x36') for the programme of rottela panduga at barah shaheed dargah - 2026 in nellore municipal corporation. 3. providing zink iron sheet shelter for pilgrims at bara shaheed dargah edgah platform for the programme of rottela panduga at barah shaheed dargah - 2026 in nellore municipal corporation. 4. providing zink iron sheet shelter for pilgrims in bara shaheed dargah premises for the programme of rottela panduga at barah shaheed dargah - 2026 in nellore municipal corporation.

corporations/Associations/Others

CTN :45494834

19 Jun, 2026 NA

Mysore - Karnataka

Tender For auction sale of ms scrap,scrap of bg405 cabins,m s turning boring scrap,scrap of c i boring m s turning boring mixed,scrap of c i boring m s turning boring mixed with mud,scrap of plastic fibre items,scrap of rubber items,scrap of condemned unserviceable stainless steel canteen,scrap of engines transmissions of various equipment,scrap of bg405 transmissions,ms iron,scrap of rubber,scarp of used oil soaked leather hand gloves,scrap of condmened nh cnc lathe,scrap of used battery operated platform truck 3 wheeler,scrap of electrical,scrap of protective covers guards,ms scrap,scrap of condemned production equipment parts made of alluminium,m s scrap,scrap of used welding cables,scrap of miscellanious items,scrap of old dead wood,scrap of used empty damaged ms oil grease barrels,scrap of used overhead water tanks,scrap of used empty plastic oil barrels

CTN :45332868

19 Jun, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of small store shelter sys room conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed , aluminium strips 25 x 3 point 00 mm , galvanised iron strip 32 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm coma 3 mm thick with ms frame , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet comma wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma nuts and bolts are in hexagon blck steel , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms platform , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :45468350

29 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of 110mm dia , pvc pipe 100mm bore 20ft long , pvc swr 110 mm dia pipe with three socket , stainless steel storage racks , stainless steel serving platform , stainless steel vegetable cutting table , preparation table , deep freezer of 200 ltr capacity , grill oblique cage , chula std size 12 x 44 x 10 inch , dining table of 04 person seating , dining chair with a stainless steel structure , synthetic enamal paint dark brown , synthetic enamal paint og , thinner , painting brush 50mm , painting brush 100mm , painting brush 125 mm , cement base paint , gi plate 600mm x 600mmx 6mm thick , ci cover of size 290 x 290 x 6 mm , gi pipe 40 mm dia medium grade , gi strip of size 25 x4 mm , salt , ms funnel with wire mesh , gi pipe 20mm dia med grade isi marked , gi reducer 40 x 20 mm isi marked , ms rod 6 mm dia 2 ft long , charcoal dust , 5 mm dia 30 mm long gi bolt with nut , lightening rod , gi pipe 100 mm dia 2m long medium grade with base plate , back fill compound , ci man hole cover of size 29 cm x 29 cm with handles complete , aluminium strip 25x3 mm , gi strip 32 x 5 mm , iron spikes 18 inch long , gi nipple 20 mm dia and 10 cm long is 1879 , lightning terminal coppper with 5 nos prong 15 cm long complete , ms clamp 40x2mm with nut and bolt complete , gi wire 12 guage confirming to is 2062 oblique 1991 , gi pipe 40 mm dia medium grade isi marked , gi reducer socket 40 mm x 20 mm for connecting prong to pipe , vitrified floor coloured tiles of size 600 x 600 x 10 mm thick , anti-skid coloured floor tiles of size 300x300x7 to 8mm for steps , perforated type gypsum board false ceiling panel of size 595 x 595 mm 8 mm thick , kota stone flooring 25 mm thick achine cut mirror polished of minimum size 280 mm x 280 mm , mild steel chromium plated 25 mm dia and 3mm thickness drapery rod of approved make coloured of size 1.20 m long with end caps , mild steel chromium plated 25 mm dia and 3mm thickness drapery rod of approved make coloured of size 1 point 50 m long with end caps , integral water proofing compound , white or coloured cement to match the floor finishes surface , fire extingusher one kg capacity

State Government

CTN :45462091

29 Jun, 2026 NA

Godhra - Gujarat

Tender For supplying and stacking various type of building, road &other construction materials, at various places of taluka panchayat,godhra under mgnrega (annual unit rate) - cement isi mark 53grade, etc.opc, white cement, tmt bars fe-415, hysd steel bars, r.c.c. np3 pipe 900m.m. dia, r.c.c. np3 pipe 600m.m. dia, r.c.c. np3 pipe 300m.m. dia, crushed stone aggrigate for hard qulity 10 to 20 mm, crushed stone aggrigate for hard qulity 40 mm, crushed stone aggrigate for hard qulity 40 to 63 mm, hand broken metal 25-90m.m., rubble local, coarse sand, quarry dust, bricks- convention size, binding wire, kota stone 25m.m. thick, glaze tiles, vitrified granite tiles 8 mm to 10 mm tick 24 x 24 size, pvc water tank 1000 ltr, galvenise iron sheet 0.8 tick class 3, iron angle and pipe, pevar block m 200 grade 60 mm tick, hire charge for mixer machine rent, hire charge for water tanker rent 6kl capacity, murram (binding material), road roller hire charges 8 tone, wash basin 550*400m.m., colour distamper primer, marble slab/platform 25m.m. thick double polished, galvanised mild steel tube medium grade 20m.m., galvanised mild steel tube medium grade 32m.m., galvanised mild steel tube medium grade 40m.m., indian type wc pan size 580x 400m.m., cast iron nahni trap, flush cock, chromium plated brass /bib tap 15m.m., sw gully trap 100 x 100 mm size, kitchen sink 600m.m.*450m.m.*150m.m. (steel), pvc pipe 110m.m.dia 6kg per/sqm, hire charge for vibrator surface, hire charge for vibrator needle, asbestos.cement sheet, centaring(scalffoding), iron door, iron window, oil paint, uncost material carting trip, p or s trap 100 m.m. dia, electrict light fitting material

Central Government/Public Sector

CTN :45473224

15 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of weight machine having checkers iron sheet platform with electric display system stand size platform (600 mm x 600 mm) (remark - delivery location- rpf canteen near nadra bus stand chola road , railway colony , bhopal mp -462001) [ warranty period: 36 months after the date of delivery ] ]

Platform Surface Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors