Get complete information related to latest Platforms Ladders Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Platforms Ladders Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Platforms Ladders Tenders.
Tender For supply of heavy racks main unit size 3.3 mtr height x 2.1 mtr length x 0.9 mtr depth approx g 2 loading levels , heavy racks main unit size 3.3 mtr height x 2.7 mtr length x 0.9 mtr depth approx g 2 loading levels , heavy racks main unit size 3.3 mtr height x 3 mtr length x 0.9 mtr depth approx g 2 loading levels , industrial quality and duty made from ms tube ladder , installation charges
Tender For providing and fixing of children play equipment at park near house no.3722 sector -46,chandigarh under m.p.lads (work no.36 18 ls) - m.a.p.s (jumbo 3x1)sr. no. description quantity1 standard see saw 12 double swing 13 wave slide 5 ht. 1area : 4m x 4msafe area : 5m x 5m(jumbo 3 x1) set consist of :standard see saw:this item provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush typedouble swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide:the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., wide slide ssarea : 3m x 1.2msafe play area : 4 m x 2.2 mplatform height : 1.2 mthe wide slide on of the attractive slides of its kind. the chute is made of 14 swg ss/gi sheet. the stainless steel used is of 304 grades. the chute is supported by 40x5 ms angles. this chute is attached to the platform made from ss/g sheet. the platform is supported by 40 nb gi pipe. the ladder is made using 20 nb and 25 nb gi pipes. the steps for the ladder are of 20 nb gi pipes. the sliding height is 2.4m. the landing support used is made up of 25 nb pipe. the handrail of the chute is made up of 20nb power coated gi pipe. the slide is innovative wide slide on which at a time 3 kids can slide., swinging loop rung rec. age : 5-14 yrs.the area : 3.2m x 0.9 msafe play area : 4.2m x 1.9 mthis is another of item that provides hanging as well as swinging experience to the children . the frame is fabricated out using 40 nb and 25 nb powder gi pipes. there are 09 triangles loops of 15 nb which are attached to the top pipe of the frame using s hook. the ladder used is designed to the side support pipe itself.
Tender For fabrication and erection of ms ladder to clariffilocculator at municipal water treatment plant under municipal general funds 2024-25 in sangaredy municipality
Tender For provision of supply and rewiring of electrical items in different mcc and mrf centres of puri municipality, puri - supply and fixing of different type of fitting with lamps/f of 20w 4 led fitting surface led light fitting (make-havels/philips/ bajaj/ crompton/ helonix) / tube light fittings, s/f of 45w led street light fitting (make-havels/ philips/ bajaj/ crompton/helonix), s/f of g.i. street light bracket with m.s. clamp, supply and fixing of fan (make-usha/orient/v-guard/khaitan/havells/crompton/almonard/v-guard)s/f of 1200mm high speed ceiling fan, heavy duty,durable, copper winding,aluminium blade(isi mark)crompton grave/ khaitan/orient/ polycab/ bajaj/v-guard, wall mounted fan 400mm, pedestal fan 18" size, 2.5 mf celling fan capacitor, supply of pvc/xlpe aluminium armored cables isi marked.(make- glowstar/ polycab/nicco/kei/rhino as per letter no-309 19.1.2011 of seec (r&b) odisha)10sq.mm 4core, supply and fixing of 9/12 watt led lamp (philips/ havells/ anchorbajaj), s/f of pvc pipe for net wiring, 5amp switch , 5amp socket, 15amp switch, 15amp socket., a.b holder, supply and drawing of following size pvc insulated single core multistrand copper conductor in existing surface/recessed/steel / conduit as required.1 x 1.5sqmm, s/f 1.5 mm 2 core al service wire, a shape al ladder 19 mtr height make sky master, 10amp motor starter with volt meter & one indicator, s/f 6*4 inch pvc gangbox with required switch/socket, s/f of extension board 6a switch - socket & 2 pin with 1mm cable 10 mtr.
Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be
Tender For supply of complete stores for living shelter 16 men fems - main columns will be made of 100m x 100m x 4mm square section of 3 length , wind breaker columns c1 will be made of 80mmx40x3 point 2 mm rhs 2 x 2 point 70 mtr and 2x2 point 40 mtr , purlin should be made of rhs 80 x 40 x 2 point 9mm of length 2 point 60 mtr and 2 nos purlin of size 80x40x2 point 9mm of length 1 point 5 mtr for wind braker , truss made of rhs main member of 80x40x2 point 9mm , runner of length 2 point 53 mtr and 04 nos gable side runner of length 2 point 40 mtr made of shs 40x40x3 point 2mm , pedestal of height zero point 30 mtr made of shs 150mmx150mmx6mm , wind breaker a cabin of size 1500mm x 1500mm made of 4 nos ms square tube 80mmx40mmx3.2mm and hight 02 nos 2 point 70 and 2 nos 2 point 40 ht with 60mm thick puf panel , double bunks ms of size 1930mm x 930 x 1840 at leg side and 910mm hight with 02 nos mattress with each bunk , ladder shall be provided on kg side in between long rial connecting lower bunk and upper bank , mattress smart ortho mattress ultimate back pain relief of size 1890mm x 800mm , all nuts and bolts used for joining the structural members shall be of high quality and varieties of bolts as per specification , sun shade for door and window openings will be provided with 450mm wide sun shade made out of same material as of roof sheets matching with roof colour as per technical specification documents , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners as per specification , lightning conductor made of copper tube 150cm long x 25 mm dia with five copper prongs of length 15cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building provided using 3mm dia gi earth wire connecting to main board to gi earth plate of size 60cm x60cm 6mm thick , lower outer frame rhs 80mm x 40mm 2.9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower gable outer frame rhs 80mm x 40mm x 2 point 9mm thick and having two through holes at each end to enable suitable fitting of u clamp on the bushing system at the columns , lower cross tie beam rhs 66x33x2 point 9mm has to be fitted with the columns in the u channel fitted at the lower side of the columns , floor panel 6 mm thick vinyl sheet of approved colour over 18mm thick bwp oblique bwr isi ply board shall be shall be provided for floor , pedestals will be made of 150x150x6mm sections of height 300mm with base plate of size 400x400x 12mm , foundation for all pedestals will be of pcc 1 2 4 type b1 20mm graded stone aggregate of size 450x450x900mm over the sub base 100mm thick pcc 1 4 8 using 40mm graded stone aggregate , field heating device , sleeves for field heating device as per specification , peg sets will be provided stainless steel premium fesue dual edge 8 pin cloth hanger bathroom wall door hooks , curtain rods for all openings of doors and windows of shelter will be provided with drapery rods made of 25mm dia , looking mirror of size zero point 5 x 1 point 65mm with wooden frame , iron foot scrapper for size 600mm x 450mm will be provided for entrance doors , iron foot mat for size 1200mmx900mm comprising of internal wire mesh of gauge 18 swg will be provided for entrance doors , all electric items shall be isi marked as per specification , stainless steel shoe rack and shoe stand and multipurpose stand of 31x24 inch , swing open to top dust bin stainless steel 12x28 inch 50l , supply only transitional end table with open shelvees size 24x22x18 inch , stainless steel heavy duty double pole 3 lalyer foldable and moveable prince jumbo cloth drying stand brc 786 ss grey , ordinary portland cement grade 43 and is 12269 to 1990 and packed in 50 kgs hdpe bags , coarse sand , stone aggregate shall be crushed stone 20mm graded conforming to is 383 1970 , stone aggregate shall be
Tender For supply of pvc swr bend with oval access door 110mm dia , pvc swr bend plain 110mm dia , pvc swr tee 110mm dia , pvc short connection 300 oblique 450mm long , each shelter should have 01 nos of 500 ltrs hdpe water tanks triple layer , ppr gate valve 32mm outer dia , ppr tank connector inner dia 32 mm , ppr elbow 32mm dia , ppr tee 32mm dia , sealing thread , ppr tee reducer 15x 25 mm inner dia , ppr pipe 20mm outer dia with complete fitting , ppr pipe 32mm outer dia with complete fitting , ppr union 32mm dia , ppr socket 32mm dia , ppr elbow 20mm , ppr socket 20mm , ppr reducer socket 32mm x 20mm , cp bib cock long body chromium plated 15 mm dia , cp pillar tap 15 mm bore , cp stock cock of 15mm bore , vitreous china wash hand basin and white and flat back and size 580 x 400mm including cp waste coupling and pvc waste pipe and complete fixing , bathroom cabinet with looking mirror for toiletry items of size 300mm x 450mm with arrangements to fix the same with wall shall be provided , frp iwc of standard size in three cabins with s oblique p trap shall be provided with flushing cistern , ppr wall clamp dia 25mm , 100mm dia stainless steel grating , ss soap dish holder , silicon tube 200gm , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , fd water heating eqpt solar oblique k oil based with 500 ltr tank capacity and made of 2 mm thick stainless steel sheet grade 304 and ms angle and frame legs of size 40 x 40 x 5 mm thick , cgi sheet 3000mm x 900mm x zero point 60mmconfirming to is 277 , gi pipe 50mm dia and 2400 long , barbed wire 14 swg and 2mm thick , laip 45 x 45 x 6mm and 1830mm long , silicon gun for applying silicon tube , drilling machine portable , mason thread nylon 3mm dia x 100 mtr long roll , adjustable spanner 10 inch , screw driver , self supporting aluminium step ladder 6 feet height , trawal brick 250mm , shovel hand gs 12 feet 1 point 6 kg with fibre handle , measuring tape 5mtr retractable grade ai 16 , hand gloves rubber , 02 x mason to be deployed for 01 month to execute the masonry wks required in the job for timely exec of the wk , 01 x plumber to be deployed for 01 month to execute the plumbing wks required in the job for timely exec of the wk , 01 x electrician to be deployed for 01 month to execute the electrical wks required in the job for timely exec of the wk
Tender For supply of fiber glass heavy duty wall support sway proof extension ladder of 36 feet extend able height having side runners of fiber glass section, fiber glass antiskid steps of 32 mm wide fluted antisk id round pipe at 300 mm center to center, aluminium casted gravity type locking mechanism, heavy duty g uides, pp rope, pulley and aluminium casted swivel type shoes with thick antiskid rubber treads. extra ms r ubber coated v pole support similar to make sumer frp 159. total section length 6+6 mtr = 12 mtr. make / brand : shashank aluminium model no safrp 141 or similar [ warranty period: 30 months after the d ate of delivery ]
Tender For supply of ladder trolley complete set generally confirming to rdso specification no. tm/sm/465 dated 03.02.2014 (rev 01 of2020) enclosed with following minor deviations. 1. each trolley set comprises of (1) wheel and axle 2 nos. (2) detachable frame- 1 no. and foldable ms ladder-1 no. 2. the wheel and axle set , frame for the trolley and the ladder for the trolley shall be as per the drawing enclosed. 3.the materials especially steel used for fabrication of wheel and axle should confirm to relevant standards wherever appli cable. only isi marked, branded ms pipe should be used for fabrication of ladder. the finished ladder shoul d be given one coat of anti-corrosive painting 4.seating arrangements, any arrangement for tool box are no t required in the trolley though mentioned in the rdso specification. 5. where there is any minor deviation in the dimensions between the drawing and the rdso specification is noticed if any, the dimensions in the enclosed drawing shall be adopted. 6. suitable insulating pad or similar insulating material should be provi ded in the axle such that the two wheels of the axle are not electrically shorted. 7. inspection will be carried out by consignee either at firm's premises or after receipt of the material. tenderers shall specifically note that the trolley requires to be field tested and any minor alterations/modification required for the same sho uld be carried out at the field by firms representatives in co-ordination with consignees after effecting the s upply. encl: 1. rdso specification no.tm/sm/465dt.03.02.2014 (rev 01 of 2020) 2. drawing no. m/trd/sk/ 589. [ warranty period: 30 months after the date of delivery ]
Tender For supply of complete store and contruction material for living frp hut - cement bag 43 grade opc in polythene bags weighing 50 kgs , sand coarse , crushed stone aggregate 40mm graded , crushed stone aggregate 20mm graded , rr stone , hard core of broken stone aggregate of size 45 to 63 mm , foundation bolts ms galvanised alongwith nuts and washer 450mm long and 12mm dia , foundation brackets ms 210 x 150 x 100mm , bolt ms galvanised m10 x 50mm with nuts and double washer 2mm , bolt ms galvanised m10 x 120mm with nuts and double washer 2mm , bolt ms galvanised m10 x 100mm with nuts and double washer 2mm , bolt ms galvanised m10 x 75mm with nuts and double washer 2mm , bolt ms galvanised m10 x 125mm with nuts and double washer 2mm , double bunk of size 1800mm x 900mm , mattress 1800mm x 900mm with two layers each 50mm thick , fire extinguisher 06 kgs abc dry powder stored pressure type , automatic ignition kero room heater fuel tank capacity 18 ltr with fuel indication gauge , large steel almirah half hanging of size 1985 x 920 x 485mm 1 point 0 mm steel body , water dispenser hot cold and normal water 20 ltr capacity with jar of 20 ltr , detachable rack 400mm x 125mm , tarpaulin plastic film water proof cover size 30 x 30 colour og , solar hand held lantern light , lightning conductor and earthing made of copper tube150cm x 25mm dia with five copper prongs of length 15cm , fd water heating eqpt solar or k oil based with 500 ltr tank capacity , solar street light 25w including pole having length 5 mtr long , complete set of repair kit packed in one steel box with lock and key , 20w led tube light fitting 230v , bulk head fitting with 9 watt led bulb , moduar switch socket combine 15 amp , moduar switch socket combine 5 amp , pvc casing and capping of size 25 mm , pvc casing and capping of size 25 mm tee , pvc casing and capping of size 25 mm elbow , pvc casing and capping of size 25 mm common for joints , wire single core copper conductor 1 point 5sqmm , star headed screws 1 inch , mcb 10 32 amp sp , elect wire two core copper conductor 6 sqmm , elect wire 2 point 5 core copper conductor , ceiling rose 2 to 3 terminals , change over switch 32 amp , pvc pipe 110 mm dia x 20 long , cgi sheet 3000mm x 900mm x 22 , gi pipe 50mm dia and 2400mm , frp iwc with foot rest and s or p trap , pvc bend 110 mm dia , pvc tee 110 mm dia , pvc p trap 110mm , pvc socket 100mm dia , ppr gate valve 32mm outer dia , ppr tank connector inner dia 32 mm , ppr elbow 32mm dia , ppr tee 32mm dia , sealing thread , ppr tee reducer 15x 25 mm inner dia , ppr pipe pn 16 sdr 7 point 4 and 3 layer 20mm , ppr pipe pn 16 sdr 7 point 4 and 3 layer 32 mm dia , ppr union 32mm dia , ppr socket 32mm dia , ppr elbow 20mm , ppr socket 20mm , ppr reducer socket 32mm x 20mm , long body bib cock chromium plated 15mm dia , ppr wall clamp dia 25mm , hdpe pvc water tank 1000ltrs , pre fabricated tank staging ms angle iron frame of size 1 point 50 x 1 point 50 x 2 point 50 mtr , silicon gun machine for applying silicon tube with isi mark , silicon tube 200gm , reinforced nyloguard 9 point 00 x 9 point 00 mtr , adhesive sr 998 , drilling machine , mason thread nylon 3mm dia x 100 mtr long roll , adjustable spanner 10 , screw driver make , screw driving machine make , self supporting aluminium step ladder 6 height , trawal brick 250mm , plier side cutting , phawarh 915mm with wooden handle , shovel hand gs 12 1 point 6 kg with fibre handle , measuring tape 5mtr retractable