Latest plb pipe trenching Tenders | Government plb pipe trenching Tenders

Central Government/Public Sector

CTN :45302387

28 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of others - abandoned old buildings/sheds/structures of mg workshop- 04 units, unit no. 19 - small shed near dome, unit no. 22 - record room, unit no. 23 - dwm office, unit no. 24 - machine and generator room location - mg workshop bvp. this lot of abandoned condemned buildings consisting of released door with chokhat wooden u/s - 3 nos, released window with chokhat wooden u/s - 41 nos, released wood - 1.296 cum, released ac sheet approx. - 433 sqm, released steel door u/s - 60 kg, released manglore tiles approx. - 620 sqm, released rails from structures u/s [41.25.50r & other miscellaneous type of rail off sizes] - 896 kg, ms scrap. i.e tie bar, flat, angle, fish plate, nut, bolt, ms sheet door, steel bar, gi sheet, xpm jalli etc. off size approx - 6726.7 kg, released masonary /rubble approx - 290.9 cum. custodian - sse (w) bvp, mode of delivery by lot, loading by purchaser. note: 1. dismantling is permitted up to ground level only. digging below ground level is not permitted. due care is to be taken by the bidder/purchaser to avoid unwanted mishapes at work spots. they should ensure to keep a safety banner around the work spot till it is completed since the locations are surrounded with working offices. 2. after removing/ clearing the rcc/ brick machonary rubbish from the spot only, the delivery of wood/ iron material will be affected. 3. contractor should take care of any cable while dismantling and digging. damage to railways shall be recovered as per extent rules. 4. part delivery/ part handing over is not allowed. 5. any ng/mg/bg pway rail lines or pway scrap with or without attachments lying under or beneath the building/sheds/structures or surrounding area are not deliverable. 6. any non-ferrous material of high value if found from the lot, it needs to be submitted by the purchaser to the custodian. 7. power of attorney along with aadhar card/identity proof/address proof must be submitted to this office for verification of authorised person by bidder before handing over (if any.) fdp 50 days.

CTN :45318277

09 Jun, 2026 50.00 Lacs

Godhra - Gujarat

Tender For supply of cooling pad 2 feet x 4 feet with fitting , cooling pad frame alluminium 2 feet x 4 feet , water circulation pipe for pad frame , repairing fogger system with fogger and material , green net , insect net , gi profile with installation , zigzag spring with installation 8 mm , fogger with lpd with installation , uv stabilized film , uv stabillized film greennet insect net installation labour , exhaust fan with installation , 15 w solar street ligh system set with installation , 15 w solar street light repering work , motor repairing 1.5hp , 2 hp three phase exhaust fan motor repairing , 2 hp three phase exhaust fan new motor with installation , gi pipe 1.5inch 2 mm thikness with fitting , gi pipe 2inch 2 mm thikness with fitting , repairing of panelboard , 2 core 4 sq cable with fitting , 3 core 4 sq cable with fitting , 4 core 4 sq cable with fitting , fiber or pvc gutter with fitting , temperature controller with fitting , humidity display with fitting , fogging auto controller with fitting , bedsheet 100 micron , fabrication work , electric work , plumbing work upvc pipe and fitting 50 mm , plumbing work pvc pipe and fitting 63 , micro irrigation facility for plantation , micro irrigation facility for hitech nursery , 16 mm lateral with installation , 16 mm inline with installation , 8 lph dripper with fitting , inverted modular sprinkler or fogger sytemt for nursery , installation of foundation pipe pole digging and civil material without pole , hp solar controllar , hp solar motor pump , 545 watt solar panel with fitting , 50 mm10 kg isi hdpe pipe , remove damage uvsheet greennet insecti net profile

State Government

CTN :45293777

29 May, 2026 3.54 Lacs

Multi City - Telangana

Tender For procurement of tools and equipment for lascars/helpers towards operation and maintenance activities for irrigation sub division no.1, nizamsagar - supply and transportation of 1 hp single phase self priming mono block ip44 motor pumpset. makes: texmo / cri / ksb / aryenvarsha / lubi / falcon , supply and transportation of 5 hp three phase mono block ip44 motor pumpset. makes: flowell / waterman/ ellen / narayani / sai varsha / sterling / duke / samudra / ajantha , supply of 13 mm fibra fiberglass measuring tape - 30m/100ft with unbreakable abs case, durable curved mechanism handle & steel end hooks, make: freeman as directed by engineer-in charge , supply of 2.00 hp four stroke straight shaft brush grass cutters with 2-teeth blade (14 inches) for cutting, which is 360° inclinable. ideal for tough, sloping, and rugged terrains. make:-honda, agriplus, neptune, green leaf as , supply of 4 sq.mm 3 core pvc / xlpe insulated sheathed multi core bright annealed bare copper conductor heavy duty industrial cables for voltage grade upto 1100 volts as per is: 694:2010 including all transportation charges etc complete. , supply of axe with wooden handle as directed by engineer-in charge , supply of chain saw 22"(petrol) for tree cutting with 58cc powered as directed by engineer-in charge , supply of chains for chain saw machine as directed by engineer in charge , supply of electric shock proof hand gloves as directed by engineer-in-charge , supply of gumboots with steel toe isi mark for men as directed by engineer-in-charge , supply of hammer as directed by engineer-in-charge , supply of hand saw with wooden handle(iron prunning curved saw) for grass, wood, tress cutting as directed by engineer-in charge , supply of heavy duty steel tiller pitchfork with handle as directed by engineer-in-charge , supply of hoe tool (favda) for digging heavy duty as directed by engineer-in-charge , supply of iron digging bar/crow bars as directed by engineer-in charge , supply of nylon rope of 20mm diameter 60 mts in length as directed by engineer-in-charge , supply of plastic multipurpose gamelas (43.8 cm x 39.2 cm x 13.2 cm) as directed by engineer-in charge , supply of rechargeable aluminium body led torch with 120-volt ac/dc charger long range as directed by engineer-in charge , supply of saddle / clamps suitable for fixing 4 to 10 sqmm 2 core cable. , supply of safety helmet hard hat steeplejack climbing work construction worker adjustable headband 2 side venting design cushioning as directed by engineer-in-charge , supply of sickle with wooden handle for weed cutting as directed by engineer-in charge , supply of sluice operating handles as directed by engineer-in-charge , supply of taparia combination spanner set css25 (25 pieces) as directed by engineer-in charge , supply of tool box & screw driver kit as directed by engineer-in-charge , supply of waterproof standard length, high quality polyester fabric double coating reversible rain coat with hood & inner mobile pocket. set of top and bottom as directed by engineer-in charge

CTN :45308227

31 May, 2026 3.50 Lacs

Chittorgarh - Rajasthan

Tender For 01 - digging of pits for plantation work at various places in chittorgarh city

CTN :45309428

01 Jun, 2026 3.50 Lacs

Chittorgarh - Rajasthan

Tender For 01 - digging of pits for plantation work at various places in chittorgarh city

CTN :45301518

09 Jun, 2026 3.00 Lacs

Satna - Madhya Pradesh

Tender For work of wire mesh security, precast pillars, and digging pits for tree plantation

Central Government/Public Sector

CTN :45228046

26 May, 2026 NA

Multi City - Chhattisgarh

Tender For scope of work (sow) as mentioned in tender and schedule of work( 19 )items as given below ,[1] disman,floor plate 100.000 ea,[2] disman,damaged pitch chain assy,6in 1000.000 ft,[3] remvng,swarf frm chain head&tail end 12.000 to,[4] remvng,muck after digging frm entire pit 450.000 ft3,[5] disman,damaged track angle etc of chain 1000.000 ft,[6] brkg,concrete of damaged base bolt 4.000 ft3,[7] replaced.,damaged fdn bolts 55.000 ea,[8] concreting 4.000 ft3,[9] replcg,damaged support str 3.500 to,[10] modn,track angle 1000.000 ft,[11] ern,entire chain length 500.000 ft,[12] assyg,chain,lg20 500.000 ft,[13] svcg,driving&non-driving assy 4.000 ea,[14] svcg,drive g/box assy 1.000 ea,[15] replcg,dischrg&entry chute 2.000 to,[16] mkg,endless chain 1.000 set,[17] wldg,ern,big&small straps 100.000 ea,[18] svcg,conv side guard chain assy,8 week 180.000 ea,[19] streng,headend drive str,wheel main conv 1.500 to

State Government

CTN :45233645

29 May, 2026 9.67 Lacs

Jummu - Jammu And Kashmir

Tender For digging of 21500 nos pits having size 1.5ft x 1.5ft x 1.5ft of 4 to 5 ft spacing including mechanical and manual work. placing and planting plants in the pits along with all fitting and packing material including carriage of plants and filling mate

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement