Latest plinth repair Tenders | Government plinth repair Tenders

State Government

CTN :45533108

23 Jun, 2026 1.87 Lacs

Jhajjar - Haryana

Tender For job no.1212/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation cast iron bench in prithviraj chauhan park in sector-6, at u/e jhajjar and all other works contingent thereto. (re-invited) - 26.58.3 supply and installation of garden bench3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 stripsof m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

State Government

CTN :45533116

23 Jun, 2026 1.87 Lacs

Jhajjar - Haryana

Tender For job no.1213/2026 (hew) work of providing and fixing and installation open gym equipments and supply and installation cast iron bench in swami omanand smriti van park in sector-6 at u/e jhajjar and all other works contingent thereto. (re-invited) - 26.58.3 supply and installation of garden bench3 cast iron bench of 1800 mm length, 900 mm width, 450 mm seating height, sides made of cast iron. seat and back shall be made of 10 stripsof m.s. pipes 63 mm x 25 mm of 14 gauge with one m.s. flat 25 x 10 mm welded at the centre, below and back of the seat and back rest. spray painted with approved brand paint. fixed by grouting with 1:2:4 cement concrete (minimum weight of each bench 105 kg). all materials required to be as per bis specifications., app. item double cross trainer main pipe 114 mm od & 3.75 mm thickness m/s round pipe handles made of 38mm x31 mm m/s round pipe with best quality rubber handle for hand grip working with rubber seal bearing system and foot rest main pipe for 60 x 40 mm m/s flat pipe size of foot rest 5.5"x12" with base plastic cover all alloy cover with ss cover all m/s pipe best quality powder coating., app. item double leg press main round pipe 114 mm od & 3.75 mm thickness m/s round pipe seat made of m/s sheet 16gauge size of seat is 12"x12" fixed on 48 od round pipe smoothly working with rubber bearing system all alloy covered with s.s cover plastic base cover and best quality powder coating., app. item shoulder bilder main pipe 114 mm od & 3. 75mm thickness 17" round wheel made of 31 mm round pipe 25 mm round pipe with bearing system and s.s nut cover with plastic handle and u bend join with main 114 mm pipe for steering wheel is 48 mm od round pipe all alloy cover withs s cover best quality plastic handle on wheels &base fixed with nut bolt 8 mm m/s plate with plastic cover with best quality powder coating, app. item double chest press made of 114 mm od & 3.75mm thickness 38 mm round pipe 48 mm round pipe soxs0 mm sq pipe complete operating with bearing system with rubber seal bearing all alloy are covered the s.s covers & best quality rubber handles for grip and smoothly working. plastic base cover and best quality powder coating

CTN :45536897

22 Jun, 2026 20.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of site clearance and amp earthwork is 1200 , kero heater , pcc is456 , rcc m20 footing and column and slab , reinforcement steel fe500 , brickwork 230mm is1077 and flooring anti skid , internal plaster 12mm , doors flush and windows alluminum and glass , electrical led and wiring , plumbing and sanitary , ceiling gypsum vip , painting exterior and interior external lighting and poles , water supply tank and pump , transportation and logistics remote area , contingencies and solar panel 5kva and invertor and battery 5kva , generator 5 kva electrical led and wiring is 732 , mirror 5 h 2w ft and bench 5 h 2w ft , chair plastic with arm , toilet sheet western with exhaust fan and water faucet and hand jet assy , electric fitting work , changing room 6 by 6 by 10 ft and bathroom 6 by 6 by 10 f , multipurpose hall structure , chair vip sofa and centre table , podium and tt table and carrom set , yoga mats fire extinguisher , 86 inch interactive pannel , drainage and cement road work tin shed wk on viewer seating iron poles and tin sheet hooks screw and iron channel , ground civil work , excavation work

CTN :45344779

18 Jun, 2026 62.00 Lacs

Bareilly - Uttar Pradesh

Tender For corrigendum : :for the work of preventive maintenance of d/t’s of different capacity for strengthening( dt’s plinth repair, fencing & erathing) of electrification system in the diffirent area’s of ae-i, bareilly under lt & 11 kv vertical, bareilly , under business plan-2026-27 bareilly

CTN :45344780

18 Jun, 2026 57.00 Lacs

Bareilly - Uttar Pradesh

Tender For corrigendum : :for the work of preventive maintenance of d/t’s of different capacity for strengthening( dt’s plinth repair, fencing & erathing) of electrification system in the diffirent area’s of ae-ii/iii/iv, bareilly under lt & 11 kv vertical, bareilly , under business plan-2026-27 bareilly.

Corporations/Associations/Others

CTN :45532288

30 Jun, 2026 15.30 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements ,eb board, play materials and name board works in rajagopal nagar park at ward no.51 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page no.105)

Corporations/Associations/Others

CTN :45532318

30 Jun, 2026 19.50 Lacs

Kanchipuram - Tamil Nadu

Tender For repair and maintenance work of foot path and light arrangements,eb board,play materials and name board works in tnhb p-iii park at ward no.33 zone -4 in tcmc - eangaging of man power for cleaning weeds and bushes at lawn areas cutting plants and grass including all labour charges etc complete, gardener 5 days 6 nos, mazdoor ist class, engaging of ac electric grass cutter on hire basis including hire charges transport charges and all labour charges etc complete, supply and fixing of childerns play materials including cost and conveyance and fixing and proper alingenement charges etc complete, slider, 2 seater swing, 4 seater see saw, supplying and filling in foundation and basement with river sand in play area in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification., supply and fixing of light pole 4 metre length single bracket pole with base plate (250 x 250 x 6mm)76.10mm od x 3.65mm thick x 4000mm length etc.,completed, supply and fixing of 30w led street light fitting with led on out door fittings including cost and conveyance and fixing charges etc complete, supply and fixing of synthetic moulded compound box for street light with 16 a mcb and connecterincluding cost and conveyance and fixing charges etc complete box-735+16 a mcb sp and neutral -382, supply and fixing of 4 sqmm pvc unsheathed copper cable including cost and conveyance and fixing charges etc complete , supply and laying of 2 x 10 sq.mm pvc armoured ltug cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good sd 194, centering and shuttering charges for all pcc and rcc works using ms steel moulds and soffits strutting with casurina props 10-13 cm dia including cost and conveyance of all materials and including all labour charges etc complete, plain cement concrete 1;2;4 mix using 20 mm hbg iss metal including cost and conveyance of all materials and including all labour charges etc complete, supply and filling of on quarry rubbish 15 cm thick on each layer including cost and conveyance and all labour charges for filling and consolidation charges etc complete, cement concrete 1:5:10 (one cement, five crushed stone sand and ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard speci cation and as directed by the departmental of cers. -mixing by manual means, paving the oor with pre-polished concrete anti-skid tiles (required shape and design) of 20mm thick of approved quality and colour laid in accordance with is 1443 over a cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required cement slurry and mortar plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 kg. / sq.m., curing, etc., complete complying with standard speci cation and as directed by the departmental of cers. (the make and brand of the tiles should be got approved by executive engineer before use on works), supply and fixing of m.s grills with doors and windows with one coat of red oxide with primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification., supply and fixing of stone bench including cost and conveyance and fixing and proper alingenement charges etc complete, supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(twad sor 2025-26 unicode wd-m1471 clause 18.0 page n

CTN :45516488

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45516720

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

CTN :45517078

15 Jun, 2026 NA

Gir Somnath - Gujarat

Tender For supply of 1. cement isi mark, 1 bag, 2. good quality sand and local sand, 12 tons or 1 tractor load, 3. stone/brick, 1 piece, 4. isi mark 20 mm, 1 kg, 5. iron scrap 40 mm, 1 ton, 6. notty wood (for door frame), 1 cubic meter, 7. office chair, plastic chair and table, 1 piece, 8. for water work, boring, fitting, sealing with 1 foot, 9. ied light pole or fitting with voltage proof, 1 piece, 10. 4 hp isi mark submersible pump and electric motor, 1 piece, 11. all types of pipes, pvc pipes, 1 meter, 12. 60 to 80 mm power blocks, 1 cubic meter, 13. water tank, isi mark plastic, 1 liter, 14. cement bench as per size, 1 piece, 15. white cement, 1 bag, 16. crushed stone and grit, 1 tractor load, 17. gutter line excavation and fitting, 1 meter, 18. well excavation, 1 piece, 19. water valve as per size, 1 piece, 20. dustbin small/large, 1 piece, 21. galvanized/cement sheet, 1 piece, 22. material for yajna mandap (flooring), 23. isi, electrical all materials, 24. labor for all works, 25. isi, computer set, 1 piece.

Plinth Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Corporations/Associations/Others

Corporations/Associations/Others