Latest plug screw Tenders | Government plug screw Tenders

Central Government/Public Sector

CTN :43246510

09 Jan, 2026 NA

Ajmer - Rajasthan

Tender For supply of 1. hex head screw m10x30-8.8-as per iso-4017,is-1364 part-2, zinc flake coating(geomet 321 or equivalent) with top coat, without any hexavalent chromium without any integrated or separately added lubricant, minimum salt spray test life of 1000 hours shall be ensured, make-deepak fasteners, sundaram fasteners, lps bossard, as per icf drg. no. 88902008 alt b item no. 5.2. hex head cap screw m8x25-8.8- as per iso-4762,is 2269 ,zinc flake coating(geomet 321 or equivalent) with top coat, without any hexavalent chromium without any integrated or separately added lubricant, minimum salt spray test life of 1000 hours shall be ensured, make-deepak fasteners, sundaram fasteners, lps bossard, as per icf drg. no. 88902006 alt d item no. 4.3. hex head plug screw m20x1.5- as per din910, zinc flake coating(geomet 321 or equivalent) with top coat, without any hexavalent chromium without any integrated or sperately added lubricant, minimum salt spray test life of 1000 hours shall be ensured, make-deepak fasteners, sundaram fasteners, lps bossard as per icf. drg. no. 88902006 alt d item no. 6.4. hex head cap screw m10x40-10.9- as per iso 4762 ,is 2269,zinc flake coating(geomet 321 or equivalent) with top coat, without any hexavalent chromium without any integrated or separately added lubricant, minimum salt spray test life of 1000 hours shall be ensured, make-deepak fasteners, sundaram fasteners, lps bossard, as per icf drg. no. 88902005 alt c item no. 5.

CTN :41814613

20 Dec, 2025 NA

Pune - Maharashtra

Tender For bid to ras corrigendum : supply of titanium interbody spacer for thoracolumbar spine fusion bullet shaped with dolpin nose tip nanolock surface technology height 11 or 12 mm as required , tlif interbody spacer peek end plate and titanium body expanded with adjustable lordotic contour and controlled of expansion up to 5mm iso and ce approved 8 or 10 mm as required , uniplanar pedicle screw tav 4.0mm diameter top loading low torque locking mechanism with non threaded locking cap with 90 degree as per specification , polyaxial pedicle screw 4.5mm diameter tav top loading low torque locking mechanism with non threaded locking cap with 90 rotation to capture the rod all as per specification , polyaxial pedicle screw 6.5mm diameter titanium top loading with dual threading cortical and cancellous in screw shaft with cobalt chrome rod system as per specification , neurosurgical patties 20x 20mm , cutting burr 4 mm compatible with 10 cm angled attachment of spine drill system , cutting burr 4 mm compatible with 9 cm straight attachment of spine drill system , diamond burr 3mm compatible with 10cm angled attachment of spine drill system , diamond burr 3mm compatible with 9cm straight attachment of spine drill system , match head cutting burr 3mm compatible with 9cm straight attachment of spine drill system , match head cutting burr 3mm compatible with 10cm angled attachment of spine drill system , match head cutting burr 3mm compatible with 14cm angled attachment of spine drill system , demineralized bone matrix putty with osteoinductive feature 2.5ml , polyglactin 910 with triclosan violet braided antibacterial 90 cm size 1 40mm half circle reverse cutting os , polyglactin 910 with triclosan violet braided antibacterial 90 cm size 2 40mm half circle reverse cutting os , polyglactin 910 with triclosan violet braided antibacterial 90 cm size 0 36mm half circle reverse cutting os , polyclycaprone 25 with triclosan coated knotless tissue control divce spiral unidirectional with fixation loop 60 cm size 3 per 0 24mm 3 per 8 circle reverse cutting needle //bid details 2 / 25

CTN :43166123

23 Dec, 2025 NA

Ernakulam - Kerala

Tender For procurement of gear box spares - gear box spares, pressure gauge, filter element, pressure valve, valve non return rhu 25 sr bar, casing nut, pin threaded with stud, ring sealing shaft 230 x 260 x115, cylindrical bolt with spring ring a, cyl bolt m 30b x 110, din 912, cylindrical bolt b, antifriction bearing, anti friction bearing qj234, anti friction bearing nu 1044, anti friction bearing nu 22319 c, shaft sealing ring 115x114x13, coil distributor e28, wheel a, wheel b, threaded pin a, cylindrical bolt c, pin tapered, ring nut, locking pin, hexagon bolt with spring washer a, anti friction bearing nu 22320c, bush a, hexagon bolt with spring ring a, anti friction bearing a, bush c, hexagon bolt with spring ring b, locking plate a, hexagon bolt with spring washer c, ring sealing shaft 340 x 380 x 20, ring, spring a, locking plate b, threaded pin with nut, pin gapered with nut, clutch support, valve non return r 1/2" v-4-20 6919, spring washer c, piston annular, ring piston 470 x 437 , 4 x 10, ring locking a, disc inner 3-002-340-78-151, disc outer 3-100-210-78-78-005, pin carrier, carrier 4.223 20868/01, bolt cylindrical, clamping sleeve, plug screw, spring washer d, screw cyl m 16 x 120 din 912, spring sk 4.20.7207, hexagon screw w, anti friction bearing 22326c, bush 340x 300 x 92, anti friction bearing, anti friction bearing 29352, bush b, threaded pin b, cylindrical bolt with spring ring d, circlip, key fitteda, cylindrical bolt d, shaft nut, hexagon screw x, anti friction bearing qj243, bearing anti friction, anti friction bearing nu 236e, ring locking, clamp ring, control valve, valve slide, spring, threaded pin c, fitted key, fitted key 32x18x110, bush, fitted key b, threaded pin d, nut shaft, locking bolt, key fitted d, threaded pin e, fitted key c, bush 230 x 200 x 83, cylindrical bolt f, key fitted e, cylindrical bolt with fspring ring g, threaded pin f, bush 1

CTN :43230543

30 Dec, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of hex head plug screw m27x2 (pl 33672064)

Central Government/Public Sector

CTN :43196422

19 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply of set of nickel plated brass pg thread plug screw with gasket and lock nut.

CTN :42757992

24 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of 25vrsc007 d d - oil drain plug p-19c , oil level viewer p-19d , impeller gasket p-28 , o-ring bearing housing p-33b , deflector p-40 , breather p-45 , lip seali.b. p-47 , lip seal o.b. p-49 , coupling , seal kit , valve kit , crankcase , pin crosshead p-64 , bearing hp pump , anode plug , valve kit , seal kit , seal kit , valve kit , bearings- for pump and motor , inlet manifold , spacer discharge valve , retainer spring , manifold discharge , head complete , valve kit , rod connecting assy , gauge oil bubble w/gasket , plug drain 1-4x19bsp , crank case , pan oil , pin crosshead , washer keyholf pos 88 , spacer lo-pressure seal , protector shaft wh screws , plunger retainer kit , valve spring , o ring oil filler cap , high pressure pump , bell housing coupling , victualing fitting , swash plate set , piston set , retainer set , valve plate set , seal kit , pulsation damper 0.16 lts. , seal ring charging screw , charging plug screw , diaphragm for pulsation damper 2 lts , pulsation damper , o ring for head distributor assembly , cartridge filter head , filter element , cartridge filter elements , mechanical seals- for pumps , hp connection fee-brine , o ring hp connection , dt module , dt module service exchange , 3-way ball valve d32 , non return valve vr39-80 , gf pvc-u fitting pipe clips d25 , pressure maintaining valve , 3-way solenoid vv d20 , solenoid valve 3-2 way , solenoide valve actuator , abs ball valve 2 way 25 mm , abs ball valve 2 way 32 mm , 3 way ball valve , flow meter 600-6000lph , flow transmitter , o ring union 20 mm , o ring union 32 mm , o ring ball valve 25 mm 3-2 way pvc , 3-8 high pressure elbow , elbow ss 316 3-4 npt m x 3-4 bsp f , 3-8 tee connector s.s. , hp straight conn 3-4 for smcv , connector 1 1-4 bsp m x 1 1-4 vivt , connector 1 1-4 bsp f x 1 1-4 vivt , vict end connector 1 , straight connector , adaptor for hp discharge 1 id with 1vict , victualic coupling 1 , victualic coupling 1. 1-2 , coupler for vict. coup.1 , victaulic couplers 1.1-4 , victualic couplers 1. 1-2 , pipe clamp 40 mm 2 bolt , elbow pu push in 1-4mxpu4 qsl-1-4-6 , elbow pu push in fitting 1-4 fxpu4 , permeate male elbow , pvc elbow 1-4xpl4 , pvc tee pu9 , pvc tee pu 4 , oil sight glass st. conn. 1-4 mxpu4 , connector straight , straight connector 1-4 m x pu 4 , smcv spindle seat , smcv valve spindle unit , servo motor control valve , solenoid valve 3-8 f 2-way ve83 , solenoid valve ve83 , solenoid valve , sampling cock , non return valve pvc 3-8 , compressed air regulator , control cabinet ro 1530 , door stay for cabinet , circuit breaker 0.63-1a , circuit breaker 20-25 amp , circuit breaker 2 a - 220 v , ckt breaker 10-16 a , contact block , contactor 4 kw , contactor 7.5 kw , processor control unit , thermister over load relay , mcb 2 amp , mcb 2a , single phase protector , miniature relay base for 2 c-o , miniature relay 230 vac , single contact block 1 no type-zbe-101n , fuse base for hrc fuse-bs- 32 amp , hrc fuse 2 amp , fuse - 6 amps , hrc fuse-bs-3nw 415vac 32 amp , auxiliary rotary switches , control transformer 160va , control transformer , potention meter , running hour meter , running hour meter 90-264-415vac-30a6b1 , pressure gauge 0-10 bar , highpressure gauge 0-100bar , pressure switch , level switch , level switch , cleaner for membranes 11 , solution for membranes 44 , conductivity meter , conductivity sensor , conductivity electrode , hand conductivity meter , temperature indicator , flow meter feed , flow switch , sand filetr bracket , lp hose - 15mm id 500mm long with 1-2 bsp m both sides , lp hose 25mm id bare hose , lp hose 25mm idx1 bspmx500l ss316 , lp hose 32 mm id bare hose , hose for pk-20 pump in/out , lp hose 40 mm , hose for pk 20 pump in , hp line pressure gauge pi 61 hp pump discharge , hp hose for pressure gauge

CTN :43093132

02 Jan, 2026 15.00 Lacs

Sagar - Madhya Pradesh

Tender For corrigendum : tender for supply of various implants and instruments - (a) plate group, d.h.s. plate long/short barrel (38/25 mm)with round, d. c., combi holes 1250, 1300, 1350, 1400 angle;2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18 holes, d.h.s screw 22mm /16mm threading with compression screw (top-bolt). (36 mm)50 to 115 mm, in 5mm increments, pediatric d.h.s. set, d.c.s plate (950) with round, d. c., combi holes4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20, 22, 24 holes, angle blade plate (950) with round, d. c., combi holesblade size 50, 55, 60, 65, 70 & 75 mm4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18 holes, trochanteric stabilisation plate to be used with dhs, distal femur locking compression plate (right & left)anatomical pre-shaped & contoured with self-tapping locking head screws; with round locking holes for metaphyseal portion of plate & combiholes for shaft of plate., medial & lateral proximal tibial buttress plate (t- & l- shape)- as per ao specifications.3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, proximal medial & lateral tibial plate 3.5 mm(right & left)anatomically pre shaped and low profile.two different plate design for left and right side with indication on side of plate.plate should have 2 mm holes for proximal fixation with k-wire and sutures for meniscal repair.holes should accept 3.5 mm locking head or 3.5 mm standard cortical screws from 4 to 20 holes with increment of 2 holes., proximal medial/ lateral tibial locking plate for 4.5 mm screwsanatomically pre shaped and low profile design, two different plate design for left and right with indication on plate.round metaphyseal locking holes and combi holes in shaft portion for locking and standard screws.different angulation in proximal part of the plate to avoid primary and secondary loss of reductionshould be compatible for less invasive techniqueholes should accept 5 mm locking head or 6.5 mm standard cancellousl screws from 5 to 13 holes, hockey plate for tibia (right & left)5, 7, 9, 11, 13, 15, 17 holes, contoured medial/ antero-lateral plate for lower end tibia4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, distal medial tibial locking plates 2.7/ 3.5 mm1. anatomically pre-shaped and low profile and specific for right and left side with indication of side on plate, compatible with less invasive fixation.2. rounded edges screw heads should be received into distal section of plate to allow multiple locking head screw placement of 2.7/ 3.5 mm to provide adequate fixation of metaphyseal portion of tibia, and size 4 to 14 holes with increment of 2 holes., anterolateral distal tibial locking plate 3.5 mm1. anatomically pre shaped and low profile and specific for right and left side with indication of side on plate. plate should have head holes to accept 3.5 mm locking head or standard cortical or 4 mm standard cancellous screw.2. head should be received into the plate.3. size from 5 to 21 holes with increment of 2 holes, cobra head plate3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, cobra head locking plate3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, hook plate3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, hook locking plate3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 18, 20 holes, proximal humerus locking plate (philos plate)anatomically pre-countoured platesshould have precisely fitting sleeves for precision placement of screwsshould accept 3.5 mm locking head screws.the screws provided should be available from 26 to 60 mm length.the head of the plate should have holes for securing tuberosities to the plate with sutures.should have low profile of the screws heads to prevent tissue irritation3, 4, 5, 6, 7, 8, 9, 10, 12 holes, contoured locking plate for distal end humerus.(prices to be quoted separately for the following 2 items)(a)anatomically pre-countoured plates for distal medial humerus for anatomical fit with left & right versionshould have precisely fitting sleeves for precision placement of screws.should accept s

State Government

CTN :43071937

20 Dec, 2025 NA

Karur - Tamil Nadu

Tender For procurement of cbfl plug screw feeder adi 23 part no 1 5773036 moc cd4mcu

CTN :43020662

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic spine implants - spine implants, pedicle screw set for spine consisting of 4 screws with ini and 2 connecting rods; top loading, polyaxial screws 4.5mm/5.5mm/6.5mm, length- all sizes, with one trans rod connector(all sizes). titanium., pedicle screw set for spine consisting of 4 screws with ini and 2 connecting rods; top loading, monoaxial screws 4.5m25m/5.5mm/6.5mm, length- all sizes with one trans rod connector(all sizes). titanium., pedicle screw set for spine consisting of 8 screws with ini and 2 connecting rods; top loading, polyaxial screws 4.5mm/5.5mm/6.5mm, length- all sizes. titanium., pedicle screw set for spine consisting of 8 screws with ini and 2 connecting rods; top loading, monoaxial screws 4.5mm/ 5.5mm/ 6.5mm, length- all sizes. titanium, cervical spine locking plate set, titanium. plate length 36mm to 90mm (adequate for one to four level vertebral fixation), 4 screws 4.0 mm( length 14mm/16mm)., top loading implant system for posterior stabilization of cervical spine and upper thoracic spine -the system should have locking screws for angularly stable locking and fixation of the rod. the system must have self- tapping screws. the system must have 3.5 mm ti rod. the system should have oc fusion option. the system should offer hooks. cancellous profile bone screws: 3.5 mm: 8 mm 50 mm (2 mm increments ) 4.0 mm: 8 mm 50 mm (2 mm increments). cortical profile bone screws: 3.5 mm: 28 mm 50 mm (2mm increments). screw head profile: height = 11 mm, diameter=9 mm. rod run = 9 mm. shaft screws (cortical profile):3.5mm: 22 mm 36 mm (2mm increments). shaft screws (cortical profile):3.6mm: 22 mm 36 mm (2mm increments). shaft screws should have 10 mm unthreaded portion rods must be of the following specifications: 3.5 mm ti rod: 80 mm, 120 mm and 240 mm lengths. 3.5 mm/5.0 mm ti rod, 120 mm/170 mm. 3.5 mm/6.0 mm ti rod, 120 mm/170 mm. trans-connector: 60 mm and 75 mm. short and long/left and right hooks. 3.5 mm ti transverse bar. the system should have occipital plate/rods options. should be quoted as a set of 4/6/8 screws with inner nuts and 2 rods. should provide undertaking to provide the instrumentation one day prior to surgery. price of transverse connectors and occipital plate with screws to be quoted separately., titanium mesh cage, fenestrated and hollow from inside to accept bone graft- all sizes (10-16mm dia, 80mm length)., titanium tlif banana cage - all sizes (6/8/10/12mm height, small/medium/large foot print), titanium expandable cage for cervical/ thoracic/ lumbar spine. misc sizes *, device for intervertebral assisted motion 8mm, 10mm, 12mm, 14mm *, titanium anterior staples 13 mm, 15mm, 17 mm, plif cage peek 7-14 mm, foot print 22-28 mm. 1 set consists of 2 pcs *, tlif cage peek 7-14 mm, foot print small/ medium/ large. 1 set consists of 1 pc *, laminoplasty spacer peek with 2 screws misc sizes *, kyphoplasty kit *, vertebroplasty kit *, absorbable haemostat (oxidized regenerated cellulose), sterile 1.25 x 5cm, hemostatic matrix plus flex tip (flowable haemostat)*, non- suture self adhesive artificial dural membrane (small / medium size), round tip diamond burr with long handle (2mm diameter) stryker, round tip diamond burr with long handle (3mm diameter) stryker, round tip carbide burr with long handle (3mm diameter) stryker, hydroxyapatite trapezoidal spacer (2cm x 1cm x 0.5cm) for cervical laminoplasty, titanium lateral mass/ pediclescrews set (4 screws 3.5mm and 2 rods and transverse connector) *, titanium cannulated lag screw for odontoid all sizes *

CTN :43020665

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic arthroplasty implants - arthroplasty implants, basic high flex total knee replacement system: total condylar posterior stabilized (ps)/ cruciate retaining (cr) design anatomic femoral component of various sizes and having design to accommodate high flexion, can accept different sizes and thickness of fixed bearing inserts. fixed bearing cemented tibial tray in various sizes, can accept different sizes of fixed bearing inserts of various sizes & thickness. fixed bearing ps/cr polyethylene insert in different sizes & thickness compatible with various sizes of fixed bearing tibial tray. high viscosity antibiotic loaded bone cement 40 gm. with one pulse lavage system. disposable items consist of the items mentioned below: pulsatile lavage. iodinated surgical adhesive drape ( largesize ) skin stapler. cling tape. gowns (6 nos) stockinet. leg o drape, water impermeable along with screen. surgical oscillating saw blade.orthopaedic gloves with roughened palmer surface., high flex total knee replacement system with attachment of one tibal wedge and one tibial intramedullary extension rod assembly * total knee replacement system, posterior stabilized (ps), design femoral component of various sizes and having design to accommodate high flexion, can accept different sizes and thickness of fixed bearing inserts. fixed bearing cemented tibial tray in various sizes with attachment of one tibial wedge and one tibial intramedullary extension rod assembly, can accept different sizes and thickness of fixed bearing inserts. fixed bearing ps/cr polyethylene insert in different sizes & thickness compatible with various sizes of fixed bearing tibial tray. patella with pegs made of polyethylene available in various sizes. high viscosity antibiotic loaded bone cement 40 gm. disposable items consist of the items mentioned below: pulsatile lavage. iodinated surgical adhesive drape (large size) skin stapler., modular bipolar hemiarthroplasty system. modular bipolar shell containing hdpe inbuilt of different sizes (39-53mm outer diameter and 22/28 mm inner diameter in three different neck lengths). cemented tapered femoral stem (different sizes: extra small, small, medium, and large). cement restrictor centralizer 1 packet of bone cement 40 g. disposable items consist of the items mentioned below: iodinated surgical adhesive drape ( largesize ) skin stapler. cling tape. gowns (6 nos ) stockinet. leg u drape, water impermeable along with screen. ethibond5 : 1 pack with 4 threads.orthopaedic gloves with roughened surface 6 pairs., non-cemented total hip system (metal head on poly) non-cemented ha/porous coated stem having various sizes, can accept multiple offsets of metal heads (small/medium/large/extra-large) with diameter of 28/32/34/36. non cemented porous coated acetabular cup made of titanium alloy available in various sizes, with locking mechanism to accept polyethylene liner of various sizes & diameter (28/32/34/36) must have holes in dome area for screw fixation. the polyethylene liner should be highly cross-linked with various diameters & sizes compatible with acetabular cup & can accept various heads. 3 cancellous screws made of titanium to fix the cup into the acetabulum. disposable items consist of the items mentioned below: iodinated surgical adhesive drape ( largesize ) skin stapler. cling tape. gowns (6 nos ) stockinet. leg u drape, water impermeable along with screen. ethibond 5: 1 pack with 4 threads.orthopaedic gloves with roughened surface 6 pairs., non cemented total hip system (ceramic head on poly ) * non cemented ha/porous coated stem having various sizes, can accept multiple offsets of metal heads (small/medium/large/extra large) with diameter of 28/32/36. ceramic heads (made of delta ceramic) having variable offset (small/medium/large/extra large) with diameter of 28/32/36 mm compatible with the stem. non cemented porous coated acetabular cup made of titanium alloy avai

Plug Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government