Get complete information related to latest Plug Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Plug Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Plug Scrap Tenders.
Tender For maintenance of day to day complaints of water supply including connected items at various loc under ge nagrota - m&l for repair/rectification of leakage to water supply distribution lines 15 mm dia to 25 mm dia gi tubing by necessary excavation, returning/filling as required, tightening of loose joints of union, elbow, socket etc, threading if required including replacement of gi union/socket/nipple as required complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 40 mm dia to 50 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing of 80 mm to 150 mm dia complete all as specified and directed., all as per srl item no.1 above but for gi tubing /di /ci /ms of 150 mm dia to 300 mm dia complete all as specified and directed. note : (i) the complaints for the above works shall be registered by contractor at the water supply complaint cell of age e/m (ii) stationary required such as complaint book, job cards etc shall be arranged by the contractor and proper record shall be maintained by the contractor.(iii) tools ,plumber with helper and transport with driver for attending of above complaints shall be arranged by contractor. (iv) the rate quoted by the contractor for above jobs under item no 1 to 4 shall be inclusive of cost of works under note (i) to (iii) above. (v) the said complaints shall be rectified within 12 hrs of the registration of the complaints failing which recovery of rs.500/commplaint shall be made for contractors due payment (vi) the stores/item required for the works under item no 1to 4 shall be measured separately under relevant item as supply only. (vii) excavation, returning/ filling shall be measured and paid for separately and material required for the works above shall be included to quoted rates., excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep including getting out in hard/dense soil complete all as specified and directed., returning /filling including watering , leveling , spreading and well ramming in layers not exceeding 25cm thick complete all as specified and directed., removing excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 50 metre above the starting point complete all as specified and directed., refixing/relaying of old retrieved steel tubing in new or old position with and including new gi fittings (connections) and as per site requiremen laid in trenches, above ground level or in any position of following sizes as under complete all as specified and directed : -, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, taking down unserviceable gi tubing / upvc tubing from any position complete with all fittings & connections from any position of following sizes as under complete all as specified and directed :-, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and fixing/laying & testing of galvanised steel water tubing, medium grade, isi marked complete with all new galvanized fittings of following sizes laid in trenches/ above ground level or in any position complete all as specified and directed :, 15 mm dia, 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply and laying upvc pipe tubings medium grade pressure rating 10 kgf/cm2 isi mark with all fittings such as elbow, bends, sockets, nipples and union etc and fixed complete laid in trenches or in any other position of following sizes as under complete all as specified and directed , 20 mm dia, 25 mm dia, 40 mm dia, 50 mm dia, supply only gi fittings, medium grade, isi marked of following sizes as under complete all as specified and directed :-, union 15 mm dia, union 20mm dia, union 25mm dia, union 32mm dia, union 40mm dia, union 50mm dia, socket 15 mm dia, socket 20 mm dia, socket 25 mm dia, socket 40 mm dia, socket 50 mm dia, reducer socket 40mmx50mm, reducer socket 15mmx20mm, reducer socket 20mmx25mm, elbow 15mm dia, elbow 20mm dia, elbow 25mm
Tender For supply of ivory sheet , safety gloves , toilet sheet , pipe 4 inch , l bow 4 inch , t joints 4 inch , bit screw , socket 4 inch , nails 2 inch , chinese screw 25 mm , laser speed gun , breath analyser machine
Tender For bid to ras supply of bore , pvc connection with ptmt bolt and nut 15mm dia 450 mm length , waste cupling of cp coated half s steel sink 100 mm , stainless steel grating plate 125mm dia with or without hole , pvc internal kit for 10 ltr pvc flushing cistern , vitreous china wash basin 550 into 400 mm including brackets , gi union 15mm , aluminium door stopper alloy body , lock mortice 65 mm for doors , pvc stop cock 20 mm , pvc water tank cover for 1000 ltr tank , gi union 20mm , brass spindle half round for cp bib cock 15 mm , cp brass phase head for bib cock pillar cock concealed stopcock , gi tee 20 mm , jet spray cp with 1 point 2 mtr flexy tube , gi socket 20mm , brass spindle for cp pillar cock 15mm bore , pvc stop cock 15 mm ext threading , aluminium alloy anodised 125 mm long makeclassicargent , gi tee 15 mm , cp telephonic shower with 1 point 2 m tube with hose and hook , gi reducer elbow 20 mm into 15mm , gi socket 15mm , mild steel sliding bolts 300 mm long plate type , pvc water tank cover for 500 ltr , gi elbow 20 mm , cp concealed stop cock 15 mm , gi elbow 15 mm , mild steel barrel tower bolt 150 mm long , mild steel helical door springs including roller and roller plate , oil putty , gi reducer socket 20mm into 15 mm , aluminium anodised section 150 mm long , brass spindle half round for cp concealed stop cock , mild steel pressed stove enamelled black 150 mm , mild steel sliding bolts 250 mm long plate type , gi nipple 20mm into 125 mm , galvanised wire cloth mesh 0 point 56 mm nominal dia of wire , gi nipple 20mm into 150 mm , gi tank nipple 20 mm , gi nipple 15mm into 150 mm , gi nipple 15mm into 100 mm , plywood commercial 8 fett into 4 fett 12 mm thick grade bwr , gi nipple 15mm into 125 mm , gi nipple 15mm into 50mm , gi tank nipple 15 mm , towel ring brass chromium plated , gi nipple 15mm into 75mm , washer for syphone sets internal external dia of washer , aluminium alloy anodised sliding door bolt with hasp staple 250 mm long , plywood commercial 8 feet into 4 feet into 9 feet mm thick grade bwr , mild steel barrel tower bolt 200 mm long , teflon tape roll plumbing , pvc urinal pipe 40 mm dia 750 mm long flexible pipe , gi pipe 20 mm dia medium grade , plywood commercial 8 fett into 4 feet into 6 mm thick grade bwr , brass spindle for concealed stop cock , butt hinges, medium weight cold rolled mild steel 100 mm long , pvc bend pipe for superflow of flushing cistern , hex nipple 15 mm , gi plug 15mm , plywood commercial 8 feet into 4 feet into 4 feet mm thick grade bwr , mild steel mortice lock vertical type 2 levers 75 mm long with two set , vitrous china water closet seat ewc white , gi pipe 15 mm dia medium grade , aluminium alloy handles fabricated type, anodised 150 mm long , door seal with nylon brush side to of door shutter , thread roll good quality , tower bolt 125 mm long , mild steel powder coated hat and coat hook 6 nos of hook , statinless steel holder for curtain rod 25mm dia , mild steel wood screws size 19 iinto 10pack of 100 nos , mild steel full length threaded screws for iron window size n exc 15mm , mild steel cp coated hasp and staple 75 mm long , m-seal liquid , aluminium anodised, barrel tower section 200 mm long , pvc plugs for fixing screws to drill holes pack of 100 nos , sheet glass pin headed 4 mm thick. 4 feet into 4 feet , plywood commercial 8 feet into 4 feet into 19 mm , white cement shower rose 125mm joints brass chromium plated , stainless steel plate rack of size 900mm into 600mm thickness 1 mm , bib tap chromium plated 15mm dia isi marked, fancy type, angle valve cp brass 15mm bore, pvc cabinet looking mirror of size 600 into 450 mm , stop cock //bid details 2 / 82
Tender For providing, laying and jointing socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (200 mm dia di k-9 pipe) conforming to is8329/2000 with suitable rubber gasket (push on) joints as per is:5382/85 including testing of joint (laying conforming to is 12288 : (200 mm dia di k-9 pipes.) & for balance work of old work orderwith latest amendment including valves & specials as per specification with materials including all allied civil works & trial run for three month under charama augmentation water supply scheme.
Tender For corrigendum : procurement of maintenance materials for main conveying pipeline of 400mm dia, 500mm dia and 600mm dia for sd ii, wd ii, ddw, mapusa, goa. - supplying cast iron fittings as per is : 1538 -1993 including sealing rubber gasket (nr) ci compression glands and coated ms nuts bolts.;mechanical compression collar coupling;nominal dia in mm;400, supplying cast iron fittings as per is : 1538 -1993 including sealing rubber gasket (nr) ci compression glands and coated ms nuts bolts.;mechanical compression collar coupling;nominal dia in mm;500, supplying cast iron fittings as per is : 1538 -1993 including sealing rubber gasket (nr) ci compression glands and coated ms nuts bolts.;mechanical compression collar coupling;nominal dia in mm;600, supplying at store or site of work including railway freight carting loading and unloading stacking etc. centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to is : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per is : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as tyton joints. class k-9 .;nominal diameter in mm;400, supplying at store or site of work including railway freight carting loading and unloading stacking etc. centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to is : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per is : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as tyton joints. class k-9 .;nominal diameter in mm;500, supplying at store or site of work including railway freight carting loading and unloading stacking etc. centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to is : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per is : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as tyton joints. class k-9 .;nominal diameter in mm;600