Latest plug valves Tenders | Government plug valves Tenders

Central Government And Public Sector

CTN :40447136

09 Jun, 2025 92.85 Lacs

Panipat - Haryana

Tender For corrigendum : supply of plug valves as per tender specifications-4940130694 , plug valves as per tender specifications-4940071224 , plug valves as per tender specifications-4940071574 , plug valves as per tender specifications-4940071764 , plug valves as per tender specifications-4940072064 , plug valves as per tender specifications-4940072264 , plug valves as per tender specifications-4940132464

CTN :40627342

27 Jun, 2025 NA

Bokaro - Jharkhand

Tender For ptfe lined plug valves

Central Government/Public Sector

CTN :40351999

12 Jun, 2025 NA

Numaligarh - Assam

Tender For corrigendum : supply of plug valves for ag and ug piping for msb, pfcc, gds and ff for nrep as per technical specifications for numaligarh refinery limited, assam, india - group-1 (group wise evaluation)supply of plug valve for ag+ug piping for nrep project including tpi charges as specified in material requisition., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in preferred and, non preferred flow direction., preferred flow direction shall be marked., sleeve to be checked for, process data and alternative to be, specified if not suitable., plug valve cs (caustic), 150,0, api 599, flgd,b16.5, rf, lo,non lubricated,tapered plug, regular pattern, fire safe, with locking arrangement, all welds shall be subjected, to pwht., with anti-static device., a105n / a216 gr.wcb, plug ss 316, sleeve rptfe, gf ptfe wedge ring, diaphragm rptfe+ss316 backup, graphite cover seal, a193 gr.b7/a194gr.2h, thrustcollar ss 316, add. information, documents to be followed, tk-1zzza-pi-spe-0005,tk-1zzza-pi-spe-0006,, tk-1zzza-pi-spe-0008,tk-1zzza-pi-spe-0009, and in-042, vendor to submit pressure-temp., rating chart, design pressure1 14.5 kg/cm2(g), design temperature1 70 deg.c, design pressure2 3.5 kg/cm2(g), design temperature2 200 deg.c, valve shall be suitable for, bi-directional flow & pressure shutoff, valve shall be tested in pref

Private Sector

CTN :40344013

13 Jun, 2025 NA

Kamrup - Assam

Tender For corrigendum : supply of ball valves as per mr item 1 , ball valves as per mr item 2 , ball valves as per mr item 3 , ball valves as per mr item 4 , ball valves as per mr item 5 , ball valves as per mr item 6 , ball valves as per mr item 7 , ball valves as per mr item 8 , ball valves as per mr item 9 , ball valves as per mr item 10 , ball valves as per mr item 11 , ball valves as per mr item 12 , ball valves as per mr item 13 , plug valves as per mr item 14 , plug valves as per mr item 15 , plug valves as per mr item 16 , plug valves as per mr item 17

State Government

CTN :40140156

16 Jun, 2025 18.71 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : supply of various size of plug valves and sealant stick for ash handling system of ash plant unit no.3,4&5 at gtps.

CTN :40541013

14 Jun, 2025 NA

Tuticorin - Tamil Nadu

Tender For supply of turbine and control valves special fasteners - st020270009 - screw hex am42x100 for lp inner casing assembly, drawing and part no. 1074341000-49 , st020270010 - screw hex am36x120 for lp inner casing assembly, drawing and part no. 1074341000-50 , st020270022 - plug hex. head g- half an inch for esv servomotor, drawing and part no. 1140127000-21 , st020270032 - cap nut pm52 for esv - cv casing, drawing and part no. 1122205000-14 , st020270033 - cap nut am30 for esv - cv casing, drawing and part no. 1122205000-15 , st020270041 - screw plug m60x2 for iv servomotor, drawing and part no. 1140327000-13 , st020270048 - stud bm90x6x360-25x306 for iv and cv casing, drawing and part no. 1132136000-11 , st020270049 - cap nut pm90x6 for iv - cv casing, drawing and part no. 1132136000-12 , st020270057 - stud m16f0x70 for interceptor valve, drawing and part no. 11132036000-3 , st020270058 - cap nut am36 for interceptor valve, drawing and part no. 11132036000-4 , st020270067 - grub screw is-6094-71 mat.10.9 em10x20 for emergency governor, drawing and part no. 1162705000-4 , st020270091 - sealing washer b 6.2x17.5,s-2.5 for supply unit for valves hp 1-2, drawing and part no. 1144105000-9 , st020200440 - washer - follow up piston - hyd amplifier - drawing no. 1142305000 and part no. 87 , st020200453 - turn buckle nut m20 - ipcv servomotor - drawing and part no. 1140427000 - 86 , st020270295 - screw hex. pm24x75 for hp casing support , st020270296 - washer mcd-st 31 for hp casing support , st020270297 - hex bolt m36x220 for hp casing support , st020270298 - m cd washer 37 for hp casing support , st020270299 hex screw m36x70 for hp casing support , st020270301 - screw set hex. bm36x10x200 for turbine toolkit, drawing no. 81208745000-1-2 and part no. 11 , st020200498 - bolt press out bm36x200 for governing system, drawing no. 81202725500-0-13 and part no. 31 , st020280075 - cap nut m16x55 for hp front bearing pedestal, drawing no. 1160127000 and part no. 24 , st020280076 - nut d m16 for hp front bearing pedestal, drawing no. 1160127000 and part no. 25 , st020200319-washer 6.6x10.5x7 for att change over valve, drawing and part no. 1143505000-52 , st020270722-stud m30 for ms and hrh strainer housing, drawing and part no. 11315092000-7 , st020270723-nut hex pm30 for ms and hrh strainer housing, drawing and part no. 11315092000-9 , st020270706 - hexagon nut m3 grade 8, iso 4032 for lpbp stop valve , st020270707 - hexagon nut nfm16 grade 8, din 2510 for lpbp spray control valve , st020270717 - stud m52x240 drawing no- 1122205000-1-5, part no-12 , st020270716 - stud m30x150 drawing no- 1122205000-1- 5, part no-13 , st020270712 - stud m36x165 drawing no11132236000-1-3, part no-2 , st020270718-stud m16f0x70 drawing no- 11132236000-1-3, part no-3 , st020270719-cap nut am36 drawing no- 11132236000-1- 3, part no-4 , st020270059 - nut hex. am16 drawing no11132236000-1-3, part no-5 , st020270708 - scru cap soc a12.9 m8x40 drawing no- 1140205100-0-14, part no51 , st020270711 - scru hexp -8.8 m5x10 drawing no1140205100-0-14, part no-52 , st020270713 - scru hex a8.8 m10x30 drawing no- 1140205100-0-14, part no-53 , st020270621 - scru hex a- 8.8 m12x30 drawing no1140205100-0-14, part no-54 , st020270710 - scru cap soc th hd a-8.8 m5x10 drawing no- 1140205100-0-14, part no-55 , st020270616 - scru cap soc a12.9 m5x10 drawing no- 1140205100-0-14, part no-56 , st020270068 - scru cap soc th hd a-8.8 m5x16 drawing no1140205100-0-14, part no-57 , st020270715 - scru cap soc a12.9 m6x16 drawing no- 1140205100-0-14, part no58 , st020270652 - scru cap soc a12.9 m8x16 drawing no- 1140205100-0-14, part no-59 , st020270709 - scru cap soc a12.9 m8x40 drawing no- 1140205100-0-14, part no-60 , st020270410 - scru cap soc a12.9 m12x25 drawing no- 1140205100-0-14, part no-61 , st020270714 - scru cap soc p-12.9 m10x100 drawing no- 1140205100- 0-14, part no-62