Latest plumbing fittings Tenders | Government plumbing fittings Tenders

CTN :45280777

02 Jul, 2026 16.00 Lacs

Srinagar - Jammu And Kashmir

Tender For bid to ras supply of construction sub base and base 168 sqm , supply and stacking of graded stone aggregate , providing and laying wet mix macadam on prepared sub grade sub base , providing and applying tack coat using hot straight run bitumen , providing and laying 15mm thick premix bituminous macadam base course with stone aggregate , providing and laying 15mm thick semidence bituminous concrete using material aggregate , curbing , providing and laying stone soling dully hand packed , providing and laying in position cement concrete , providing and laying in position specified grade of cement concrete , centring and shuttering , synthetic layer , supply and installation of badminton post , badminton racket branded , water remover roller imported , water drainage system , tarpaulin , digital score board with accessories 2 by 3 , led sports light , installation and commission charges

CTN :45730419

20 Jul, 2026 NA

Raebareli - Uttar Pradesh

Tender For work contract of interior - exterior, mechanical and electrical "furnishings & fittings including interior & exterior plumbing fittings and additional water filling arrangement / activities with coach lowering" in lwscn lhb type coaches and mechanical and electrical "furnishings & fittings including interior & exterior, plumbing fittings / activities with coach lowering in lws/ddg lhb type coaches as per scope of work as per scope of work.

CTN :45733076

06 Jul, 2026 NA

Sojitra - Gujarat

Tender For 1. purchase of necessary goods for the sanitary department of municipality; 2. purchase and repair of necessary goods for the streetlight department of municipality; 3. repair of motor, rewinding, and starter for the water/meter motor in the water/meter department of municipality; 4. purchase of necessary goods for the stationery department of municipality; 5. printing work for the stationery department of municipality; 6. annual rate for the work of cleaning gutters by skilled laborers/contractors in the gutter department of municipality. note: for details of items 1 to 5, the last date for submitting tenders is 05/09/2023, and the last date 7. supply of necessary galvanized/non-galvanized, h.d.p.v.c.v.c.c. pipes and fitting materials for the water supply department of municipality; 8. annual rate for supplying submersible motor, panel, cable, valve and related accessories for the existing pumping station in sojitra municipality; 9. annual rate for painting the existing water tanks in various areas of sojitra municipality; 10. annual rate for supplying and repairing valves (53mm to 200mm dia) of hdp/pvc/di/ci/cc pipes for the water works pipeline and annual rate for supplying pipes of all types and similar materials; 11. annual rate for computer service maintenance and printer refilling/service for office use in sojitra municipality (hp 1007, hp 1020 (no.-5), samsung-1610, canon mf4320, mfc-j430w color printer); 12. annual rate for supplying and fitting cement concrete blocks and paver blocks for gutters in the gutter department of sojitra municipality; 13. annual rate for labor and material for laying new lines for rainwater drainage in various areas of sojitra municipality; 14. annual rate for supplying necessary materials like cement, sand, gravel, bricks, soil, etc., for the construction of new gutters in various areas of sojitra municipality; 15. annual rate for supplying various items like k.j.b.c., small tractor, trolley, engine oil, hydraulic oil and all other spare parts; 16. annual rate for repairing various items like power pack, 30 h.p.t.a.m.t.d. tractor, water bowser, weighing machine, street light, water pump, water tank, and trolley with k.j.b.c. and s.m.t.d. in various areas of sojitra municipality; 17. annual rate for repairing punctures of k.j.b.c. tractor and trolley tires in the sanitary department of sojitra municipality; 18. annual rate for supplying new tires for k.j.b.c. tractor and trolley in the sanitary department of sojitra municipality; 19. annual rate for repairing super suction machines for cleaning new and old gutters and manholes in sojitra municipality; 20. annual rate for supplying a4 size paper for daily office work in sojitra municipality (approx. 1000 reams); 21. annual rate for supplying new motor pump, cable, panel, starter and other materials up to 10 hp for the existing pumping station in the water works department and fitting work; 22. government work, vehicle rental; 23. supply of drinking water in municipality. 24. annual rate for supplying various items like stage, speaker, mic, chairs, tables, etc., for various programs held in the municipality; 25. annual rate for providing tea and snacks for officers, visitors, survey teams, and other municipal officials visiting the municipality for higher education; 26. annual rate for various schemes for government/public welfare work to be done throughout the year; 27. annual rate for digging new gutters in the municipality area.

CTN :45692458

15 Jul, 2026 75.91 Lacs

Panaji - Goa

Tender For supply of machinery and equipment - uv-vis spectrophotometer spectrophotometer should be of true double beam optics system. sample compartment should have dedicated one reference cell holder and one sample cell holder. system should be czerny-turner monochromator with lo-ray-ligh grade blazed holographic grating or equivalent. system should have a light source of 20-w halogen lamp and deuterium lamp. automatic switch over of light source to be possible and auto position adjustment. system should have a fixed spectral bandwidth of 1nm. system should have facility to use as stand-alone keyboard-display and with pc-controlled software. wavelength range should be from 190 nm to 1100 nm and wavelength accuracy should be 0.1 nm at d2 656.1 nm & 0.3 nm for entire range. stray light: less than 0.02% at 220 nm (nai)less than 0.02% at 340 nm (nano2) less than 0.5% at 198 nm (kcl) photometric range:absorbance: -4 to 4 abs transmittance: 0% to 400% system should have photometric accuracy : 0.002 abs at 0.5 abs 0.004 abs at 1.0 abs 0.006 abs at 2.0 abs(measured using nist930d/nist1930 or equivalent) system should have a baseline flatness: less than 0.0006 abs (1,100 to 190 nm, one hour after light source turned on) system should have a noise level: less than 0.00005 abs (700 nm). detector should be silicon photodiode only. system should have a usb drive port to connect the printers or external drives. system should compulsorily have bio-method mode of measurement for determining dna and protein concentrations. quantitates dna or protein using the absorbance at 260/230nm. system should be capable of identification of organic compounds, chemical reaction tracking and enzyme reaction measurement. pc with relevant hardware including monitor keyboard, mouse., fuming hoods the proposed floor-mounted aerodynamic fume hood (1800 1000 2350 mm) is designed for safe handling of hazardous fumes, ensuring high performance, durability, and compliance with international standards. the system should be a robust, corrosion-resistant, and safety-compliant solution with efficient airflow management, user-friendly maintenance features, and adherence to international laboratory safety standards ideal for advanced research and chemical handling applications.1) design & compliance aerodynamic structure with automatic bypass airflow system. conforms to ashrae 110:2016 / en 14175 standards, including tracer gas containment test. certified ashrae compliance required 2) construction & materials made of powder-coated galvanized iron (gi, 120 gsm, is 277 compliant) sheet thickness: 1 mm (1.2 mm for structural supports) heavy-duty base frame: 60 40 2 mm phenolic resin (6 mm) inner liner: chemical-resistant, smooth, easy to clean ss 304 worktop with 15 mm raised edges for spill containment ss 304 aerodynamic airfoil with anti- corrosive coating 3) dimensions & workspace usable workspace: 1500 mm (w) 850 mm (d) 1180 mm (h) clear viewing height: 1100 mm modular base cabinets with maintenance access 4) coating & finish 8-stage chemical pre-treatment epoxy polyester / polyurethane coating (70 80 microns) corrosion resistance validated by 1000-hour salt spray test 5) functional features vertical sliding toughened glass sash (4 5 mm), counterbalanced openable front top panel for easy maintenance aerodynamic baffle system for efficient fume removal (light to heavy fumes) flow control damper for airflow regulation 6) utilities & safety integrated gas, water, and electrical fittings in corner posts remotely operated, color-coded service valves safety partition between utilities no cable entry below sash (enhanced safety design) electrical fittings: norysis /legrand (230v, 5/16a, 50 hz) 7) accessories pp cup sink with water tap and drainage led lighting with protective enclosure adjustable leveling screws ( 10 mm) storage base cabinets with shelves and self-closing shutters 8) centrifugal blower specifications remote, silent ms + frp blower with chemical-r

CTN :45690779

02 Jul, 2026 79.74 Lacs

Mumbai - Maharashtra

Tender For replacement of sanitary/plumbing fittings, fixtures in toilets with replacement of tiles and special repair works as required in quarters etc. for quarters on change of tenancy at sector-vii, phase-i, s.m.plot, antop hill, mumbai-37 during 2025-26.subwork/packages:replacement of sanitary/plumbing fittings, fixtures in toilets with replacement of tiles and special repair works as required in quarters etc. for quarters on change of tenancy at sector-vii, phase-i, s.m.plot, antop hill, mumbai-37 during 2025-26

Central Government/Public Sector

CTN :45671391

15 Jul, 2026 50.00 Lacs

Mumbai - Maharashtra

Tender For repairs to leakage and seepage in bathroom, kitchen, roof and sanitary, plumbing fittings to otm and md accn in area-iv of age b/r (west) under ge (west), colaba, mumbai

Central Government/Public Sector

CTN :45673754

15 Jul, 2026 50.00 Lacs

Mumbai - Maharashtra

Tender For repairs to sunken portion, sanitary/plumbing fittings, loft tank and certain b/r works at area-v under age b/r (central) of ge (west) colaba mumbai

Central Government/Public Sector

CTN :45664430

15 Jul, 2026 25.00 Lacs

Bardhaman - West Bengal

Tender For repairs/ replacement to joinery, sanitary/plumbing fittings, tiling and allied works at af stn arjan singh under ge (af) panagarh

State Government

CTN :45661343

03 Jul, 2026 75.37 Lacs

Ambala - Haryana

Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl

CTN :45024555

26 Jun, 2026 NA

Jabalpur - Madhya Pradesh

Tender For bid to ras supply of volleyball court d d - bituminous base work , synthetic acrylic ultra cushion system coat , allied accessories , chain link fencing with 10 feet height , construction of drainage system

Plumbing Fittings Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government