Latest plumbing item sale Tenders | Government plumbing item sale Tenders

Central Government/Public Sector

CTN :43571006

17 Jan, 2026 NA

Jaipur - Rajasthan

Tender For supply of plumbing materials (center valve, ball cock etc.)

Trust

CTN :43312262

19 Jan, 2026 20.00 Lacs

Banaskantha - Gujarat

Tender For corrigendum : annual rate contract for providing plumbing materials like as g.i., p.v.c and u.p.v.c. supply for work

Central Government And Public Sector

CTN :43521723

30 Jan, 2026 NA

Patna - Bihar

Tender For supply of bathroom work : : -removing , providing , priming , painting , laying , dismantling , tap , shower , westerns commode , wash basin , plumbing charge , plumbing materials , wash room hanger , washroom mirror

CTN :43440008

15 Jan, 2026 NA

Chungthang - Sikkim

Tender For corrigendum : name of work: supply of ds ojl - 1. puf insulated prefab modular jco living shelter (double storey) of size 23.40x6.10m including 1.5 m wide veranda with specification and drawing schedule of structure as per tender documents( rfp).1.1 store list of structure items & construction materials, electrical & plumbing items and furniture items as per tender document in page no 47 to 58 as per tender documents.

CTN :43334968

14 Jan, 2026 NA

Trivandrum - Kerala

Tender For corrigendum : supply and installation of plumbing items for the construction of isolation wards in kerala -zone 2. - plumbing items, providing and fixing white vitreous china coupled type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid, providing and fixing pedestal type wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china pedestal type wash basin with a 15 mm c.p. brass pillar tap, providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete., supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp health faucet superior quality ( jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supply,fixing, testing and commissioning angle valves make: kohler or equivalent, supply,fixing, testing and commissioning at site c.p. brass bib cocks long noze with wall flange make: kohler or equivalent, providing, fixing, testing and commissioning at site in position floor trap, with stainless steel grating, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-i

CTN :43334983

14 Jan, 2026 NA

Trivandrum - Kerala

Tender For corrigendum : supply and installation of plumbing items for the construction of isolation wards in kerala -zone 1 - plumbing items, providing and fixing white vitreous china coupled type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: w.c. pan with isi marked white solid plastic seat and lid, providing and fixing pedestal type wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china pedestal type wash basin with a 15 mm c.p. brass pillar tap, providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete., supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supplying and fixing cp health faucet superior quality ( jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge., supply,fixing, testing and commissioning angle valves make: kohler or equivalent, supply,fixing, testing and commissioning at site c.p. brass bib cocks long noze with wall flange make: kohler or equivalent, providing, fixing, testing and commissioning at site in position floor trap, with stainless steel grating, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 15 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes& fittings, with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in

State Government

CTN :43510194

27 Jan, 2026 NA

Multi City - Telangana

Tender For procurement of sanitary and plumbing materials and chemicals

CTN :43461723

16 Jan, 2026 6.64 Lacs

Holenarsipur - Karnataka

Tender For construction of sanjivini sheed in nagaranahali village - plumbing materials, vitrified tails 600x600 mm, whitenings, dry distempers, add hom of welding and grinding meaching 2 % on materials, powder coted 60-70 micron, honne wood planks, honne wood wood, broken stone aggregate 40 mm size sh01, water tanker 3, gravel 2.36 mm/murrum 123, cobble stones of 60 mm thick sh46, anticorrosive bituminous paint (black) sh39, tools and plants 2 on material sh44, mechanic class ii/mechanic hmp grade i/eme grade sh41, hom of welding and grinding machine sh42, welder grade i sh40, corbon electrodes pdos, gusset plates 3.15 mm thick mr9924, mm 100 dia m.s pipe hallow, unit cost as per the specification 143, white china clay basin, s trap 100 mmshra, add pdos, binding wire sh24, tmt bars fe 500 sh23, mixer (concrete) - 1 cum capacity sh07, plasticizer / super plasticizer sh20, broken stone aggregate 12 mm to 10 mm size sh 04, broken stone aggregate 20 mm size sh02, silver oak or equivalent planks 38 mm thick shra, jungal wood runner, handling loading and unloading 3% on material 123, labour charges for lifting and placing in position and making connection at 7% on material 123, polyenthylene water storage tank of specified capacity l 123, water proofing cement paint sh29, painter class i sh31, add brush, putty, sand paper at 2% on cost of paint sh30, add white cement for pointing at 2% on material shra, border tiles 30 x 10 cms 12, glazed tiles 300x450 12, plane glass, fabricatorss, pvc beadingss, rubber bidding, cleat angels, alluminial handel, alluminiam bolt, mason class i (with tools) sh15, add handling , loading and unloading at 2% on material 19, add cutting and other wastage 5% 12, mathi/nandi wood scantling 123, add providing and removing scaffolding at 3% on labour sh32, add watering charges at 1 % on labour sh19, add handling , loading and unloading at 1% on material sh27, casurina poles 100 - 150 mm sh26, mixer (concrete small used in culvert) sh14, coarse sand (zone iii) sh05, portland cement sh06, solid concrete block 401520 cms 5.00 n/sqmm sh25

State Government

CTN :43463725

27 Jan, 2026 NA

Gandhinagar - Gujarat

Tender For supply of plumbing & carpentry materials for residential and public buildings in colony area at gtps - cp pillar cock size 1/2" (15 mm) dia, brass stop cock cp-15 mm, c.p.bib cock size 15 mm, cp brass flush cock size 1" dia km make, brass ball cock set 3/4" (20 mm dia), pvc flexible connection pipe 1/2"x2(600 mm), upvc pipes 1/2" dia for water distribution system, upvc pipes 3/4" dia for water distribution system, upvc pipes 1" dia for water distribution system, upvc elbow 1" dia fittings for water distribution system, upvc elbow 1/2"dia for water distribution system, upvc elbow 3/4"dia fittings for water distribution system, upvc tee 3/4" fittings for water distribution system, upvc tee 1x1/2" fittings for water distribution system, upvc reducer 3/4x1/2" fittings for water distribution system, upvc reducer 1x3/4" fittings for water distribution system, upvc mta 1/2", upvc mta 3/4", upvc mta 1", upvc fta 3/4", upvc fta 1", upvc solution 120ml, upvc valve 1/2", ms bracket for washbasin - 15" long, pvc waste pipe, upvc coupling 3/4" fittings for water distribution system, upvc coupling 1/2" fittings for water distribution system, upvc coupling 1" fittings for water distribution system, gi coupling size 3/4" for civil work, g.i.coupling size 1" ., gi nipple 1/2" x 3" long for civil work, gi nipple 15 mmx4 long for civil work, gi nipple size 3/4" x 2" long for civil work., gi nipple size 3/4" x 3" long for civil work., g.i elbow 1" x 3/4" dia, g.i elbow 1" x 1/2" dia, gi union size 3/4", gi tee 1x1/2 for civil work., gi reducer 3/4"x1/2", gm wheel valve 1" dia