Latest plumbing pipe Tenders | Government plumbing pipe Tenders

Central Government/Public Sector

CTN :45556881

23 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For design, supply and installation of heating arrangement of water tanks,insulation arrangement of plumbing pipe lines and bio tanks for one coach set of memu for usbrl section as per specification edts-442, rev-a with annexure-2 dated 03.07.2025 and amendment-01. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45336073

23 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : design, supply and installation of heating arrangement of water tanks,insulation arrangement of plumbing pipe lines and bio tanks for one rake set-12 car formation of memu for usbrl section as per specification edts-442 rev-a with annexure-2 dated 03.07.2025. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45549523

30 Jun, 2026 NA

Tirupattur - Tamil Nadu

Tender For supply of r.o pipe: ro pipe with an outer diameter (od) of 1/4 inch (approximately 6.35 mm), manufactured from food-grade polyethylene (pe) or polyvinyl chloride (pvc) material. the pipe shall be non-toxic, flexible, and suitable for use in drinking water and ro purification systems. the pipe shall be capable of handling pressures up to 120-230 psi (pounds per square inch) at room temperature (approximately 21 degree c). [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45555978

19 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply of exterior stickers for ac 3t amrit bharat coaches., as per drawing: lwaccn/pp2-8-3-002 alt annual repair w/o item 3,16 & 23, follow material spec. to rdso specification no. rdso/2006/cg-13 rev-01 option b (ref. md46271 dated 01.04.2025), packing instruction: exterior sticker/ marking diagram outside set of sidewall stickers should be rolled firmly on a cardboard tube/pipe of aprox. 03 inches diameter of sufficient strength and length more than sticker 2-3 inches of maximum width of sticker . endwall stickers of same set should also be rolled on seperate another cardboard tube/pipe (having similar dimensionaland strength parameter ) in same way. both tubes of one set should be packed together in a bio degradable transparent polyethylene packing. stickers or any edge ofsticker should not be found folded in packing. vinyl film side of stickers should be on the outside of tubes.these individual sets annual repaire further to be packed in card box (containing bulk quantity of sets). a list should be pasted on each set of transparent polyethylene packing and also on card box (containing bulk quantity of sets) showing pl no., item description, po no., name and address of supplier, date of manufacturing, lot number, lot quantity, list of items in a set etc. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45561240

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of 400mm id double wall corrugated high density polyethylene pipe within line socketed pipe of min 74 mm length with rubber ring as per is 16098 part2: 2013 - sn8 with antirodent and non-flaming property. [ warranty period: 30 months after the date of delivery ]]

Central Government/Public Sector

CTN :45561245

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of 300mm id double wall corrugated high density polyethylene pipe within line socketed pipe of min 64mm length with rubber ring as per is 16098 part 2: 2013 - sn8 with antirodent and non-flaming property. [ warranty period: 30 months after the date of delivery ]]

CTN :44468172

13 Jun, 2026 NA

Paschim Medinipur - West Bengal

Tender For bid to ras supply of insulation tester (q3) , supply only 80 mm bore sluice valve pn - 1.6 is 14846-2000 with spindle iron etc. , supply only 100 mm bore sluice valve pn - 1.6 is 14846-2000 with spindle ironetc. , supply only 150 mm bore sluice valve pn - 1.6 is 14846-2000 with spindle iron etc. , supply only 200 mm bore sluice valve pn - 1.6 is 14846-2000 with spindle iron etc. , supply only 50 mm bore gate valve gum metal class-ii screwed down high pressure etc. , supply only 40 mm bore gate valve gum metal class-ii screwed down high pressure etc. , supply only 25 mm bore gate valve gum metal class-ii screwed down high pressure etc. , supply only 20 mm bore gate valve gum metal class-ii screwed down high pressureetc. , supply only straight plain brass ferrules or connecting screws screwed bolt ends of size 20 mm bore pipe etc. , supply only straight plain brass ferrules or connecting screws screwed bolt ends of size 25 mm bore pipe etc. , supply only rotational moulded polyethylene water storage tank cylindrical vertical with closed top of capacity five hundred litres etc. , supply only rotational moulded polyethylene water storage tank cylindrical vertical with closed top of capacity one thousand litres etc. , supply only twenty five millimeter bore gate valve gum metal class two screwed down high pressure with clutch handle etc. , supply only twenty millimeter bore gate valve gum metal class-two screwed down high pressure with clutch handle screwed both etc.

State Government

CTN :45505911

25 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of exhibit packing bag 10kg , exhibit packing bag 15kg , forensic exhibit packing enveloped lxw 21x29 7 cm or a4 size , forensic exhibit packing enveloped lxw 420x29 7 cm or a3 size , forensic exhibit packing enveloped lxw 216x35 6 cm or legal size , forensic exhibit packing enveloped lxw 11x5 cm or equivalent , printed selfsealing cloth for exhibit packing bag 5x11 inch , printed selfsealing cloth exhibit packing bag 10x12 inch , packing tape as for user requirement 0 5inches transparent , packing tape as for user requirement 1inches transparent , packing tape as for user requirement 2inches transparent , packing tape as for user requirement 0 5inches broun , packing tape as for user requirement 1inches broun , packing tape as for user requirement 2inches broun , glass cleaner collin 500ml or higher , handwash 200ml , handwash 175ml , sanitizer 200ml , tissue two plies 200pulls per pack , tissue one plies 50pulls per pack , high quality tissue box , mask , gloves size m , surgical blade 20 no , surgical blade 22 no , scissor plastic thickness 1 7mm , zipper pouch , cotton roll , sand paper , exhibit tray , apron , garbage bin with lid , high density plastic container 20ltr , high density plastic container 10ltr , measuring tape , plastic wash bottle 1ltr , mug , all out with refill , test tube brash , bottle washing brush , anti blue light and anti galve screen guard , dropper 6 inch , aluminum foil paper , air gas cylinder refiling , nitrogen gas cylinder refiling , argon gas cylinder , helium gas cylinder , hydrogen gas cylinder , esd slippers 10 number , esd slippers 7number , sens room freshener ocean mist spray , 20ml vial , 2ml vial , water jug , water glass , water battle hdpe high density polyethylene , water cattle , thermosteel water bottle , tea cup , tea tray , domestic plate bone china , disposable white plate , water glass disposable , bisleri 250ml water bottle pack of 24 , bisleri 500ml water bottle pack of 24 , coil heater , heatingcoil 1500 watts , cotton hand white towel , towel big , cleaning duster , computer cleaning clothes , latta clothes , basta clothes , door mat 45cm x 75 cm , door mat 60cm x 90 cm , lock medium , nescafe coffee , 2 in 1 telephone , landline phone , led bulb 5 volt , led bulb 9 volt , led bulb 15 volt , tube light 20 watts , pipe 1 inch , hdmi adopter , 3 pin tops , 2 core multi standard wired , mcb 16 ampere , mcb 20 ampere , mcb 4 way , fan regulator , surface ceiling light , power cable , floor cleaner phenol , toilet cleaner liquid harpic , detergent powder surf 1kg or higher , scrub pad polyester , toilet cleaner brush , finish surface mounted door closer , table top , first aid box , soft bristle swiping gross broom normal jadoo , drain pipe multipurpose water drain pipe , axe , pick axe genti , garden rake datal as for user requirement , khurpi as for user requirement , aluminium ladder , water tabe , celling fan , wall fan , exhaust fan , cpvc plumbing pipe 2 inches , pen for conference training seminar , genuine artificial leather conference , synthetic leather bag , file folder , diary spiral , high tea , tea , hardbound diary , veg lunch packet , veg buffet lunch , mementos small , mementos large , plants medium , printed certificate , certificate folder , flowers bouquet photo copy paper 80 gsm a4 size, photo copy paper bond paper a4 100gsm, photo copy paper a3 size 80gsm, photo copy paper 80gsm legal size, tags less for files length 175mm, tags for files length 125mm, desktop calculator lcd led, file folder clear bag folder legal size, highlighter pen multicolour , stapler 24 6, stapler 10 4 , stapler 23 24, marker slim, marker slim, marker slim, gel pen blue uniball, //bid details 2 / 140

CTN :45500012

20 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For supply of bathroom or toilet mirror (v3) (q4) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , hydraulically regulated door closers conforming to is 3564 (q3) , tower bolts (non-ferrous metals) v2 as per is 204 (q2) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , curtain pipe, sider and mounting bracket (q4)

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

Plumbing Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors