Latest plunger Tenders | Government plunger Tenders

Central Government/Public Sector

CTN :45313275

04 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of depot ferrous scrap - released mixed ferrous scrap: cutting pieces of engine block, bull gear, scrapped bogie parts ( bss pin, yoke pin, anchor link, silentent block, bss pin, yoke pin, anchor link, silentent block, bss hanger, circlip, anchor link bracket, lower spring seat, bearing, break beam etc., ) megi side bearer, spring, coupler spring, condemned alternator, gear, break disc, after cooler, housing pump, casing, armeture, push rod, cylinder head, nut bolt, pipes, cbc and screw coupler, coupler head assembly, carrer plates front and rear, supporting device, buffer plunger, protective tube, bogie bracket, break beam, hook and clamp, knuckle, m.s.plate and other miscellaneous mix ferrous scrap. excluding steel and aluminium. note 1. re-punching with other lots will not be allowed. 2. lading will be start at 09.00 a.m. loading will not be allowed after 15.00 hrs.

State Government

CTN :45290539

08 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For hand pump spares parts isi mark and conforming to is 15500 2021 (part 1 to 8) (with up to date amendment) - prevailing torque type steel hexagonal nutm10x1.5 is:7002, ball bearing 20 bc02pp is:6455, bolts for cover m 12x20 is:1363, washer for axle to suit m-12 is:2062, high tensile bolt m-10x40mm is:1364 part-i, hexagonal bolt m12x1.75x40 is:1363 part-i, hexagonal nut m12x1.75 is:1364 part-3, hexagonal coupler m12x1.75x50 is:15500 part-4, long bolt m12x1.75x20 for extra deep well is:1363 part-i, reducer cap painted for mark ii & extra deep well hand pump i.s.i. mark - 0.880 kgs approx., cylinder body with brass liner for deep well pump isi mark. - 2.50kgs approx., cylinder body with brass liner for extra deep well and vlom pump isi mark. - 3.20 kgs approx., plunger yoke body for all types of pumps i.s.i. mark. -0.260 kgs approx., spacer for nitrile rubber pump bucket for all types of pumps i.s.i. mark.-0.210kgsapprox., follower for mark-ii deep well i.s.i.mark.- 0.280kgs approx., follower for extra deep pump i.s.i.mark.- 0.370kgs approx., check valve seat for mark ii & extra deep well i.s.i. mark.- 0.210 kgs approx., check valve for mark ii & extra deep well i.s.i. mark, rubber seat retainer for mark ii & extra deep well 0.080 kgs approx., lowerspacerforextradeepi.s.i.mark.-0.200kgs approx., chain with coupling for all types of pumps i.s.i. mark.-0.550kgsapprox., front cover hot dip galvanized for all types of pumps i.s.i. mark.-1.230 kgs approx., bearing spacer for axle for all types of pumps i.s.i. mark, third plate galvanized for all types of pump i.s.i. mark. -1.400kgs approx., connecting rod for all types of pumps i.s.i.mark.-2.7kgsapprox., washer electro - galvanized i.s.i. mark, stand galvanized normal isi mark ii & vlom i.s.i. mark.-17.900 kgs approx., stand galvanized telescopic for marks & vlom i.s.i. mark.-19.750 kgs approx., stand galvanized normal for extra deep well i.s.i. mark.-18.700 kgs approx., stand galvanized telescopic for extra deep well i.s.i.mark.-20.500kgsapprox., handle comprising handle bar, bearing housing & chain guide for mark ii & vlom i.s.i. mark, handle comprising handle bar, bearing housing & chain guide for extra deep i.s.i. mark, t bar for extra deep well i.s.i. mark, counter weight for extra deep i.s.i. mark. -12.00 kgs approx., water tank complete for mark ii deep well & extra deep well hand pump i.s.i. mark. - 7.80 kgs approx., head complete for mark ii & vlom i.s.i. mark.-10.220 kgs approx., head complete for extra deep well i.s.i. mark.-10.150 kgs approx., s.s. handle axle for all types of pumps i.s.i. mark.-0.350 kgs approx., s.splungerrodformarkiii.s.i.mark.-0.430kgs approx., s.s. plunger rod for vlom & extra deep well i.s.i. mark.- 0.470 kgs approx., rubber seating for upper valve for all types of pumps i.s.i. mark, pump bucket of nitrile rubber for all types of pumps i.s.i. mark, rubber seating for lower valve for mark ii & extra deep i.s.i. mark, sealing ring for mark-ii & extra deep well i.s.i. mark, head assembly complete with handle assembly, for mark ii & vlom isi mark., head assembly complete with handle assembly for extra deep isi mark, handle assembly complete for mark ii deep well & vlom pumps isi mark.-10.250 kgs approx., handle assembly complete for extra deep well hand pump isi mark. -15.350kgsapprox., cylinder assembly complete for mark ii deep well hand pumps isi mark.-6.10kgs approx., cylinder assembly complete for extra deep hand pump isi mark.-7.00kgsapprox., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve, spacer follower pump bucket & upper value seating for mark ii deep well hand pump consisting of isi mark spares., plunger valve assembly suitable for nitrile bucket comprising of plunger yoke body, upper valve both spacers, follower pump bucket & upper value seating for extra deep well hand pump consisting of isi mark spares., check valve assemb

Central Government/Public Sector

CTN :45289245

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1. nr-094966 accnh/rcf 2. wc-081342 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/10/0037. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45289246

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-nr-081086/ accnh /rcf 2-wc -081488 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/10/0038. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45174701

26 May, 2026 NA

Multi City - Kerala

Tender For auction sale of rolling stock - pl no. 98111061, condemned and over aged bg-8 wheeler icf coach no. special repair wgscn 054562 (year built 2005) without bogie in grounded condition with all available ferrous non-ferrous wooden fittings thereon but excluding the following rc and already removed rc items. mechanical rc items 1] buffer plunger and casing 4 nos 2] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 3] distributer valve complete full set 1 set, 4] main doors -4 nos 5] overhead water tank-4 nos 6] adapter for cut off angle cock- 4 nos. 7 ) cut off angle cock -4 nos. electrical rc items 1] alternator to regulator wire (copper)-1 kg. already removed rc items a) mechanical items 1] complete bogie arrangements including wheel sets 2 nos, 2] wearing piece( bronze) and plate 4 nos each.3] bogie mounted brake cylinder 4 nos. b) electrical items 1] bldc fan 400 mm-27 nos. 2]9w led lamp-26 nos. 3]2w night lamp -10 nos, 4] 9 w mirror lamp-2 nos, 5]mobile charger socket-18 nos. 6] regulator 4.5 kw- 1 no 7]vrla battery -13 nos. 8] battery tray- 4 nos. 9] rotary switch with panel board- 1 no. ds-8 no. 334551 dt 18.04.2026, custodian sse/c&w/pgt, location near pgt/memu shed.

State Government

CTN :45173727

28 May, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : ac coil capacitor bank switch cantrol coil, module for capacitor switch, tripping coil essun 30 volt dc, length of coil 40 mm , i.d 26 mm o.d. 50 mm resitance 3.3 ohm tolrance ± 0.1 ohm, weight coil 290 gram, tripping coil megawin 30 volt dc, length of coil 93 (with brass tube of 95 mm) id 16 mm o.d. 41 mm resistance 4.2 ohm tolrance ± 0.1 ohm weight coil 505 gram overall length with plunger 141 mm., tripping coil popular 30 volt dc., tripping coil rr ispat 30 volt dc., breather 5 kg., breather 3 kg., transformer cork sheet 10 mm., bhel make 11 kv top insulator., bhel make 11 kv bottom insulator., 33 kv insulating pull road 11 kv bhel make vcb., drive road 11 kv bhel., drive road 11 kv magawin.

Central Government/Public Sector

CTN :45302510

13 Jun, 2026 NA

Bangalore - Karnataka

Tender For supply of buzzer fixing screw slotted pan headed st2.2 8mm length self tapping screw. , cover ext batt fixing screw. , single switch to plunger body lotted pan headed st2.2 6.5mm length self tapping screw.

Central Government/Public Sector

CTN :45213070

01 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of spares for elecon make gearboxes of cooling tower fans - cam pn 70 ct16 gear box , plunger pn 71 ct16 gear box , threaded valve seat pn 73 ct16 gear box , steel ball pn 74 ct16 gear box , threaded plug pn 75 ct16 gear box , spring pn 72 ct16 gear box , cam pn 70 ct19a gear box , plunger pn 71 ct19a gear box , threaded valve seat pn 73 ctu200 , steel ball pn 74 ct19a gear box , threaded plug pn 75 ct19a gear box , spring pn 72 ct 19a gear box

CTN :45319065

04 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of 86640957 guide , 86640958 guide plunger rail , 86641541 rail side , 9635082 nut , 51641996 bearing ball , 86511045 bolt plow , 9604535 link connecting , 43362 nut , 414 block , 86640857 twine finger , 80756 pin split , 86640959 rail side , 86578266 bolt sher , 47577195 bearing pickup , 17 no. sher bolt , 13 no. sher bolt , 13687, 13621 bearing , 8509 bearing nxv rv

CTN :45072524

28 May, 2026 NA

Dimapur - Nagaland

Tender For bid to ras corrigendum : supply of prosthodontics lab materials e e - addition polysilicon putty light body three hundred to four hundred gm , firing tray ten zirconia alumina firing pins , metal firing pins , firing wool , glaze paste syringe of three gm for pfm , mockup wax shade ivory , ceramic separating disc diamond smooth of thickness zero point twenty five size twenty twomm pkt of ten , ceramic separating disc diamond smooth of zero point five mm pkt of ten , ceramic separating disc serrated of pkt of ten , daimond impregnated rubber wheel for ceramic polishing pkt of ten , ceramic technique system kit , carbon free wax marginal for all ceramic casting eighty gm , carbon free wax body for all ceramic casting eighty gm , investment powder for all ceramic press vest pkt of hundred gm , investment liquid ceramic press vest bott of thoushand ml , silicon casting investment ring with base former two hundred gm , silicon casting investment ring with base former hundred gm , alox plunger for all ceramic pkt of two , alox plunger separator bott of two hundred ml , emax ceram dentin powder shade a one bott of twenty gm , emax ceram deep dentin powder shade a two bott of twenty gm , emax ceram dentin powder shade a two bott of twenty gm , emax ceram dentin powder shade b one bott of twenty gm , emax ceram dentin powder shade c one bott of twenty gm , emax ceram dentin powder shade c two bott of twenty gm , emax ceram dentin powder shade c three bott of twenty gm , emax ceramic transperant enamel powder bott of twenty gm , emax ceram gingival bott of twenty gm , emax ceram impulse powder bott of twenty gm , emax modelling liquid bott of two hundred ml , emax ceramic glaze and stain liquid bott of fifteen ml , emax ceramic glaze powder bott of fifteen gm , emax ceramic essence of various shades set of six bott of one gm each sunset capuccino , diagen turbo grinder kit for all ceramic set of five burs , glaze paste syringe of three gram for pfm ceramic , hf etchant for all ceramic ivoclar , lithium disilicate pressable ingots ivoclar ips e max shade c three , lithium disilicate pressable ingots ivoclar ips e max shade b two , lithium disilicate pressable ingots ivoclar ips e max shade c two , gray elastic modules pack of thoushand

Plunger Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors