Latest ply board scrap Tenders | Government ply board scrap Tenders

Central Government/Public Sector

CTN :41118808

24 Jul, 2025 NA

Mysore - Karnataka

Tender For supply of vinyl stickers for destination board, belly board & coach indication board. note:- 1). vinyl stickers with retro reflective sheet in yellow and black letter, eco-s olvent, ultra-light and intensity grade, digital print and uv protect over laminate. 2). cont ent, size & design should be collected from the consigne before printing 3). make:-3m, lg or similar 4). one sample of each sticker to be approved before bulk supply. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41057451

22 Jul, 2025 NA

Sitapur - Uttar Pradesh

Tender For supply of decorative laminate sheet (q3)

CTN :41054526

02 Aug, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - as per sow; as per sow; service provider-work for augmentation of security accessories and fittings along with refurbishment in qrt room-1 supply & installation of customised double foldable bunk beds with thich pipe and heavy rod along with mattress (size: 6"*2.5"). to be fabricated as per site lay out/ space available. design drawing is to be approved by the buyer prior to production. to the scale autocad/3d view to be generated and approved by buyer. 3 nos, 2 supply & installation of customised 4 seater foldable wall amounted ply with lamination open both sides dining table (4'*2'). suitable back laminate matching with wall d cor is to be applied. the same to be customised based on avaialble space. 1 nos, 3 supply & installation of humidity control device - 1.5 ton, including accessories, stabiliser, mccb, outdoor stand 2 nos, 4 supply & installation of 50" inches cctv led display unit with wall mounted stand alongwith cabling from cctv recording room with required conduit with adequate digging for laying of pvc duct(approximate length 50 rmt) 1 nos, 5 supply of oak armless foladable/stackable plastic chairs (weight bearing capacity - 120 kgs) 4 nos, 6 supply & installation of personnel saniatry and hygienic items for bathroom and washplace based on site-visit. 1 job, 7 customised termite proof gypsum based roof ceiling to reduce heat by creatin an insulated space and minimizing direct sunlight exposure 1 job, 8 supply & installation of customised modular storage rack (6'*3') for qrt weapons, accescories with lock and chain and frontal transparent acryllic sheet, necessary stickering. 1 nos, 9 securing of all electrical cable including false ceiling down lighting, switches, concealed wiring for cctv line, dth, ac, telephone etc) 1 job, 10 supply and installation of exhaust and recirculation system for effective air cycle changing 2 nos 11 supply & installation of roller blinds for windows (06 nos) 150 sqft 12 supply & installation of hangers and metallic stoppers for rifles with plywood plus laminate in the backdrop. 1 job 13 supply & installation of customised wooden locker to keep f/f appliances with frontal transparent acyllic sheet and locking arrangement. 1 job, 14 painting of walls (inside roomk) including material. placement of qrt room tally with necessary illumination 1 job, 15 supply of customised wooden centre table (4'*2') with magazine holder. 1 nos.

CTN :41016007

30 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , thinner for cellulose nitrate based paints and lacquers (q3) , plywood bwr grade 1 of size 7 inch 6 ft x 3 ft x 12mm , decorative handle stainles steel 50 or 75mm long , mirror with frame for table dressing ladies fd 251 made out of timber wood with 6mm thick bwr grade ply and mirror of 5mm size 1220 x 366mm , tapestry cloth , teak wood rails of size 45 x 90x 1500 or 1800 duly french polished for table dining 6 or 8 pers complete , top of table centre of size 900mmx450mm x 400mm madeup of 18mm bwr grade i ply covered with 1 mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , mirror with frame for table dressing gents fd 230 made out of timber wood with 6mm thick bwr grade i ply and mirror of 5mm size 750 x 375mm , looking mirror for table dressing gents of size 600 x 375 x 5mm thick , pvc seat of size 455mm x 455mm 4mm thck with wight not less than 1 point 85 kg and grooves 90x10mm 10 nos on seat for chair verandah , top of table office clk of size 1200mmx600mm madeup of 18mm th bwr grade i ply covered with laminate sheet of approved shade and teak wood beading alround the top complete , top of table dinning size 1800 mm x 900mm for 6 pers of size madeup of 18 mm bwr grade i ply covered with 1 mm , long rail for bed hard fd-246of size , top of table of size 3 ft x 2 ft madeup of 18 mm th bwp grade i ply is 710 covered with 1 mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , top of teapoy of size 600mmx450mm made up of 18mm th bwp grade i ply is 710 covered with 1mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , top of teapoy verandah of size madeup of 18mm th bwp grade i ply is 710 covered with 1 mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , teak wood arms size 60mmh x25mm w for chair writing , fevicol 1 kgs make pidilite , french polish ready made 35 litrs pack , pvc seat 4mm thick size 430mmx 440mmm having weight not less tha 0 point 5 kgs each including groves 4 x 10mm rlbs moulded alongwith seat chair dinning jco ors , 1st class timber wood beading 25mm x 4mm thick , s s brass lock 4 or 6 lever for almirahs , 50mm dia heavy duty nyln wheel for chair revolving compuer , telescopic channel of size 18 inch , telescopic channel of size 20 inch , telescopic channel of size 12 inch , telescopic channel of size 14 inch , telescopic channel of size 15 inch , knobs brass ss 40mm fancy type , cloth malmal , top of table 3 ft x 3 ft of size 3 ft x 3 ft madeup of 18mm thick bwp gde a ply is 710 covered with 1mm thick laminate sheet of approved shade and teak wood semicircle beading alround the top , top of table writing of size 1145mmx600mm madeup of 18mm th bwp gradea is 710 ply covered with 1mm thick laminate sheet of approved shade and teak wood beading alround the top complete , castors wheel for chair revolving computer , bracket for chair all type , bracket for table all type , teak wood arms size 75mm h x 35mm w x 725mm l for sofa //bid details 2 / 33

State Government

CTN :40989663

19 Jul, 2025 NA

Bolpur - West Bengal

Tender For supplying of non scheduled miscellaneous items for rabichyya guest house (p-i) under bolpur municipality.-"bed with head board a. bed structure ( 72"" x 78"") base frame: rectangular platform with support underneath. mattress support: plywood sheet or slatted structure. legs or box base: can be a storage box or stand-alone legs.b. headboard fixed to the bed or wall-mounted. can be plain, cushioned, or designed with cnc cut panels.3. materials usedpart material thickness notesmain structure commercial or bwp plywood 18 mm or 19 mm bwp preferred for moisture resistancesupport inside plywood or hardwood batten 1""x2"" or 2""x2"" used for framing and supporttop panel plywood sheet 1218 mm for mattress baselaminate/veneer decorative finish 0.8 mm 1 mm for aestheticsedge banding pvc/wooden strips 0.452 mm to cover edges of plywoodupholstery (optional) foam + fabric 12 inch foam for cushioned headboards4. types of plywood recommendedtype grade usemr (moisture resistant) interior budget furniturebwr (boiling water resistant) moderate water exposure bedroom, semi-wet areasbwp (boiling waterproof / marine) premium long-term durability, ideal for beds5. design options headboard types:o plain ply with laminate/veneero upholstered (foam + fabric/leatherette)o cnc-cut mdf panel over plyo backlit designs (led strip behind panel) storage bed options:o hydraulic lift-up systemo drawer storage on sideso box storage with lids""bed with head boarda. bed structure ( 60"" x 78"") base frame: rectangular platform with support underneath. mattress support: plywood sheet or slatted structure. legs or box base: can be a storage box or stand-alone legs.b. headboard fixed to the bed or wall-mounted. can be plain, cushioned, or designed with cnc cut panels.3. materials usedpart material thickness notesmain structure commercial or bwp plywood 18 mm or 19 mm bwp preferred for moisture resistancesupport inside plywood or hardwood batten 1""x2"" or 2""x2"" used for framing and supporttop panel plywood sheet 1218 mm for mattress baselaminate/veneer decorative finish 0.8 mm 1 mm for aestheticsedge banding pvc/wooden strips 0.452 mm to cover edges of plywoodupholstery (optional) foam + fabric 12 inch foam for cushioned headboards4. types of plywood recommendedtype grade usemr (moisture resistant) interior budget furniturebwr (boiling water resistant) moderate water exposure bedroom, semi-wet areasbwp (boiling waterproof / marine) premium long-term durability, ideal for beds5. design options headboard types:o plain ply with laminate/veneero upholstered (foam + fabric/leatherette)o cnc-cut mdf panel over plyo backlit designs (led strip behind panel) storage bed options:o hydraulic lift-up systemo drawer storage on sideso box storage with lids""4. sofa (three-seater)description: size: standard 3-seater (approx. 72"" w 32"" d 34"" h) frame: solid wooden frame cushion: high-density foam seat & back cushions upholstery: premium fabric or leatherette (optional) legs: wooden or chrome-plated legs suitable for: reception/visitor areas""matress for bed (72"" x 78"")???? 2. mattress types (based on material):type features best forcoir mattress natural fiber, firm support, low cost budget buyers, back supportfoam mattress soft, lightweight, affordable guest rooms, short-term usememory foam adapts to body shape, pressure relief people with joint/back painpocket spring individual springs, motion isolation couplesbonnell spring bouncy feel, good airflow general uselatex (natural/synthetic) cooling, durable, hypoallergenic long-term use, luxury segmentorthopedic mattress designed for spinal support elderly, people with back issueshybrid mattress combo of foam + springs + latex balanced comfort & support________________________________________???? 3. mattress covering materials: knitted fabric: soft, breathable quilted cover: adds extra cushioning anti-dust/allergy covers removable zip cover (for easy wash)"

State Government

CTN :40989696

19 Jul, 2025 NA

Bolpur - West Bengal

Tender For supplying of non scheduled miscellaneous items for kashinath smriti community hall (p-i) under bolpur municipality.-, "bed with head board a. bed structure ( 72"" x 78"") base frame: rectangular platform with support underneath. mattress support: plywood sheet or slatted structure. legs or box base: can be a storage box or stand-alone legs.b. headboard fixed to the bed or wall-mounted. can be plain, cushioned, or designed with cnc cut panels.3. materials usedpart material thickness notesmain structure commercial or bwp plywood 18 mm or 19 mm bwp preferred for moisture resistancesupport inside plywood or hardwood batten 1""x2"" or 2""x2"" used for framing and supporttop panel plywood sheet 1218 mm for mattress baselaminate/veneer decorative finish 0.8 mm 1 mm for aestheticsedge banding pvc/wooden strips 0.452 mm to cover edges of plywoodupholstery (optional) foam + fabric 12 inch foam for cushioned headboards4. types of plywood recommendedtype grade usemr (moisture resistant) interior budget furniturebwr (boiling water resistant) moderate water exposure bedroom, semi-wet areasbwp (boiling waterproof / marine) premium long-term durability, ideal for beds5. design options headboard types:o plain ply with laminate/veneero upholstered (foam + fabric/leatherette)o cnc-cut mdf panel over plyo backlit designs (led strip behind panel) storage bed options:o hydraulic lift-up systemo drawer storage on sideso box storage with lids", "tea table with 8 mm toughned glass????? 2. materials breakdownpart recommended material notestable top 8 mm toughened (tempered) glass heat and impact resistant, safe if brokenbase frame plywood, mdf, metal, or solid wood structure and stabilitylegs/support metal (ms/ss), wood, or ply choose as per aesthetic industrial or wooden lookfinish veneer, laminate, pu, powder coat aesthetic outer layer on wood or metaledge rubber (optional) pvc/silicon edge lining for child safety or anti-slip finish________________________________________???? 3. standard dimensionstable size width x length height suitable formedium 24"" x 36"" (60x90cm) 16""17"" standard living room.________________________________________???? 4. glass optionsfeature descriptiontype toughened/tempered safety glassthickness 8 mm (standard); strong enough for daily useedge polished edge or beveled edgecolor clear, frosted, black, bronze, grey tintedshape rectangle, square, round, oval________________________________________????? 5. design optionsa. modern wood + glass wooden or plywood frame with clear glass on top legs in straight or angled form veneer or laminate finish for sleek lookb. metal + glass ms or ss powder-coated frame industrial or minimalist design can include a second glass shelfc. storage table drawer or open shelf below glass top great for books, remotes, coastersd. cnc/cut-out ply decorative cut-out panel under the glass enhances aesthetics through transparencye. floating glass design glass mounted on metal studs, appearing to float above base", "round tea table????? 2. materials breakdownpart recommended material notestable top 8 mm toughened (tempered) glass heat and impact resistant, safe if brokenbase frame plywood, mdf, metal, or solid wood structure and stabilitylegs/support metal (ms/ss), wood, or ply choose as per aesthetic industrial or wooden lookfinish veneer, laminate, pu, powder coat aesthetic outer layer on wood or metaledge rubber (optional) pvc/silicon edge lining for child safety or anti-slip finish________________________________________???? 3. standard dimensionstable size width x length height suitable forsmall 18"" x 30"" (45x75cm) 15""16"" (3840cm) compact living spacemedium 24"" x 36"" (60x90cm) 16""17"" standard living roomlarge 30"" x 48"" (75x120cm) 17""18"" spacious interiorsheight should be roughly level with your sofa seat height.________________________________________???? 4. glass optionsfeature descriptiontype toughened/tempered safety glassthickness 8 mm (standard); strong enough for daily useedge

State Government

CTN :41004068

23 Jul, 2025 NA

Rupnagar - Punjab

Tender For supply of wooden flush door shutters (solid core type) (q3) , decorative laminate sheet (q3) , magnet door catcher (q4)

CTN :40983962

22 Jul, 2025 2.93 Crore

Imphal - Manipur

Tender For providing of furnitures and kitchen utensils for eklavya model residential school (emrs) at laljuri and damcherra, north tripura, tripura. - knock down class room dual desk is specially designed for rugged use. the desk are made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with machine pressed pvc egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically . hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per indicative potographs attatched:desk top 18mm both side laminate(bsl) prelam partical board 400 mm wide bench top 18mm bsl prelam partical board 330 mm wide front shelf 18mm bsl prelam partical board 300(wide)mm.bench back 18mm bsl prelam partical board 250(w)mm.modesty panel 18mm bsl prelam partical board 300 (w)mm.supporting understrucure- left hand and right hand frame consisting of vertical, horizontal and cross member made up of 25 x 1.2 mm outer dia erw tube confirming to is grade 4932 and shall be finised with epoxy polyster powder coated finish with dft 50-60 micron confirming is 13871:1993. the support system of bench and shelf shall also made up of made up of 25 x 1.6 mm outer dia erw tube confirming to is grade 4932 and shall be finised with epoxy polyster powder coated dft 50-60 micron confirming is 13871:1993.. resting support plate made of table top , provided on the top of vertical members shal be made up of 3mm thk crca sheet conforming is-grade 4932. legs shall be fitted with pvc leveler. construction is fully welded with mig welding and assembled using m6 trilobularscrews(as per din 7500)with zn blue plating. compact top, seat and back panels are assembled using m6 countersunk trilobular screws(as per din 7500) with zn black plating (as per is 1573:1986)., dual desk :overall size 1100 (w) x 930-950( d) x 650 (h) - desk depth 390-400 mm. seat height 375 mm for classs 6-8), dual desk-(overall size 1100 w x 940-975( d )x 750 h - desk depth 400 mm. seat height 450 mm for classs 9-12), supply and installation of office table as per approved design and as directred by engineer-in-chargework top - work top shall be made 25mm thick pre-lam mdf board confirming to is 12406:2003 with post foming on front and back and machine pressed pvc egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides understructure- c-type leg shall be made of 50x50x1.6mm thick vertical member and 40x40x1.6mm thick m.s. pipe of horizontal/cross member confirming is-grade 4932shall be finised shall be finised with epoxy polyster powder coated dft 50-60 micron. legs shall be fitted to the ground with m8 screw leveler with the height adjustment up to 12mm to 15mm.cross members shall be mounted by end brackets made of 3mm thick is 513: 2008 crca sheet shall be finised with epoxy polyster powder coated dft 50-60 micron confirming is 13871:1993.wire management-electrical wires shall be carried from horizintal/ vertical duct made of 0.7mm crca sheet confirming to is 513:2008. switch plate or cromet depending upon requirement shall also be provided for electrical/lan connection on table top. modesty panel -modesty panel of height 450 mm shall be made of 1.5mm thick crca sheet confirming to is 513: 2008 and shall be finised with epoxy polyster powder coated dft 50-60 micron.storage body- storage top shall also be made of 25mm thick pre-lam mdf board confirming to is 12406:2003 with post forming on two sides and machine pressed pvc egde banding 2 mm thick glued with industrial adhesive and diffused with board monolithically on other two sides. the body of storage units shall be made of 0.8mm thick crca sheet and skirting shall be of 1.2mm thick crca sheet confirming to is 513: 2008 finished with epoxy powder coated of dft 50-60 micronconfirming is 13871:1993. internal shelves shall be also made up of 0.8mm crca sheet co

CTN :40830467

21 Jul, 2025 12.31 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for admin building, institutes and other buildings and otherphysical facilitys works at jitnagar ta. rajpipla. dist. narmada (package-3) - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying & placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 45010 mm(d) x 45010 mm(w) and back size shall be 45010 mm(w) x 40010 mm(h) from seat. overall height shall be 82010 mm, overall depth 53010 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is: 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., benches- supplying and placing three seater bench that shall be constructed from metal frame. the seat and back shall be made of high quality cold rolled ms sheet of 1.2m thick, pressed and welded to form the shape. the seat and back sha

CTN :40830509

19 Jul, 2025 12.64 Crore

Rajpipla - Gujarat

Tender For corrigendum : preparation, supply and fabrication at site of furnitures items for hostels, mess building and other physical facilitys works at jitnagar ta. rajpipla. dist. narmada package-1 - single bed- providing and placing in position single bed with an overall size - 2050mm (l) x 800mm (w) x 835mm (h) without mattress. the construction of the bed shall be supplied in knock down with metal frame made out of crca steel pipe having cross-section area 50mm x 25mm with 1.2 thick. 3 nos. of horizontal crca pipe shall be provide on head board 25x25x1.2mm. the mattress panel shall be made of 12mm thick waterproof plywood with main frame and mounted on crca square pipe strips having cross-section area 25mm x 25mm with 1 mm thick and 6 nos. equally placed at shorter side. the legs shall be made of m.s.e.r.w pipe having cross-section area 50mm x 25mm with 1.2 mm thick. all metal part shall be powder coating finish with dft(dry film thickness) - 35 min. the ppcp shoes shall be insert into bottom of legs for avoid skretches on the floors., study table - supplying and placing executive table in knock down condition with an overall size 1500mm x 750mm x 750mm that is to be assembled at site. the worktop shall be made up of 18mm thick waterproof plywoodwith both side laminate finish. the table top profile shall be in rectangle shape and the edges shall be sealed with 6 to 10 mm thick moulded teak wood beading patti with melamine polish that is cut to fit the size of board panel and to make 2 to 3 mm groove between board and bidding patti. the top shall be supported on crca rectangle pipe frame having cross-section area 40mm x 20mm with 1.6mm thick. the table understructure shall be made with 40mm x 20mm x1.6mm thick crca pipe. 1 nos. footstep shall be provided between both side leg with the same size i.e 40mm x 20mm x1.6mm thick crca pipe, study chair- supplying and placing visitor chair. the seat and back shall be made of 15mm thick hot pressed waterproof plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m in seat 40mm thick having density 32kg/m in back. the same shall be upholstered with fabric tapestry 1mm thick and 350 gsm. the frame structure shall be fixed cantilever supported type made up of crca chrome plated round pipe of dia. 15mm with 1.6mm thick. arm rest shall be made of double crca chrome plated round pipe of dia. 15mm with 1.6mm thick. there shall be ppcp shoe provided at the base to avoid scratches on the floor. the seat size shall be 450 10 mm(d) x 450 10 mm(w) and back size shall be 450 10 mm(w) x 400 10 mm(h) from seat. overall height shall be 820 10 mm, overall depth 530 10 mm., wardrobe - double unit- single shuttered double unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 900mm (w) x 500mm (d) x 1870mm (h). the cabinet shall be supplied with 2 nos. of separate doors, 4 nos. of adjustable shelf on each side. the doors shall be operated with aesthetically appealing snap fit powder coated metal handle and concealed crank hinge. the shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg maximum. each rack shall be provided with stiffener at bottom for strength. the entire body panel, shelf and door shall be made of high yield strength 1.2mm thick crca sheet of grade d confirming to is 513. to protect the ball from kicks, abrasion and serve as a decorative moulding skirting shall be provided at the bottom of the almirah. the complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to the thickness 40-50 thick., wardrobe - single unit- single shuttered single unit - providing, supplying and placing steel personal locker. the overall size of the almirah shall be 450mm (w) x 500mm (d) x 1870mm (h). storage shall have 4 nos. of adjustable shelf. the doors shall be opera

Ply Board Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government