Latest pneumatic screw driver Tenders | Government pneumatic screw driver Tenders

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45593539

24 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of 4/8 indent crimping tool micro crimp m/s rennsteig part no. 875000006 with 12 position locator m/s rennsteig part no. 87500453 suitabale for cable size 0.14 to 6 sq mm/awg 26-10 make:dmc/harting/rennesteig only [ warranty period: 30 months after the date of delivery ] ]

CTN :45594111

13 Jul, 2026 NA

Kolkata - West Bengal

Tender For hydraulic crimping tool consisting of hydraulic compression head and foot operated pump, suitable crimp connecting hose pipe, to crimp the cables of size from 25 sqmm to 400 sqmm, supply shall bewith complete standard accessories and crimping die sockets of sizes 25,35,50,70,95,120,150,185,240,300and 400 sqmm. make/model- jainson model no.varun-400 or similar model of ashwin, calter, dowells, sapsons or similar. [ warranty period: 30 months after the date of delivery ] ]

CTN :45572481

09 Jul, 2026 NA

Hyderabad-T - Telangana

Tender For supply of mil-std fischer connectors and accessories - mil-std fischer connectors & accessories, fischer socket connector, part no. dbp-105-a102-150, fischer plug connector, part no. sa-105-a102-150+, fischer cable clamp for mount plug, part no. e31 105.2/10.7+b:se, fischer plug contacts, part no. 200.2884, fischer socket contacts, part no. 200.2886, fischer crimp positioner 0.7mm for plug contact, part no. tx 00.304, fischer crimp positioner 0.7mm for socket contact, part no. tx 00.306, fischer contact insertion tool 0.7mm, part no. tx 00.210, fischer contact extraction tool 0.7mm, part no. tx 00.200, fischer crimping tool daniel mh800, part no. tx 00.240

CTN :45555632

06 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For crimping tool for ferrule, self-adjusting ratchet type, suitable for crimping insulated and uninsulated wire end ferrule in the range of o.25 to 4.0 mm sq. ensuring four-sided (square) crimp with automatic pressure control, compliance to iec60352-2, din-46228 as per attached annexure. make- wago model- variocrimp-4 part no. 206-1204, or knipex/germany model no.975304, or klauke/germany model-k3014k . note: the firm should submit proof of purchase from an authorised dealer along with the supply. [ warranty period: 30 months after the date of delivery ] ]

CTN :45544349

04 Jul, 2026 NA

Indore - Madhya Pradesh

Tender For low loss rf cable assemblies with flame retardant jacket , lmr-600 compatible rf connectors , installation tool kit compatible with lmr-600 crimp connectors

CTN :45498779

01 Jul, 2026 NA

Thumba - Kerala

Tender For supply of crimp tool, part number afm8 mil part number m22520 2 01 , positioner part number k41 mil part number m22520 2 06 , positioner part number k40 mil part number m22520 2 07 , positioner part number k13 1 mil part number m22520 2 08 , positioner part number k42 mil part number m22520 2 09

CTN :45470693

15 Jun, 2026 NA

Bareli - Madhya Pradesh

Tender For supply of 4/8 indent crimping tool micro crimp m/s rennsteig part no. 875000006 with 12 position locator m/s rennsteig part no. 87500453 suitabale for cable size 0.14 to 6 sq mm/awg 26-10 make:dmc/harting/rennesteig only [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45405637

23 Jun, 2026 NA

Bikaner - Rajasthan

Tender For supply of hand operated hydraulic copper cable crimping tool as per annexure a make:- crimp well, dowell or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45335651

17 Jun, 2026 NA

Bikaner - Rajasthan

Tender For supply of a set of hand crimp tool consisting of 06 items as per annexure -a. [ warranty period: 30 months after the date of delivery ] ]

Pneumatic Screw Driver Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector