Latest pneumatic tools scrap Tenders | Government pneumatic tools scrap Tenders

CTN :45304418

20 Jun, 2026 2.96 Crore

Bharathpur-Rj - Rajasthan

Tender For corrigendum : tender for supply of medical equipment required for setting up ultra burn care centre. - electro surgical unit/diathermy , skin graft mesher, , suction machine (heavy duty), , ot table (general surgery hydraulic (electric), , defibrillator biphasic, , steam sterilizer/autoclave, , burn treatment bathtub, , volumetric infusion pump, , syringe pump, , 15 (3 per bed), , electric dermatome, , multipara monitor, , icu ventilator advanced, , blood gas analyzer (abg), , video laryngoscope, , air mattress anti bedsore, , fully automatic icu beds, , over bed table, , ecg machine 12 channel, , flexible fiberoptie bronchoscope, , resuscitator hand operated adult, , resucitator hand operated pediatric, , crash cart, , instrument trolley, , automated vertical autoclave, , portable xray machine, , anesthesia workstation, , skin graft handle, , combo3 plus (tens+ift+ems+russina), , pulsed electromagnetic field (pemf) therapy, , ultrasonund therapy (1 & 3 mhz), , class iv therapeutic laser, , shockwave therapy (eswt), , air compression units for physiotherapy, ultrasonund therapy (1 & 3 mhz), , class iv therapeutic laser, , shockwave therapy (eswt), , air compression units for physiotherapy, , emg (electromyography biofeedback device), , height adjustable treatment table, , continuous passive motion (cpm), , motorized cpm-shoulder/elbow, , intelligent active-passive trainer (upper limb and lowe limb combined), , common sensorized rehabilitation gloves, , computerised pulley system, , digital gait analyzers, , quadriceps exercise chair, , tilt table (motorized), , shoulder wheel with magnetic resistance, , standard auxiliary crutch, , walkers, , elbow crutch, , wheel chair (detachable armrest & footrest), , hand gym kit, , exercise resistance bands/tubes, , balance board/wobble board, , theraputty & gel balls, , occupational therapy workstation, , foam bolsters & wedges (2 set), , kremer wire splint each set of 50, , contrast bath, , butterfly shape hydrotherapy tank, , hydrocollator (hot pack unit), , cold therapy (chilling unit)

Central Government/Public Sector

CTN :45470705

09 Jul, 2026 NA

Gandhidham - Gujarat

Tender For supply of permanent magnetic yoke (rope type) to carryout magnetic particle testing (wet and dry method) as per is:3703/2004. technical specification:1) lifting power: 20 kg or more with pole spacing 100mm. 2) magnetic field: constant level. 3) poles adjustment: 0- 300 mm. 4) tangential field strength: minimum value of 30 g. 5) equipment weighs not more than 400 grams. 6) necessary accessories. model: eeciflux permanent magnetic yoke model py- 1 or equivalent. note: item to be supplied along with calibration, test certificate and warranty certificate [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45090613

11 Jun, 2026 5.67 Lacs

Jhansi - Uttar Pradesh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; power house equipment, power generators, overhauling & servicing of fsss,sadc system,c&i field instruments(boiler,turbine, generator & cw system) and tur..

Central Government/Public Sector

CTN :45448250

26 Jun, 2026 96.00 Lacs

Cuttack - Odisha

Tender For tender for supply of seed bed preparation and sowing of rice nursery arrangement of seed samples for sowing in the nursery bed (up to 50) (detailed work mentioned in tender paper) , seed bed preparation and sowing of rice nursery arrangement of seed samples for sowing in the nursery bed (more than 50) (detailed work mentioned in tender paper) , field bund raising and side trimming of various width and height (both sides) , making bunds between sub-plot treatments and putting of plastic sheets/films for creation of barriers to prevent flow of water , fertilizer etc. , field leveling/laddering (after ploughing/puddling by using farm bullocks/hand levelling) , pot preparation (collection of soils , filling of pots up to 3/4th depth) of different sizes , preparation of tray (soil filling) and seed sowing transportation (tray size 30x18x15 inch) , preparation of pro-tray , sowing (96 well) and transportation of the tray for anaerobic germination fe zn deficiency screening at seedling stage evaluation , seedling , uprooting and line transplanting of rice 10 c.m. x 15 c.m. (uprooting of seedlings and making of bundles , carrying seedling from seed bed area to the planting place , line transplanting of single plant or two to three seedlings hill including rope holding) , seedling , uprooting and line transplanting of rice (upto 4 varieties)(uprooting of seedlings and making of bundles , carrying seedling from seed bed area to the planting place , line transplanting of single plant or two to three seedlings hill including rope holding) , seedling , uprooting and line transplanting (experimental plots) transplanting of rice in experimental plots where numbers of varieties to be transplanted 5 to 100 varieties breeding lines accessions in one plot (uprooting of seedlings and making of bundles , carrying seedling from seed bed area to the planting place , line transplanting of single plant or two to three seedlings hill including rope holding). distance of planting is to be maintained as per the direction of the indenter. , seedling , uprooting and line transplanting (experimental plots) transplanting of rice in experimental plots where numbers of varieties to be transplanted of more than 100 varieties breeding lines accessions in one plot (uprooting of seedlings and making of bundles , carrying seedling from seed bed area to the planting place , line transplanting of single plant or two to three seedlings/hill including rope holding). distance of planting is to be maintained as per the direction of the indenter. , direct sowing by seed drill in dry soil (both rice and non rice crops like green gram , black gram , soybean , cowpea , maize etc.) , line sowing with 3-5 seed/hill including rope holding (15c.m. x 20 cm) (upto 50 varieties/ breeding lines/ accessions) , line sowing with 3-5 seed/hill including rope holding (upto 100 varieties/ breeding lines/ accessions) , gap filling in transplanted plot/ resowing in the gap /thinning in experimental field of dsr plot , hand weeding in transplanted rice (once) , mechanical weeding with cono wedder (once) , weeding dsr/transplanted rice (twice i.e. 20 and 40 days after weeding) , weeding in non rice crops , cleaning and maintenance of irrigation and drainage channels , intercultural operation (soil loosening between rows , ridge formation etc.) in non-rice crops like groundnut and maize etc. , fertilizer application (once) , application of pesticides/ herbicide (broadcasting) in the experimental plots / farm field with proper personal protective equipment etiquettes to be provided by office , spraying of pesticides/ herbicide in the experimental plots / farm field (with proper personal protective equipment etiquettes to be provided by office) , irrigation (once) of experimental/ seed production plots (wherever irrigation pipe is required) , irrigation (once) of experimental seed production demonstration plots of 20m x 5m size , rice harvesting (manual) , bundling and carrying to the threshing

Central Government/Public Sector

CTN :45443243

20 Jun, 2026 NA

Delhi - Delhi

Tender For supply of audio recording and production equipment computer ,tablet computer ,audio interface for multi-track ,recording ,usb sound card ,hand-held ,recorder ,field recorder ,headphone distribution amplifier

Central Government/Public Sector

CTN :45436216

15 Jun, 2026 NA

Amla - Madhya Pradesh

Tender For supply of set of tools and equipment required for road art/brake down amla (details as per annexure). test certificate should be from nabl approved lab only. - unbranded cantilever tool box, 5 trays, tommy bar octagonal. size- 20mm x 600 mm long., material en8 as per attached drawing., hammer sledge double faced 3.2kgs is:841/1968 table-iii., ball pein hammer with handle conforming to is 841:1983 with latest amendments, specification: nominal mass-500 grams, handle- wood/polymer/fiberglass, material spec: steel grade t65/t70; handle length: maximum 350 mm but shall not be less than 300 mm., adjustable spanner 8", adjustable spanner 12", adjustable spanner 15", set of adjustable spanners & pipe wrenches of sizes 1) adjustable spanner size 10 inch/250mm qty/set-01 no 2) adjustable spanner size 15 inch/375mm- qty/set-01 no 3) pipe wrench size 24 inch/600mm- qty/set1no makes: fwrad0002-d & fwrrt0001-d of eastman or its equivalent of snapon, kingtony, taparia, or venus., wrench pipe chain capacity range 10 - 60,15-90,27 - 115,35-165, steel shovel with metal handle as per drawing number rwf/misc/m/1294, safety goggles designed to effortlessly fit over most prescription spectacles for convenience, temple adjustability enhances personalized fit and ergonomic, rigorously tested for optical quality, ignition resistance and high temperature durability, sterilized and fortified, ensuring technical durability and robustness, durable, clear, and scratch-resistant lens for precision optics and protection, lens scale no. clear:3-1.2, weight: approximately 54 grams, embodying lightweight precision in technical design, certified to en 166:2001 conforms to ansi 87.1-2010., accepted makes: karam es007 or black & dcor or 3m or midas or similar. accepted note: one sample to be got approved before bulk supply., magnifying glass with stand, lens size- 5", magnification- 4x area, 3.2 dioptre lens, reachstand internal concealed, spring mechanism with 900 mm reach from pivot and 600 mm in vertical plane reach from pivot 36" and 600 mm in vertical plane 24", illumination i) led ring with 40 leds in twin rings. ii) power consumption- 8 watts. iii) lumen output- 800lumens. iv) colour temperature-6000 degree kelvin v) nominal lux level at working plane 150 mm-2300 lux. along with accessories for each stand. i) increased magnification attachment dia -50 mm powerful additional lens that can swiung in the field view under the main lens. ii) spot lens dia-30 mm powerful additional lens that is permanently fused on the main lens to provide 16 x area magnification. brand- lensel optics model no - l104sd / greemito/toolstar, measuring tape with lock button size-5 meter (length) x 13 mm (width) case material-abs, blade material-carbon steel, case shape - round, tape colour-, black and white steel measuring tape 30 meter long graduated in mks & fps system to the fractions readable in mm & inch marking in full length of is certified company only, 15 cm spring steel scale, supply of manila rope of size 1 inch as per is:9936(1992). (note: required rope material is polymer braided twisted cord twine string in dia: 12mm) (required in 25mtr +25mtr sapratly), aluminum ladder 6 ft long, sand bucket, water bucket gi

CTN :45446753

22 Jun, 2026 57.77 Lacs

Bhiwani - Haryana

Tender For supply erection commissioning of electrical and mechanical equipment for dewatering of flood water from field area for village badesra outfall at rd 70600 l of jui feeder - estimate for supply, erection & commissioning of electrical & mechanical equipment for dewatering of flood water from field area for village badesra outfall at rd 70600-l of jui feeder in lift w/s (m) division, bhiwani - supply, erection & commissioning of 5 c/s axial flow water lubricated vertical pumps of 5 cs. discharge at 1440 rpm at static head of approx 8.0 mtr. with y body, including ms bend including flange welding, nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department, supply, erection & commissioning of fully automatic star delta starter suitable for 30 hp motor as per ip 54 with all allied item like mccb, contactor, rating 120 amp 90 amp, 50 amp, all type of protection relays (over voltage, under voltage, over corrent, singhle phasing preventor, delay siwtch ) correction capacitor, digital meter, bus bar, thimble etc suitable and all live parts should be covered as per site demand and compartment coated with epoxy coating as per approved technical specification of department. (including cable suitable for panel to motor).

CTN :45446757

22 Jun, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For estimate for supply, erection & commissioning of various electromechanical equipment like 5 no. 5 cs. vt pump, electric motors, starter panel and other allied material for flood protection works from the field area of village dang khurd & outfall at rd 65000-r of nigana feeder in lift w/s (m) division, bhiwani for the year 2026-27. - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

CTN :45450629

22 Jun, 2026 45.63 Lacs

Bhiwani - Haryana

Tender For estimate for supply, erection & commissioning of various electromechanical equipment like 3 no. 5 cs. vt pump, electric motors, starter panel and other allied material for flood protection works from the field area of village ghuskani & outfall at rd 8350-l of nigana feeder in lift w/s (m) division, bhiwani for the year 2026-27.

CTN :45452285

16 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of men s cotton knitted sports shirt / t-shirt conforming to is 4375 (q3) , socks (q3) , light weight web equipment as per defence specification (q3) , cap (field dress) (iaf) (q2) , field dress (jacket and trouser) (iaf) (q2)

Pneumatic Tools Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector