Latest pneumatic valve Tenders | Government pneumatic valve Tenders

Central Government/Public Sector

CTN :45125921

18 May, 2026 NA

Mumbai - Maharashtra

Tender For auction sale of rolling stock - condemned diesel loco no. 36157 wds/6 with iron steel and non-ferrous. restricted items: 1. complete bogie frame with wheel set, axel box and gear case = 01 nos., 2. 03 nos. of wheel sets with axel boxes without gear case = 01 nos. removed items: 1. pneumatic valve and air dryer = 01 nos., 2. radiator core = 01 nos., 3. came shaft = 01 nos., 4. extension shaft = 01 nos., 5. lube oil junction 01 and junction pipe 02 = 01 nos., 6. lube oil cooler pipe = 01 nos., 7. lube oil strainer, bottom pipe and cock = 01 nos., 8. steel balo and upper rode lower = 01 nos., 9. water tank = 01 nos., 10. fuel primary filter body and secondary filter body = 01 nos., 11. sensor loader balo = 01 nos., 12. tsc foundation plate = 01 nos., 13. bubble collector pipe ( z pipe, c pipe) = 01 nos., 14. water temperature gauge, pipe = 01 nos. 15. traction motor = 06 nos. remark: 1. restricted items to be returned to the stock holder in good condition by the purchaser at the time of delivery. 2. lot no. is painted on loco. 3. approach road is available up to lot. 4. hsd oil and lubricants if found to be returned to the stock holder. 5. locos are presently stabled at diesel shed kurla. after auction and before handing over, loco will be placed at cla yard for cutting and delivery purpose. purchaser is advised that loco will be placed only after certification of line by sse/pway/mnkd and as advised by sse/d/cla. 6. after purchaser submit all the documents and d.o after auction to dme/d/cla office, sse/d/cla in consultation with sse/p.way/mnkd will decide the date of placement of loco at cutting yard and only after handing over of loco will be done. 6. purchaser has to ensure safety of railway asset and his labour while working in railway premises. if any losses arise due to negligence, the purchaser will be fully responsible. 7. purchaser has to personally visit the site and see the lot. no claim will be entertained after sale of lot. 9. purchaser has to keep enough water/sand at the cutting site. 10.lot is ok for sale. qty : 01 number. location: presently stabled at diesel loco shed kurla. stock holder: dme d cla .

State Government

CTN :43768618

20 May, 2026 NA

Multi City - Telangana

Tender For corrigendum : supply of spares for recirculation valves of bfps and various control valves in turbine auxiliaries of ktps-v stage (2x250mw) - plug stem s/a (stem + plug + pin), for control valve sl.no. 952317 to 952320, 4”x2”,model:37-78103, 2500#, cv, act, size: 15” 6a3 moc: stem: st. steel 17.4 ph astm a 564 gr. 630,cond h 1075,plug:st.steel 440 c astm a 276 ty 440c, hardened , liner, for control valve sl.no. 952317 to 952320,model:37-78103, 4”x2”, 2500#,cv,act,size: 15” 6a3 moc: st.steel 17.4 ph astm a 564 gr. 630,cond h 1075 , spacer, for control valve sl.no. 952317 to 952320,model:37-78103, 4”x2”, 2500#, cv,act, size: 15” 6a3 moc: st.steel 17.4 ph astm a 564 gr. 630,cond h 1075 , plug stem s/a (stem + plug + pin) w/self teflon seal ring,for control valve sl.no:951541,tag:dm- 2,model:37-41512, cv,80nb,300class,overall length 440mm, bw moc :plug &stem: st.steel 17.4 ph astm a 564 gr. 630,cond h 1075 , teflon sealing ring,for control valve sl.no:951541,tag:dm-2,model:37- 41512, cv,80nb,300class,overall length 440mm,bw, moc:ptfe , body gasket, for control valve sl.no:951541,tag:dm-2,model:37-41512 cv,80nb,300class,overall length 440mm,bw moc: ss304+graphite(spiral wound) , seat ring for control valve sl.no:951542,tag:dm-5,model:37-41612 cv,100nb, 150class,overall length 444mm,bw moc: ss316+stellite no.6 , seat ring gasket/seat gasket for control valve sl.no:951542,tag:dm- model:37-41612, cv,100nb, 150class,overall length 444mm,bw moc: ss304+graphite(spiral wound) , plug+stem+pin,with self seal ring for control valve sl.no:951665,952226&952321,tag:dr-2,6,9 valve,model:37-41921, cv,80nb, 600class, overall length 444mm, bw moc: plug &stem: st.steel 17.4 ph astm a 564 gr. 630,cond h 1075 , seat ring gasket for control valve sl.no:951665,952226&952321, tag:dr- 2,6,9 valve,model:37-41921,cv,80nb, 600class, overall length 444mm,bw moc:ss304+graphite(spiral wound) , seat ring/diffuser seat for control valve sl.no:951665,952226&952321, tag:dr-2,6,9 valve,model:37- 41921,cv,80nb, 600class, overall length 444mm,bw moc:ss316+stellite no.6 , seal ring for control valve sl.no:951665,952226&952321, tag:dr-2,6,9 valve,model:37-41921,cv,80nb, 600class, overall length 444mm,bw moc:graphite , body gasket for control valve si.no 951668,dr-13&16 valves,model:37- 41921 cv, 100nb, class-300, overall length 444mm, bw, spares moc:ss304+graphite(spiral wound) , seal ring, for control valve sl.no:951668,dr-13,16 valve,model:37- 41921 cv,100nb,300class,overall length 444mm,bw moc:graphite , seat ring gasket, control valve sl.no:951407,tag:dr-25 valve,model:38- 41521 8”cv,200 nb,600 class, overall length 656 mm, bw, moc:ss304+graphite(spiral wound)

CTN :45118949

18 May, 2026 61.5 Thousand

Faridkot - Punjab

Tender For supply of gear lever top brg , oil seal , clutch cyl assy , door lock assy , gasket , pneumatic valve , ignition switch , ball bearing , head light bulb , self rocker plate , gasket cyl head , sa of pump coolent , sa of fule pipe feed hose flepible , master switch , blade assy wipper , wipper blade , fuel flexible pipe , oil pressure switch , regulator assy rh , hose brake rear , regulator , carbon bush set , hose piece , seal hub

Central Government/Public Sector

CTN :45117855

15 May, 2026 NA

Hubli - Karnataka

Tender For supply of pu pipe 6mm - polyurethane flexible air hose for lhb coach door mechanism to connect pneumatic valves and switches for automatic door opening & closing. [ warranty period: 30 months after thedate of delivery ]

Central Government / Public Sector

CTN :45117980

28 May, 2026 NA

Kazipet - Telangana

Tender For supply of set of ball valves suitable for bhel make traction converters. set consists of 2 items as follows. (i) 2 way ball valve with astm a351 gr. cf8 (ss304) investment cast body with ss304 ball, stem, gland, ptfe seats and seals and cs handle flange drilling as per ansi b16.5 std full bore class 150# single pc design. size/thread:25nb(1 inch).---10 nos./set. (ii) 3 way astm a351 gr. cf8 investment cast ball valve with ss304 t port ball, stem gland, ss304 nuts, ptfe seats and seals, cs handle, flange drilling as per ansi b16.5 std. with third side screwed end bsp thread. 2 seat single pc design class 150#hex plug in ss304 will be provided for iii side with buna- n 'o' ring ss304 extended pipe of length 135mm excluding male thread length and class 150# flange duly fitted to valve shall be provided. ss304 fasteners shall be used for valve fitting. size/thread:25nb(1 inch).---10 nos./set. make: kavaata valves or 2l engineers or equivalent. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45091838

01 Jun, 2026 NA

Ludhiana - Punjab

Tender For supply of molykote 55 silicon grease for air break system pneumatic valves 'o' ring & rubber components in 100 gm packing [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45091817

12 May, 2026 NA

Bangalore - Karnataka

Tender For supply of foot operated spring return 3/2 pneumatic valve to size 1/4 [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :45091192

09 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of "pneumatic valve to model no.554sa43bk0000(120/60) with base of m/s.emerson process management chennai pvt ltd. ]

CTN :45085070

16 May, 2026 NA

Patiala - Punjab

Tender For supply of gen driven shaft , push button , pneumatic valve , filter , nozzle assy fuel automising , valve , shim , hose 16mm , hose 25mm , hose

CTN :44972285

06 May, 2026 NA

Purnia - Bihar

Tender For bid to ras supply of bathroom or toilet mirror (v3) (q4) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , bathroom water shower (v2) (q3) , towel rail (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , floor drain traps (v2) (q3) , soap dish - case (q4) , ply wood 8 foot x4 foot x 12 mm thick 32 sqft , partical board 8 foot x 4 foot x 19 mm thick, 32 sqft , looking mirror 600 x 450 mm with frame , aluminium sliding door bolt 300mm long, 16mm dia , screw steel 50 mm , screw steel 25 mm , screw steel 75 mm , fevicol 1 kg , gi nails 25mm , alumn bow handle 125mm rod dia 12 mm , gi nails 50 mm , wooden beading of 20mm x 6mm x 8 foot , wooden beading for fixing glass 10x10x6mm , round plug wooden, 25mm , aluminium door stopper 100mm long with leg , alum bow handle 150 mm rod dia 12 mm , bracket for curtain rod ss , gi screw 20 mm, 25mm, 35mm, 50mm , stainless steel wire mesh 0.36 mm nominal dia of wire and width aperature 1.40 , plywood 8 foot x4 foot x4mm 32 sqft , screw steel 15 mm , putty 1 kg pkt , alumn sheet 0 point 5mm thick,1 mtr wide 24g , super flush strip 100 mm wide 10 mtr long , cp grating 100 or 102mm , reducing tee 25 mm x 20 mm , gi bend 15mm , gi nipple 20 mm x 80 mm , gi nipple 20 mm x 150 mm , gi reducing socket 20 x 25 mm , pvc handle for flushing cistern , tank cover pvc for 1000 ltr capacity , tank cover pvc for 500 ltr capacity , m seal , gi nipple 25 mm x 50 mm , ss robe hook , brass jumper washer for 15 mm bib tap , gi bend 20mm , hdpe grating 127 mm dia round , gi hook for pipeline , gi bend 25 mm , gi check nut 20mm , gi check nut 25mm , cp bottle trap for whb 32 mm dia , ms angle bracket for whb , drill bit for brick hole 4mm,5mm,6mm,8mm ,10mm //bid details 2 / 62

Pneumatic Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector