Latest pneumatic control unit Tenders | Government pneumatic control unit Tenders

CTN :45736941

27 Jul, 2026 NA

Bangalore - Karnataka

Tender For complete pantograph wbl 22.03. scope of supply- pantograph assembly with pneumatic control unit and valve plate assembly and insulators. make : schunk metal and carbon (india) pvt. ltd. of 54. whitefield road. mahadevapura post. bangalore-560046. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45731164

08 Jul, 2026 NA

Howrah - West Bengal

Tender For supply of high reach pantograph along with foot insulators and pneumatic control unit (pcu) to rdso spec. no. rdso/2007/el/spec/0054 rev. 3 amendment-1 along with add and ord features. icf drg.no.89116009 (item-29) shall be followed for mounting provision of high reach pantograph in coach roof, icf drg.no.89110016 (item-8) shall be followed for mounting of pneumatic control unitinside coach. necessary stainless steel mounting hardware, mating connectors shall be supplied. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45636157

03 Jul, 2026 NA

Karur - Tamil Nadu

Tender For annual rate contract for procurement of auto garage equipments spares- hourmeter 12v make:yenkey-electronics-615091020001, tc oil filter element - ek3246 elofic / pi 441800., master cyl. assy.(tandam)-p.no.:29066698, make:bi, wheel cylinder lh - part no. 64677953 -tvs girling, wheel cylinder kit - mi no.64967159,make: tvs-bt, universal joint kit-part.no.112007 - xlogwb/gogo / model gx 20, oil filter element for bolero jeep make: purolator - pi-170300 / pi - 530500, air pressure gauge - p. no. : 2150 make : pricol, engine oil pr. gauge ( 0-7 kg/cm2 ),make - pricol - p.no: 2017, ammeter - part.no. 4035 / 40005 make: pricol only, diaphragm p.no. : 843 310 make : tvs-wabco, spring - p. no. : m 843300 make : sundram clayton, seal assy p.no. m-841000 make: sundram clayton, elgi air horn asy.-make:elgi,model:std-p.no:s09101, unloader valve -m301910 hm - 81011976 make : s.c., radiator cap, small 7 lbs - part no.ho-103, make : hold on / sippy brass type, radiator cap - big size 69mm dia filler neck, shim for pinion nut 24v self motor 9030-896, pinion & bearing assy.24v 11 teeth - 9030-859 aa, clutch outer plate for 24v self motor 9030-951 a, clutch inner plate for 24v self motor 9030-876 b, pressure plate for clutch 24v self motor 9030-623, plunger assy for armature 24v self motor 9030-298a, field coil(main) for 24v self motor 9030-51, solenoid switch assy for 24v self motor 267-4a, field coil (aux.) for 24v self motor - 9030-52a, carbon brush for 24v self motor - 9030-644, brush carrier assy for 24v self motor - 9030-77, c.e. shield assy for 24v self motor - 9030-76, thrust washer for armature 24v self motor-9030-237, bearing bush for de shield p.no:9030-693 (:make: lucas-tvs / kirloskar/ menon), oil seal-de shield assy24v selfmotor9030-808pos3850, packing washer (namada)24v self motor 9030-1241 ( 1 packet consist of 50 nos ), field connector for solenoid 24v - 9030-932, positive connector for solenoid switch - 9030-930, moving contact for solenoid switch 24v - 9030-1190, horn assy 24 with condenser vibersonic 21 -v c/fht (make : roots ), point set-12v/ 24v roots make horn vibrosonic type, carbon brush for 8" remi coach fan (type: c.f.-20), regulator assy 24v alternator - p.no. 26938063 a, brush assy for 24v alternator 9030-340, brush box assy for 24v alternator 9030-315a, fan assy for 24v alternator 9030-683, heat sink assy (aux) 24v alternator 9030-1603b, heat sink assy.negative-24v alternator- 9030-1939, de shield for 24v alternator - 9030-1688 d, fixing screw for de shield alternator - 9030-382, wiper blade - 81001915 , battery terminal positive-brass, stp type, battery terminal negative make : shanco, stp type, regulator for 12v alternator - 26214575, bulb no 67,12 v, bulb halogen 12v-60/55w make:mico bosch no. 99510300041, pull & push switch - make : minda / hella long thread, ignition key switch - part.no. j-1019 - make : jay, starter button brass body with sealed rubber boot type - make :pricol ,part no: 3516, head light switch 24v- part.no. 6rd922504-make:pmp, head light holder - hp 1656 make: harson, head light assy. - part. no. : vsh-1431 / vsh-1432, make : vasko, 03 pin type, lucas type (02 nos. per set) ( make: anl-lux, mahindra di round: 81-5124), bulb 24 v-21w -pin type no:2441, bulb no.67, 24 v, allite p.no.t-711, bulb head light halogen 24 v 100/90 w collar type, electronic flasher unit - 24v - make: hella, copper ring terminal 50 sq.mm non insulated-7137, wire 4mm size: 32 / 0.2,max od : 1.95mm, finolex make, wires 5mm size:28/0.3, max od : 2.55mm, finolex-make, wires 6mm size:35/0.3 , max od : 2.75mm, finolex make, wires 8mm size:65/0.3, max od : 3.9mm, finolex-make, main bearing 010 u/s p.no:f0218210 make:bm copper, main bearing thrust washer(std-size) make: kir/ bm, tappet p.no: f4330022 make:al, connecting rod bearing-std size make:bimetalcopper, con. rod bearing 010 u/s, make :bm copper ., cylinder liner-hardened- 10 o/s make :liners india (1set = 6 nos), piston with pin and circlip (al - 401) make : ipl

CTN :45616394

25 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of pneumatic control unit complete for pantograph type wbl-22.03 of m/s schunk metal and carbon (i) pvt ltd no- 1-v15.16074 part no-909010007400. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45543217

25 Jun, 2026 NA

Malanjahknd - Madhya Pradesh

Tender For corrigendum : 313000370 bourdon pressure gauge, model: 4psssws2, range: 0 to 10 bar , 313000371 diaphragm sealed pressure gauge, model: 4 p d s s s w s 2, range: -760 mmhg to 0 , 313000372 differential pressure gauge, model: 4dpssws2, range: 0 to 1000 mmwc , 313000373 differential pressure gauge, model: 4dpssws2, range: 0 to 7 bar

Central Government / Public Sector

CTN :45556917

16 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For supply of pneumatic control unit (valve-plate) for wbl 22.03 schunk make pantograph as per schunk part no: 909010007500 or drg. no: 1.v15-15750. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45437294

16 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of pneumatic control unit (valve-plate) for wbl 22.03 schunk make pantograph as per schunk part no: 909010007500 or drg. no: 1.v15-15750. [ warranty period: 30 months after the date of delivery ] ]

CTN :45550711

29 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply of pneumatic control unit (valve-plate) for wbl 22.03 schunk make pantograph as per schunk part no: 909010007500 or drg. no: 1.v15-15750 [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45437292

13 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For supply of pneumatic control unit for wbl 22.03 schunk make pantograph as per schunk part no: 909010007400 or drg no: 1.v15-16074. [ warranty period: 30 months after the date of delivery ] ]