Latest pneumatic hose pipe Tenders | Government pneumatic hose pipe Tenders

CTN :43164437

22 Dec, 2025 NA

Raigad - Maharashtra

Tender For supply of pneumatic hose pipe for diaphragm valve

CTN :43182630

25 Dec, 2025 NA

Jorhat - Assam

Tender For supply of oxygen charging hose with both end adopter

Central Government/Public Sector

CTN :43225540

07 Jan, 2026 NA

Kamrup - Assam

Tender For supply of single cylinder manifold for dry air, nitrogen and oxygen gas service in the cylinder room at ground floor , single cylinder manifold for hydrogen and methane gas service in the cylinder room at ground floor , additional cylinder brackets for holding 47ltrs , point of use regulator with panel for gas service dry air, o2, n2 and h2 with accessories , point of use regulator with panel for gas service o2, n2, h2 and methane in the 2nd floor lab with accessories , hydrogen cylinder set up with cylinder bracket and cylinder mounted pressure regulator in nems laboratory at 2nd floor , point of use regulator at nems lab with panel having ball valve, outlet connection 6mm push fitting , single cylinder manifolds for n2 and dry air service for 2nd floor lab , point of use regulator in panel in the lab at 2nd floor for n2 and dry air with ball valve, outlet connection 8mm push fitting , tube laying with 1by4 inch od ss tube accessories, qty. in ft. , caping casing 2 inch x 2 inch for laying above tube , tube laying with 1by4 inch ss tube with 1by4 inch od tee 2nos, and accessories, qty. in ft. , caping casing 2 x 2 for 1by4 inch laying tube , tube laying at 2nd floor lab with 1by4 inch od ss tube with accessories, qty. in ft. , casing and caping size 2inch x 2ich for above tubing , tubing with 1by4 inch od ss tube with accessories , 8mm polyurethane tubing, qty. in ft. , pneumatic fitting straight union pu 8 push in connector for 8mm od hose

Central Government/Public Sector

CTN :43159136

23 Dec, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of oxygen gas hose bore diameter 8 mm , acetylene gas hose bore diameter 8 mm , oxygen gas hose bore diameter 10 mm , acetylene gas hose bore diameter 10 mm

CTN :43148281

22 Dec, 2025 NA

Dehradun - Uttarakhand

Tender For supply of scaler tip , oxy ball nose , oxygen flow humidity , uv tube , bp apparatus digital , high pressure hose 12mm , vaccum filter , air rotor hand pice , adopter charger , auto cut out compresor

Central Government/Public Sector

CTN :43152842

29 Dec, 2025 NA

Nagpur - Maharashtra

Tender For supply of oxygen regulator, two stage with stainless steel diaphragm, pressure gauges and hose connectors. input pressure 200 to 230 bar, outlet pressure 10 to 11 bar.

Central Government/Public Sector

CTN :43143720

22 Dec, 2025 NA

Chennai - Tamil Nadu

Tender For supply of welding hose with fluted cover for oxygen

State Government

CTN :42334379

22 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco - nshes - supply of certain consumables at nshes, nagarjunasagar. - fevicol sr-998 1kg, bearing grease, 1kg, molykote br2 plus, rustolene (in 1 litre cans), bearings grease of servo make (in 10 kg pack), asbestos cloth, 3mm thick, 1 mtr width, welding helments sigma brand, brush, paint. size:50 mm., length:2 inch, brush,paint, size:75 mm., length:3 inch, wire brushes, 5 rows, goggle: type:grinding, rod nylon, 20mm thick, pvc dotted cotton hand gloves, pressure gauge, 0-15kgf/cm2,4 inch, 3/8 inch bsp, teflon tape size: 12.5x12mtrs. x0.075mm, cutting wheels ag4, grinding wheel ag4, wheel, buffing, sponge, 6 inch x 3.5 inch x 2 inch, abrasive cloth, type:rough, material:emery, grit-36, size: 9 inch x 11 inch, abrasive, cloth, type:smooth, material:emery, grit-100, size: 9 inch x 11 inch, braided pvc flexible hose for air, id:12.5 mm, working pressure: 7.5 kg/cm2, nylon braided rubber hose,id-24mm,od-34mm, working pressure 15kg/sqcm, oxygen regulator, two stage with two gauges, make: esab, acetylene regulators, 2 stage with 2 guage, make: esab, neoprene rubber chord 10 mm dia, rechargeable torch light, 30watt, model:digi led dl30, make: eveready, nylon cable ties, size: 400 mm, tie, cable, nylon, size: 300mm, tie, cable, nylon, size: 250mm, tie, cable, nylon, size: 200mm, tie cable, nylon, size: 150mm, tie cable, nylon, size: 100mm, terminal block, porcelian, 2pin,6a, terminal block, plastic, 2pin,6a, copper lug, 1.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 1.5sqmm, fork type, with ins sleeve, for 4mm stud, copper lug, 1.5sqmm, ring type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 2.5sqmm, fork type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, fork type, with ins sleeve, for 4mm stud, lug,copper, 2.5sqmm, ring, pre insulated, double grip6mm, copper lug, 2.5sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 2.5sqmm, ring type, with ins sleeve, for 4mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 8mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 6mm stud, tape, electrical, type:insulation, material:pvc, color:red, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:yellow, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:blue, width: 18mm, length: 7 mtr, tape, electrical, type insulation, material:pvc, color:black, width: 18mm, length: 7 mtr, bolt,w/nut, spring and flat washer, ht gr. 10.9, m20x98 mm, half thread, bolt,w/ nut and sprig washer, ht gr. 10.9, m20x60 mm,full thread, bolt w/nut and spring and flat washer, ht gr. 10.9 m16x70 mm, full thread, bolt.w/nut and spring and flat washer, ht gr. 10.9 m16x45 mm, full thread, bolt,w/nut and spring and flat washer ht gr. 10.9. m12x40mm,full thread., bolt w/ nut and spring and flat washer, m20x80 mm, ht gr.10.9, half thread, dye penetrant testing (dpt) kit containing cleaner, penetrant and developer, pack of 03 nos., chloroprene rubber o-ring cord. dia:6 mm, length: 10 mtr., chloroprene rubber o-ring cord, dia:8 mm, length: 10 mtr., fuse hrc 32a, 500v ac, din, s-00, make: siemens, fuse hrc 63a,500v ac, din, s-00, make: siemens, fuse, hrc, 200a, 500v ac, din, s-00 make: siemens, terminal block, bakelite, 2 way,6a 230v, terminal block bakelite 3 way 16a 415v, terminal block bakelite 4 way 30a 415v, terminal block, porcelian 3 way,164,415v, nylon rope diameter: 12mm, colour: yellow/white type: braided, length: 100 meters roll, gas cutting hose (red). (1 no may be read as 1 meter), gas cutting hose blue (1 no, may be read as 1 meter), socket countersunk head cap screw, m8x20 mm. allenkey size: 5mm make: unbrako (part no. 103340)

State Government

CTN :43116368

12 Jan, 2026 11.39 Lacs

Lucknow - Uttar Pradesh

Tender For supply of speed sensor , speed indicator cum recorder , speed indicator , engine rpm meter , engine rpm cum hour meter , a-9 auto brake valve , sa-9 brake valve , solenoid coil for trans. direction shift pneu. valve , relay 11 p with base , toggle switch 2 w , pressure switch set to close at 8 kg per sq. cm open at 7 kg per sq. cm , rotatory switch transmission direction selector , rotatory switch range selector , dc mcb 16 amp , dc mcb 6 amp , digital fuel level gauge , cab isolating cock , loader unloader valve , brake shoe l type , complete headlight assembly with bulb , battery 88 ah, 12 volts for platform of cmv , 4 pin engine rpm sender magnetic pulse unit mpu , air reducer valve , cylinder piston , pneumatic hose pipe 19 mm dia 15 psi 5 metres length with complete both end fittings , pneumatic hose pipe 19 mm dia 15 psi 4 metres length with complete both end fittings , pneumatic hose pipe 19 mm dia 15 psi 3 metres length with complete both end fittings , solenoid valve , dc mcb isolator , transmission filter

Central Government/Public Sector

CTN :43081658

27 Dec, 2025 NA

Mumbai - Maharashtra

Tender For notice inviting tender for annual rate contract for supply of hose and hose clamp at rcf trombay unit - hose clamp, size: 3". worm drive type. moc: ss304, conforming to is 4762 (latest rev.), make: klipco/ equivalent., hose clamp,size: 2",worm drive type,moc: ss304, conforming to is 4762 (latest rev.),make:klipco/ equivalent., hose clamp, size: 1",worm drive type,moc: ss304, conforming to is 4762 (latest rev.),make:klipco/ equivalent., hose pvc,size:3/4" id x 2.5 mm thickness, conforming to is 15265(2003),moc:pvc,nylon wire braided between 2 layers of pvc,flexible transparent, working pressure: 7 kg/cm2,make: billion / duplon / dunoflex or equivalent, hose pvc,size:1" id x 3 mm thickness, conforming to is 15265(2003), moc: pvc,nylon wire braided between 2 layers of pvc,flexible transparent,working pressure: 5 kg/cm2, make: billion / duplon / dunoflex or equivalent, hose pvc,size:2" id x 6 mm thickness, conforming to is 15265(2003), moc: pvc,nylon wire braided between 2 layers of pvc,flexible transparent,working pressure: 5 kg/cm2, make: billion / duplon / dunoflex or equivalent, rubber hose, size: 5/16" id.,conforms to is 447 std(latest rev.), service: oxygen gas for industrial welding,colour - blue, make:duplon / iol or equivalent, steam hose,size: 3/4",3 ply, double wire braided suitable for steam working pressure of 12 kg/cm2 & temperature 200 deg.cent.conforming to is 10655 & bs 5342..., steam hose,size:1",3 ply,double wire braided suitable for steam working pressure of 12 kg/cm2 & temperatur 200 deg. cent., conforming to is 10655 & bs 5342..., hose clamp, size: 1/2",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose clamp, size: 3/4",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose clamp,size: 1",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco/ equivalent., hose clamp,size: 1.5",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose clamp, size: 2",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose clamp, size: 3",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose pvc,size:1-1/4" id x 4.5 mm thickness,moc: pvc,nylon wire braided between 2 layers of pvc,flexible transparent,working pressure: 5 kg/cm2, make: billion / duplon / dunoflex or equivalent, hose clamp, size: 2-1/2",worm drive type,moc:galvanised iron, conforming to is 4762 (latest rev.),make:klipco / equivalent., hose pvc,size:1" id x 4.5 mm thickness, conforming to is 15265(2003),moc: pvc,nylon wire braided between 2 layers of pvc,flexible transparent,working pressure: 5 kg/cm2, make: billion / duplon / dunoflex or equivalent, hose pvc,size: 3" id x 6mm thickness, conforming to is 15265(2003),moc: pvc ,nylon wire braided, suitable to withstand vacuum of 600mm hg & temperature of 70 deg c..., hose clamp, size: 1.5",worm drive type,moc: ss304, conforming to is 4762 (latest rev.),make:klipco/ equivalent., p.v.c.hose pipe with reinforemont suitable for 5 kg/mc2 size : 1 1/2" ., pvc hose 1/2" i.d. suitable for 6 kg/cm2 nylon rein ced

Pneumatic Hose Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector