Get complete information related to latest Pneumatic Motor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Pneumatic Motor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Pneumatic Motor Tenders.
Tender For auction sale of depot non ferrous scrap - p.l. no. 98210210 condemned and unserviceable copper scrap consisting of main field coils, inter pole coils, armature field coils, eddy current clutch ( ecc) rotor coil of sorts and sizes with insulations , without ferrous cores of traction motors , traction generators , traction alternators and auxiliary generators. as is where is basis.
Tender For 1)inspection of stator coil for identification of exact no. of the faulty coil and setting up the arrangements for rotor pole coils removing and rotation as per scope of works along with supply of materials and other consumables as per scope of works2)de-brazing the rotor pole terminations and removing the rotor poles (as required). dismantling of rotor poles using suitable and compatible tools, fixtures, and lifting arrangements. ensure safe handling and proper marking for reassemble. rotate and position the rotor appropriately to access the damaged stator coil area.3)remove insulation from both ends of the affected winding section.4)de-brazing of defective coils. 5)driving out the slot wedges carefully remove wedges from stator winding slots without damaging adjacent coils or core.(entire stator winding shall be inspected in case of loose wedges, worn out wedges and missing wedges shall be replaced) along with supply of materials and other consumables.6)insulation removal- remove insulation from both ends of the affected winding sections.7)cutting the coil bindings in both sides. cut the identified damaged winding portion using appropriate tools. carefully pull out the damaged coil from the stator slots without affecting surrounding windings.8)damaged winding cutting- cut the identified damaged winding portion using appropriate tools.9)winding extraction- carefully pull out the damaged coil from the stator slots without affecting surrounding windings. while removing the faulty coils from stator, utmost care should be taken to prevent any damage to stator core.10)removal of faulty coils from the slot.11)slot cleaning and preparation-clean stator inner tooth slots thoroughly. use emery paper to smoothen and maintain uniform slot condition.12)cleaning of carbon deposits/heavy oil content from complete stator coils through co2 cleaning process /dry ice blasting.13)new coil installation-insert new stator coil with proper alignment. fix securely using new wedges of appropriate grade and size.14)brazing of the coil ends.15)re-fixing the rotor poles and connecting them.16)insulation application-apply insulation as per specified class (e.g. class f/ classh). ensure proper curing and finishing.17)complete co2 / dry ice cleaning of stator and rotor.re insertion of removed rotor poles. 18)final checks & testing- insulation resistance (ir) test, high voltage (hvdc) test, continuity check, visual inspection and any other tests which are required (will be carried out by kpcl).19)assembling of removed damper doors and stator covers.20)maintain quality standards throughout the process & use calibrated tools and approved materials.21)presence of the agency during excitation and synchronization of the unit by kpcl.22)safety & quality-follow all safety procedures and ppe requirements
Tender For supply of bid no 3 e e - spring brake chamber , air dryer assy , rotor assy , 2-pole isolator switch , regulator brush box assy , brush carrier assy
Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous and miscellaneous, material consisting of s&t, p way, works and ohe items c & w items- such as ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and all other types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rods angle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, rubber items ,spring plank, pantograph with or without pneumaticmotor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley, rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various types sleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk light weight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, light weight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes, g.i. buckets, plastic, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan, frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine, electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate, step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component and wiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins, screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle box housings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, longer hanger, spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers, compressor spares, tension rods bushes, dash pots, ms& wi turning borings cut, collars, vehicle spares, ci items consisting of rusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pig irons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds, ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic, mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, parts of point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler, knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, and assorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. center, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silent blocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail, of sorts and sizes with or without parts fittings and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. wooden and railway track shall be excluded from the lot if found any.digging will be permitted only
Tender For auction sale of depot ferrous scrap - lot no.m.ci-1.exmp.g.04.26-27.01 description- scrap cast iron gr-i (clean casting readily or easily broken up for foundry use), cast iron gr-ii (unclean casting i.e. m.s. and other attachments or burnt heavy casting or easily broken up for foundry use). (our offer) miscellaneousllaneous signal items i.e. trestle top and bottom roller, lock facing point, rotor, signal pole & post, plain roller for mod dfr, ci brake block, angle cock, point machine and other miscellaneousllaneous ci items with or without little nf attachments as in the lot. materials lying in one place at "g" sector. before bidding, bidders are requested to inspect the lot. loading will be done by purchaser's own arrangement.
Tender For corrigendum : supply of auto electrical spares d d -armature , solenoid switch , field coil 6 , drive assy. , brush plate , carbon brush , bush for nose housing , bushing lever , bushing ce frame , nose housing , hsg lever , frame c. e. , term plate assy , contact assy , term or stud motor , stud , pole screw , bushing package or insualtion for field terminal kit , seal oil lever side , insulator for brush plate assemby , insulator for field coil , washer break , washer thrust , shift lever assy , lead ce term to solenoid , gasket ce inspection plug , pole shoe , wick - ce frame , wick - nose housing , shaft lever , o-ring ce frame , o-ring , o ring , cup plug , retainer - plunger top side , plunger , space washer - de side , nut and washer for field terminal , screw for nose housing attach , field coil , drive assy 12te , switch soleniod , brush plate assy , brush carbon , lead ceterm , housing lever , bushing ce housing , bushing - lever housing , bushing- nose housing , contact , stud battery terminal , lever shift , insulator - field terminal , insulation ce term , screw washer assy , ce housing , plunger , connector , insulator , o ring , oring , brake washer , screw and washer assy - ce housing atatch , wick -ce housing , wick -nose housing , insulator field coil ce side , housing rectifier with bearing , race for roller bearing inner , frame d. e. with bearing , regulator , diode , rectifier bridge assy , field coil support , rotor assy , stator assy. 75 a , fan assy , end cover , retainer plate , bushing for rectifier housing , battery terminal , relay terminal , term package , service package - hardware kit
Tender For corrigendum : supply of bare pump jaguar part no 335027 , pneumatic lower repair kit part no 344555 , pneumaticmotor repair kit part no 344666 , pneu solenoid valve part no 350006 , jaguar pump station assy 27 kg part no 350270 , seven bank injector with manifold part no 400122 , eight bank injector with manifold part no 400124 , ten bank injector with manifold part no 400123 , follower plate part no 350503 , level indicator rod part no 350504 , fm01 injector part no 400100 , zerk fitting part no 400127 , injector cap and o ring part no 400128 , fm 01 injector repair kit part no 400175 , pneu vent valvepart no 400400 , pneumatic vent valve repair kit part no 400475 , lubrication controller lc 02 part no 400702 , wire harness 6 mts part no 400704 , hose sae 100 r2 1 2 x 3800 mm part no 507771 , hose sae 100r2 1 2 id part no 507772 , hose sae 100 r2 1 2 x 2500 mm part no 507773 , hose sae r2 100 1 2 x 3400mm part no 507774 , hose sae 100r1 1 2 x 4200mm part no 507775 , air hose r6 1 4 x 4000 mm part no 507776 , lhs hose poly kit incl end fitting part no 577701 , rhs hose poly kit incl end fitting part no 577711 , rear hose poly kit inclend fitting part no 577720 , ddr part no 600013 , pressure gauge 0 to 400 bar part no 600016 , air filter regulator unit frl part no 600020 , quick release coupler part no 601001 , polyamide hose 8pont4mm od 4mm id 50m part no 801001 , jaguar head repair kit part no 344888 , needle part no 400406 , seat valve part no 400404 , hose studpart no 600004 , hose sleeve part no 600005 , elbow we 1 8m npt x 7 16 unf m part no 600119 , straight ge 1 4m npt x 7 16 unf part no 600310 , extension adaptor 1 8m x 1 8f 15mm part no 600202 ) /bid number: gem/2026/b/7264765 * /dated: 02-03-2026 & & / bid document1 / 37
Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items-suchas ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. andallother types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks,rodsangle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank,pantographwith or without pneumaticmotor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt barsrods, pulley,rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet,various typessleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junklightweight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter,lightweight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort andsizes,g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle,pan,frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighingmachine,electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, footplate,step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their componentandwiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings,pins,screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axleboxhousings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, etc. longerhanger,spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspensionlevers,compressor spares, tension rods bushes, dash pots, collars, vehicle spares, ci items consisting ofrusty and dustydrainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pigirons pieces,signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds,ms rack,almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic,mica, foamseat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, partsof pointmachine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler,knuckles,cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, andassorted cutpieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer raceof bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fanarmatures, chain sling, rev. centre, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silentblocks, cutpieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail,of sorts andsizes with or without parts, fittings, and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found willnot be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. excluding items -rubber/wooden /plastic/ material and shed.
Tender For auction sale of depot ferrous scrap - 98050114 scrap release all types of railway ferrous material consisting of s&t, p way, works and ohe items c & w items- suchas ms, gi, ci containing signalling units, rods, junction boxes, panels, ms gi structures, ladders, mast, rtu, cb, etc. and allother types of signaling items, gear case, the ground connection, ohe fitting, ms chains, heavy structure almirah/racks, rodsangle, top housing, road bar, glude joint, ground connection channel, pipes, lc material, ladders, jali, spring plank, pantographwith or without pneumaticmotor, gate, door, brake cylinder, tie bar, fencing, trolley, ms machines etc., tmt bars rods, pulley,rib cage, point machines without motors, wagon body cut piece bogies side frame, machines, sleeper, ms sheet, various typessleeper part, tie bar, fencing bars, i-beam, damaged empty drums, light fittings, rail & rail pieces, ms wires, junk lightweight/corroded material consist of toughened sheets, m.s./gi sheets, grease seal, drum, wire, parts of rolling shutter, lightweight cuttings, various damaged and rusty drums filled with coalter, dry paint, mud and dray fo if any of sort and sizes,g.i. buckets, steel buckets baskets, signal lamps, duct, vent pcs., fencing and pipes, wire mesh, stretcher, bicycle, pan,frames, electrical fittings, t.l. fittings, grill- jali, cabinet frames, rack ballast, rusted body and parts of weighing machine,electronic/electrical material, small rods angle, battery boxes, tool boxes, shovel, rail door handles, main door, foot plate,step plates, bench pipes, typewriter g.i. pipes, trolleys, water tank bond, location box with or without their component andwiring fittings, trolly, different type of ohe bonds of rail and other various ms fabricated structures, break load rings, pins,screw, bolts, spikes, keys, loco parts, stay rods, sleeve for centre pivot, pantograph parts, palm pull rods, lever, axle boxhousings, air motor, springs of pantograph, connecting rods, and other rods, rear cover of axle box housing, etc. longer hanger,spare parts of spt machine, pipe fittings, end shield covers, break beam hangers, brake shoe, vertical lever, suspension levers,compressor spares, tension rods bushes, dash pots, collars, vehicle spares, ci items consisting ofrusty and dusty drainage pipe, valve, meter, brake block, pulley, motors body, pipes, plates, d.v, vacuum cylinder chamber, pigirons pieces, signaling box ohe fittings, steel furniture consisting of chairs, tables, g.i. separation sheet, chair , stretcher, beds,ms rack, almira, other types of steel furniture of sorts and sizes, broken, damaged with or without wood, cushions, plastic,mica, foam seat attachment, parts brake liner, thrust bearing, spring, yoke, insulation block hangers, slides, locking rods, partsof point machine, a b cover, break head, cylinder head, pcs. of break beam, protective tubes, and other p-way fittings, coupler,knuckles, cp top/bottom, pu pad, narrow/wide jaw adapter, released bulk head components, wagon doors, cutting plate, andassorted cut pieces thereof, fabricated from irsm 44, etc. brake cylinder, cs & ci if any. valve, broken pcs. of bearings, inner and outer race of bearings, spares of break valve, trolley wheels, clamps, bmbc parts, pump shafts, impellers, tension device parts, fan armatures, chain sling, rev. centre, hooks, spares of trucks, accessories of transformer, fish plates, hooks, silentblocks, cut pieces of plates, doors, angles, etc., fasteners such as bolts, nuts, and other related misc, etc., with or without, rail,of sorts and sizes with or without parts, fittings, and minor non-ferrous attachments, unserviceable. if any non-ferrous material is found will not be delivered and retained by the custodian. minor/negligible nf attachment may be allowed. excluding items -rubber/wooden /plastic/ material and shed.