Latest pneumatic pipe Tenders | Government pneumatic pipe Tenders

Central Government/Public Sector

CTN :45547643

03 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of 60-62 hp, 3 phase submersible pump energy efficient, 2860 to 3000 rpm, 03/04 stage, discharge: 2016 lpm (max.), head: 70-80 meter, rated current: 85.5 a (max.), efficiency: 58%, outlet: 125 mm, suitable for 6 inch dia 3 mtrs column pipe, with threaded ms flange should have tight in both threaded ends of column pipe, thickness of flange 1/2 inch each ms flange should have 8 nos 5/8 inch dia holes & suitable ms reducer or expander with the pump. make- ksb pumps ltd or similar [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45549582

02 Jul, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of parallel thread reducer (ms) for pneumatic pipe fitting size 3/8''x3/8'' as per abb drg no 182-00424-008. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45546760

23 Jun, 2026 NA

Multi City - Multi State

Tender For supply of pu pneumatic pipe 6mm (od 6mm and id 4mm). with working pressure 10 kg/cm2 and above. accepted make: festo, janatics, smc and aasons. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45521518

23 Jun, 2026 NA

Murshidabad - West Bengal

Tender For supply, delivery at site of upvc column pipe and other electro-mechanical items at nagar pwss under medb, phe dte.

State Government

CTN :45520196

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33kv rewan bay with supply of material, integration and remote gateway work at 220kv ss bangra under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

State Government

CTN :45520197

25 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For erection of 01 nos 33 kv birdha bay with supply of material, integration and remote gateway work at 220kv ss birdha under etd jhansi - erection of following different type main and auxiliary structur, columns, beams, peaks, masts ets. suitable for placing of kv equipments., main structure & auxiliary structure., erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material / equipments from sture to erection site including all other associated work to complete the job satisfactorily., 36kv v.c.b., 36kv bi, 36kv li, 36kv ct, ct junction box, cutting. strenghtening. bending. laying 700mm. below in side ground and above ground og following size of ms flat for earthing of main and auxiliary structure. equipment structure t/f body and its material etc. including welding with main earth mat and with object to be earthing / excavation of trenches its back filling., 75x10mm ms flat, 50x6mm ms flat, 25x10mm ms flat, provinig, fixing & installation of glow sign board (as per sample) of size 8ft x 6ft for updated substation single line diagram duly checked & verified by concerned ae, to be fixed in control room building of substation with all other associated work to complete the job satisfactorily as per drawing and technical specn. of upptcl, the glow sign board illumminated using led tube light in sufficient quantity. the board shall be made of acrylic sheet of suitable thickness and color and shall be provided with back support frame & fixing arrangement with wall., interconnection of equipments and bus bar including cutting. bending of conductor and jumping, clamping along with all other associated work to complete the job satisfactorily as per drawing and technical specn., equipment jumper with 1xmoose, 10mtr, 33kv, bus bar jumper with 1xmoose, 10mtr, 33 kv, 6m, laying of following sizes of control cable in the cable trench from control relay panel to various equipments / marshalling boxes and jb etc. in switchyard as per cable schedule., 2c x 2.5 sq mm. unarmoured., 4c x 2.5 sq mm. unarmoured., 6c x 2.5 sq mm. unarmoured., termination of 2cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 4cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., termination of 6cx2.5 sq.mm unarm.ctrl.cable at both end. as per cable schedule., preparation of cable schedule and case interconnection diagram in between relevant panel,cb,ct,pt,etc.., providing and fixing of led street light luminaries, single piece aluminum body suitable for 120 watt having lumen output not less than 10,000 nom on 9 mtr. long stp/substation main structure column with g.1. pipe bracket complete in all respect cat. a philimps bajaj/ crompton/havells or equivalent make including cost of g.1. pipe brackets and all related accessories., supply, supply of single tension fitting suitable for acsr moose as per sample, supply of single suspension fitting suitable for acsr moose as per sample, supply of 33kv ct clamps suitable for acsr moose as per sample, supply of 36kv isolator jaw as per sample, supply of copper bond 16x500mm, supply of 33 kv isolator clamps suitable for acsr moose as per sample, intregration & remote gateway work, supply of required material with installation and intregration of new 33 kv line control & relay panel with iec -61850 compliant ied with existing automation system and addition of bay into remote gateway & data validation work.

CTN :45318506

15 Jun, 2026 NA

Bangalore - Karnataka

Tender For bid to ras supply of engine valve door packing kit , valve door bolt set , engine head gasket set , head bolt push set , the above mentioned engine head system oh repair remove , hydraulic pump assembly , hydraulic repair seal kit , hydraulic rod washers and seals , hydraulic pressure holding service kit , the above mentioned hydraulic pump assembly oh repair , front shaft pedal bearing , oil seal set , gasket kit , lock washer and bolt, nut set , the above mentioned front pedal shaft assembly oh repair , bs-iii radiator assembly , inter cooler repair , coolant plastic dat-mtd single cap , radiator hose pipe , the above mentioned engine cooling system oh repair removes , air dryer repair kit , air compressor repair kit , cylinder oil seals , cylinder roaring and packing , rotary pump fuel pipe , the above mentioned engine compressor system oh , the above mentioned engine compressor presser system oh , break master cylinder repair kit , break booster assembly , break booster adjuster yoke assembly , the above mentioned break booster oh repair , the above mentioned break booster oh repair remove , break booster adjuster yoke assembly , hand break valve assembly , the above mentioned break booster repair the all parts , steering rod and column assembly , steering gear box service kit , steering gear box seal kit , lock washer and bolt set , the above mentioned steering overhauling repair removes , lh switch , lock kit , iron wire spokes , cylinder kit , damper rr wheel , skf bearing , brake shoe , gasket r crank case , panel comp break , rear brake drum , unit assy fuel , chain spocket kit , rim rr wheel , side shield , front madgurd , cam chain kit , cam shaft , arm comp, valve rocker , dc kit , ngk cr6hsa plug )

CTN :45544096

23 Jun, 2026 3.30 Lacs

Agra - Uttar Pradesh

Tender For supply of taking down of unserviceable summersible pump , supply and fixing of upvc column pipe , supply and lowering commissiong and tesing only of submersible pump , supply and fixing pvc insulated submersible cable , supply and fixing dol submersible motor controller starter , m and l for ms well cap , ms clamp , s and f cast iron adopter , m and l for pvc wire rope

Central Government/Public Sector

CTN :45384656

20 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For corrigendum : provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, c

CTN :45527067

22 Jun, 2026 NA

Imphal - Manipur

Tender For supply of lv7 xenon nk 00000000000000000 link rod large xenon , lv7 xenon nk 00000000000000000 link rod small xenon , lv7 re nk 00000000000000000 chain sprocket set , lv7 tmb nk 00000000000000000 temp sensor unit , lv7 tmb nk 00000000000000000 rpm meter , lv7 2 5 ton nk 00000000000000000 wiper wheel box , lv7 mg nk 00000000000000000 ht lead , lv7 re nk 00000000000000000 ignition switch , lv7 mpvy nk 00000000000000000 pneumatic pipe , lv7 2 5 ton nk 00000000000000000 timing oil seal , lv7 2 5 ton nk 00000000000000000 oil seal 7808 , lv7 2 5 ton nk 00000000000000000 pilot bearing , lv7 2 5 ton nk 00000000000000000 gear box oil seal , lv7 re nk 00000000000000000 rear brake shoe , lv7 mpvy nk 00000000000000000 main leaf frt , lv7 re nk 00000000000000000 link rod brake pad , lv7 sumo nk 00000000000000000 spring bush , lv7 sumo nk 00000000000000000 u bolt , lv7 sumo nk 00000000000000000 rod spring , lv7 2 5 ton nk 00000000000000000 field coil assy , lv7 mg 33920m80cs0 controller assy epi , lv7 mg nk 00000000000000000 damping pad , lv7 mg nk 00000000000000000 starter motor , lv7 stln nk 00000000000000000 knuckle bearing , lv7 stln nk 00000000000000000 head gasket , lv7 tmb nk 00000000000000000 temp sensor unit army bus , lv7 sumo nk 00000000000000000 head gasket , lv7 2 5 ton nk 00000000000000000 bush set , lv7 mpvy nk 00000000000000000 pneumatic valve , lv7 mg nk 00000000000000000 suspension bush set , lv7 mg nk 00000000000000000 element air cleaner , lv7 scorpio nk scorpio 0007 fuel filter , lv7 scorpio nk scorpio 101069 hose steering , lv7 scorpio nkscorpio015 belt 4 pk , lv7 scorpio nkscorpio029 bush silent block , lv7 innova nk 00000000000000000 disc clutch , lv7 innova nkinnova589 cover assy clutch , lv7 innova nk 00000000000000000 fuel pump motor , lv7 innova nkinnova0011 bearing clutch release , lv7 innova nk 00000000000000000 intake manifold , lv7 innova nk innova 010 nozzle , lv7 innova nk 00000000000000000 fuel filter , lv7 innova nk 00000000000000000 fuel pipe , lv7 innova nk toyato 03 air filter , lv7 innova nk innova 018 power window controller , lv7 innova nk innova 0012 brake pad , lv7 innova nk toyato 04 ac belt , lv7 innova nk innova 0021 brake shoe , lv7 innova nk innova 017 power window switch , lv7 innova nk 00000000000000000 oil filter //bid details 2 / 44

Pneumatic Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector