Latest pneumatic tool Tenders | Government pneumatic tool Tenders

Central Government/Public Sector

CTN :45546878

10 Jul, 2026 NA

Kurla - Maharashtra

Tender For supply of pneumatic needle scaler, product model no. cp b 18m mfg. by chicago pneumatic tools (or)equivalent make of desoutter germany / milwaukee usa / fuji japan make. the item shall be procured from oem or oem 's authorized distributor. [ warranty period: 30 months after the date of delivery ]]

CTN :45521999

01 Jul, 2026 5.00 Lacs

Kupwara - Jammu And Kashmir

Tender For tender for repair of launch x-431 pro scan tool , repair of hyd jack 10 ton , repair of 40 kva alternator , repair of air compressor for pneumatic tools , repair of elak multipurpose auto elect test bench

State Government

CTN :45466096

15 Jun, 2026 30.00 Lacs

Siwana - Rajasthan

Tender For annual rate contract for provding new water service connection with material under division siwana - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement fo

Central Government/Public Sector

CTN :45471156

22 Jun, 2026 NA

Perambalur - Tamil Nadu

Tender For 20 mm bore rubber pneumatic tool hose confirming to is:446/1987; specifications: 1)types of rubber air hose - type 3, 2) working pressure of 1.4 mpa, 3) length of hose should be of 30 mts each, 4) isi marking to be marked on the hose pipe. make: indo, gates, dunlop, ganga, mitras and padmini. note: 1) test report to be furnished during the supply of the hose pipe, 2) one sample shall be supplied and approved by the consignee before bulk supply.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45468246

18 Jun, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For providing of custom bid for services - h-170 defect rectification - h-170: pneumatic tool for helo traversing system (hts) has been received onboard. further, serviceability/ operational checks/ installation of pneumatic tool is required for proving of helo traversing system (hts).

CTN :45408073

12 Jun, 2026 NA

Parganas - West Bengal

Tender For providing of repair and overhauling service - filter regulator lubricatior pneumatic tool impact wrech; filter regulator lubricatior pneumatic tool impact wrech; yes; service provider premises, buyer premises

Central Government/Public Sector

CTN :45395356

13 Jun, 2026 NA

Kurla - Maharashtra

Tender For supply of needle pointed of dimension 3mm x 178mm of make- chicago pneumatic tools / desoutter germany / milwaukee usa / fuji japan. 01 nos box should be of quantity 100 nos. [ warrantyperiod: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45115349

29 May, 2026 NA

Sambalpur - Odisha

Tender For supply, installation and commissioning of pneumatic pipeline to facilitate the use of pneumatic tool at integrated pit lines of coaching depot sambalpur.

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

Central Government/Public Sector

CTN :45255431

30 May, 2026 NA

Kurla - Maharashtra

Tender For supply of pneumatic needle scaler, product model no. cp b 18m mfg. by chicago pneumatic tools (or)equivalent make of desoutter germany / milwaukee usa / fuji japan make. the item shall be procured from oem or oem 's authorized distributor. [ warranty period: 30 months after the date of delivery ]]

Pneumatic Tool Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors