Latest poclain crawler Tenders | Government poclain crawler Tenders

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45264743

26 May, 2026 10.00 Lacs

Jobner - Rajasthan

Tender For rate contract for providing services of excavation cum loader cum dozer machine.

CTN :45263838

27 May, 2026 4.63 Lacs

Fatehabad - Haryana

Tender For cleaning and excavation of pond near surjan har dera in mc ratia using poclain machine.

CTN :45256476

26 May, 2026 10.00 Lacs

Jaipur - Rajasthan

Tender For rate contract for providing services of excavation cum loader cum dozer machine

CTN :45036605

18 May, 2026 5.00 Lacs

Balaghat - Madhya Pradesh

Tender For corrigendum : for the excavation work of dhobi ghat pond balaghat, poclain machine including diesel should be made available at the rate of per hour.

CTN :45138827

28 May, 2026 NA

Barmer - Rajasthan

Tender For supply of s and f of ring main system for wss - supplying laying jointing commissioning and testing 100mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supplying laying jointing commissioning and testing 150mm bore centrifugally cast spun ductile iron pressure pipe with spigot and socketed ends class k7 confirming to is 8329 or 2000 as per atc , supply and fix valve reflux with by pass arrangement 100mm 4 inches dia , supply and fix foot valve confirming to is 4038 100mm 4 inches dia , supply and fix valve sluice flanged of class 1 point 6pn 100mm 4 inches dia , supply and fix valves sluice flanged of class 1 point 6 pn 150mm 6 inches dia , supplying installing testing and comissioning of centrifugal pump electric driven capacity not less than 25 lps discharge at 60 metre head in load as per atc , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable hd 1100v grade stranded aluminium conductor size 70 sqmm 3 point 5 core , supply laying testing cable xlpe insulated screened pvc bedded galvanized steel strip wire armd electric powercable heavyduty 1100v grade stranded aluminium conductor size 10 sqmm 4 core , supplying installing testing and commissioning of outdoor type factory made crca sheet thickness 3 point 15mm platform mounted lt panel board to accommodate as per atc , supplying installing testing and commissioning of indoor type factory made crca sheet thickness 2mm platform mounted lt panel board to accommodate as per atc , supply install test commission centrifugal openwell submersible pump cap 10hp singlephase discharge range 740 to 200lpm head range 35 to 54m suction x discharge pipe dia 65x50mm as per atc , supply and fix cast iron air valves with two air outlets 80mm dia bore and fixing up in ) /bid number : gem/2026/b/7514655 * /dated: 08-05-2026 & & / bid document 1 / 21 & & ' ' /item category cast iron water supply mains , excavation in tranches not exc 1 point 5m wide n exc 1 point 5m depth over exc 10sqm on plan and n exc 1 point 5m in depth for foundations shafts wells cesspite mainholes pier holes as per atc , returning filling in including spreading laveling watering and well ramming in layers n exc 25cm in soft or loose soil complete all as specified and directed by engr in charge , removal of excavated soil material to a distance not exc 50m or depositing where directed at a level not exc 1 point 50 metre above th staring point complete all as specified as per atc , boring of hole under road pavement hardstanding by trenchless technology using ultra sounding technique nec machine incl hdpe pipe 150mm dia suitable for 0 point 4mpa working pressure , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 150mm for taping complete all as specified and directed note tee 150 x 150 x 150mm paid separetly in di special , cutting existing ci or di pipe line of 150mm and inserting tee of size 150 x 150 x 100mm for taping complete all as specified and directed note tee 150 x 150 x 100mm paid separetly in di special , di or ci special such as tee bend collar tail piece and other fitting as required , earthing of poles and other machinery or equipment using 4mm gi wire as earthing lead and ms galvanized plate of size 60cm x 60cm x 6mm as earth electrode , demolition and diasmanttling of concrete in ground floor and pavings n exc 15cm thickness , m and l of cement concrete b 2 1 colon 2 colon 4 40mm graded aggregate 100mm thickness , m and l for contruction of brick masonry valve pit in repair of inter size 90x90x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc , m and l for contruction of brick masonry valve pit in repair of inter size 120x120x90cm incl nec exc earth work in soft or loose soil brick work plastering white wash pcc coping ms frame as per atc

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

corporations/Associations/Others

CTN :45021663

05 May, 2026 NA

Valsad - Gujarat

Tender For annual rate tender for purchase of materials of construction / road resurfacing for year 2026-27 - brick, sand, kapchi 25 to 40 mm, grit 6 to 10 mm, handmade metal 40 to 63 mm, rubble 9 inch, cement (53 grade) 50kg, tor steel, 60 mm rubber rise, m40 paver block, 80 mm rubber rise, m40 paver block, g.s.b., dust (powder), brick masonry (1:6), stone masonry (1:6), plaster (1:4), r.c.c. slab filling 1:2:4, (to give the price of steel separately in kg), r.c.c. slab filling 1:1/2:3 (to give the price of steel separately in kg), p.c.c. (1:3:6), p.c.c. (1:4:8), pointing (1:2), yellow soil, hard murrum, handmade metal, np3 pipe 300mm, np3 pipe 450mm, np3 pipe 600mm, np3 pipe 900mm, np3 pipe 1200mm, j.c.b machine (including diesel driver), roller (including diesel driver), truck (including diesel driver), hydraulic center trailer (including diesel driver), semi dense carpet patch work on various roads in pardi municipal area, building materials and soil lifting work from pardi municipal area, compounding of tarkhuta in pardi municipal area (excavation including five wire, cross wire, cement pole), waterproofing, two coat putty or two coat of primer (including brushing), wall painting (three coat) with plastic emulsion paint, ceiling painting (three coat) with plastic emulsion paint, outer wall painting (three coat) with weather proof acrylic emulsion paint including priming coat, box cutting the road surface to proper slope and camber for making a base for the road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 mt lead., scarifying gravelled macadam or bitumen macadam surface 6 cm to 10 cm depth including stacking useful materials on road side and disposing off remaining stuff, construction of granular sub-base by providing well-graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix-in place method with rotavator at omc and compacting smooth wheel roller to achieve the desired density, complete in two layers as per technical specification clause 401., providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density in two layer. by mechanical means with 1 km lead, providing and laying bituminous base course 75 mm thick compacted in two layers with tack coat of asphalt (vg-30) 80/100 at the rate of 2.5 kg/10 sqmt and using b.t. stone aggregates of required gradation and asphalt 80/100 grade for mixing @ 1.99% by weight of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller including providing all materials, equipment’s, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 50mm thick compacted b.m. with b.t. aggregate as per mort&h specification and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and bitumen grade 80/100 for mixing at the rate 34.0 kg/m.t. i.e. 3.4% of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver censor finisher and consolidation with vibratory roller including providing all materials, equipments, tools and plants, oil, kerosene, fire wood, labour charges etc. complete., providing and laying 25 mm thick compacted semi dense bituminuous concrete using stone chips as per mort&h gradation and asphalt grade (vg-30) 80/100 for tack coat at 2.5 kg/10 sqmt with mechanical sprayer and 80/100 grade asphalt for mixing @ 5.0% by weight of total mix for binder including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher and consolidation with vibra

CTN :44908888

30 Apr, 2026 NA

Mandsaur - Madhya Pradesh

Tender For inviting rates of jcb per hour tractor trolly per trip tractor trolly rate including hard moorum with jcb excavating per trip and transportation up to 5 km rates of poclain machine per hour including concrete breaking and excavation for financial yea

Poclain Crawler Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others