Latest point load index tester Tenders | Government point load index tester Tenders

State Government

CTN :41333626

12 Aug, 2025 2.18 Crore

Udaipur - Rajasthan

Tender For purchase of various testing major apparatus (lab equipment) in quality control labs under zone ajmer, bikaner,udaipur-i and udaipur-ii - fully automatic servo controlled compression testing machine (ctm)-3000 kn capacity with additional load frame of 500 kn capacity & flexure frame of 100 kn capacity:- supplying, fixing and commissioning of fully automatic servo controlled compression testing machine (ctm) of 3000 kn capacity which should be capable of conducting compression test on concrete & mortar specimens and allied products as per is : 516 & is :4031 (part-6). the machine should be power operated with servo controlled motor capable to apply the load continuous by without shock and there shall be large enough space provided for test specimen to accommodate in a readable position. machine shall have good load control and capable of applying the load at the specified rate, uniformly with automatic control with percentage of error for load shall not exceed + 1.0% of the indicated load. the system shall have an arrangement for automatic placing system, which achieved by the combination of advance hydraulic and electronic system. the systems can be loaded in load, displacement or strain control basis. complete machine unit shall conform to is: 14858-2000 and is: 9399-1979 and as per direction of engineer in charge. the salient features and technical specification of the machine shall be as under :- i) ctm-3000 kn machine loading frame - four column high stiffness welded from with enough stabiility . - heavy duty mechanical platens with spherical seated block (vicker hardness > 550), bottom bearing, blocks, auxiliary plates (vh > 550) shall have flatness tolerance within 0.03 mm and squareness and parallelism tolerance within 0.06 mm wide.- base shall have fine finished servo controlled hydraulic cylinder with hardened and finest abraded piston. - frame with safety guard door and transparent fragment guard (both front & rear) (ii) hydraulic pumping system, it should be compact in design and suitable for the supply of required flow and pressure for the movement of the actuactor. it shall have oil tank of adequate capcity vane type pump powered by three phase motor. anti vibration mounting shall provided as standard along with the hps.iii) micro-processed (plc & hmi) based touch panel display & control system user friendly interface control system with application software shall provide the digital servo control, precise operation, ramp generation for the machine, data acquisition, storage, processing, analyzing and reporting etc for the continuous operation of the system.iv) technical specification of ctm (3000 kn) capacity -3000 kn, platen size 320 mm dia, ram dia 260 mm, ram travel 50 mm, vertical daylight clearance 350 mm, horizontal daylight clearance 370 mm, least count - 0.1 kn, pace rate controlling -1%, rate of loading 1.3 mm/min (when running idle), 0.14 to 032 mpa/sec (with specimen), motor capacity 3 hp (min), power supply (240v, 50-60hg, three phase.), capacity of oil tank 20 litre, max. operating pressure 210- 600 bars, flow of pump 2 & 4 lpm (duel speed) , auto stop & release of pressure when specimen failure, multi operation compression test up to 3000kn, up to 500 kn range and flexure test, accessories spacers- 4nos, controller unit auto pid operation with closed loop update rate of 10 khz to control pace rate automatically as programmed. start, stop & hold test system, load control 01kn/sec to 50 kn/sec., displacement control 0.01 mm/sec to 1mm/sec. load indication & control coloured touch screen display of suitable size, test report facility to print test report, export data to ms excel. auto internal calibration without proving ring, short circling protection overload safety cut off, piston over travel safety cut off- shall be made in addition to 3 kva 3 ph servo control stabilizer, technical specification of ctm (500 kn) load frame- capacity 500 kn, platen size 256 mm,

Central Government And Public Sector

CTN :41316699

18 Aug, 2025 2.63 Lacs

Darjeeling - West Bengal

Tender For providing of custom bid for services - annual maintenance contract for servicing repairing of 04 nos oil filteration machine elc 100 lp and technical testing of turbine oil viscocity grade 46 of tld iii ps

CTN :41314559

19 Aug, 2025 NA

Balangir - Odisha

Tender For supply of fuses , rheostat sliding type , capacitors , various electronic components , various lamps , plug socket piano switch , cables , bus bar with brackets , rubber mat , electrician helmet , rcc pole with accessories , safety belt , ohm meter series type shunt type portable box type , digital multi meter , a.c. voltmeter m.i. analog, portable box type housed in bakelite , milli voltmeter centre zero analog, , ammeter mc analog, portable box type housed in bakelite case , ac ammeter mi, analog, portable box type housed in bakelite case , kilo wattmeter analog , digital wattmeter , a.c. energy meter , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tong tester clamp meter , megger , 3- point d.c. starter , 4- point d.c. starter , wheat stone bridge with galvanometer and battery , single phase variable auto , phase sequence indicator , growler , ac starters , oscilloscope dual trace , function generator , soldering iron , temperature controlled soldering , discrete component trainer , linear i.c. trainer , digital i.c. trainer , domestic appliances , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , battery charger , current transformer , potential transformer , solar panel with battery , d.c. shunt generator with control panel , motor- generator ac to dc , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker , dc series motor coupled with spring balance load , dc shunt motor , dc compound motor with starter , motor generatordc to ac set consisting , ac squirrel cage motor with star delta , ac phase-wound slip ring motor with starter switch , universal motor with starterswitch , synchronous motor with accessories like starter, excitation , thyristor igbt controlled d.c. motor drive with tacho-generator , thyristorigbt controlled a.c. motor drive with , single phase transformer, core type, air cooled , three phase transformer, shell type oil cooled with delta star , electrical machine trainer , diesel generator set with changeover switch over cut , used dc generators-series, shunt and compound type for overh , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with , manual motor coil winding machine , ceiling fan coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter , ev charger , ev charger home , wiring board , metal rack , black boardwhite board , fire extinguisher co2 , fire buckets

corporations/Associations/Others

CTN :40420978

18 Aug, 2025 3.27 Lacs

Kasimpur - Uttar Pradesh

Tender For corrigendum : procurement of lab instruments for chemical lab of ogcd, dtps, htps, kasimpur - sension5 portable conductivity meter specification range:#conductivity s/cm 0 to 19.99; 200 to 1999#conductivity ms/cm 2 to 19.99; 20 to 199.9#tds: 0 to 50,000 mg/l as nacl salinity: 0 to 42 g/l (ppt)#temperature: -10.0 to 105.0 c#resolution:#conductivity 0.01; 1.0#conductivity ms/cm 0.01; 0.1#tds: 0 .00-199.9 mg/l 0.1mg/l 2 00-1999 mg/l 1 mg/l 2 .00 -19.99 g/l 0.01 g/l 2 0-50 g/l 0.1g/l #salinity: 0.1 g/l (ppt)#temperature: 0.1 c#accuracy:#conductivity: 0.5% in the first 3 ranges, 1% at highest range #td of full scale #salinity: 0.1 ppt (-2 to 35 c) #temperature: 0.1 c# , make-hach, ph meter probe (ph meter sension ph3) cat no-lzw5010t.92.0002 make hachdetails in photograph enclosed in tender document, manual sieves shaker (with sieves set - mesh size-50,+100,+200) any standard make details in photograph enclosed in tender document, centrifugal machine for oil testing, any standard maketube capacity:no.12-24:size 15 mlshould have a digital timerbody should be made of strong fabricated & corrosion resistant steel.control panel- for start/stop switch, dynamic brakes, step less speed regulator with zero start switch & speed indicator with timer and protective fuses.door interlock.maintenance free brushless drive motor with exact speed preselection and display. speed range 100 to3000 rpm and above, accuracy 1 rpm. details in photograph enclosed in tender document, orset appratus (complete set), any standard make details in photograph enclosed in tender document, ph 2700 ph meter specification #ph range -2.000 to 20.000 ph #resolution 0.1 / 0.01 / 0.001 ph #accuracy 0.002 ph + 1 lsd #cal. points up to 6 preset or 5 custom #buffer sets usa, nist, din, user 1, user 2, custom #or range 2000.0 mv #rel. mv range 2000.0 mv on 0.1 mv# accuracy 0.2 mv #temperature,range (meter) 0.0 to 100.0 c / 32.0 to 212.0 f #resolution 0.1 c / 0.1 f #accuracy 0.3 c / 0.5 f #compensation atc / mtc #power requirements 9 v dc adapter, 1.3 a (100/240 vac, smps)# make- eutech

CTN :39038241

22 Aug, 2025 10.88 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, machine tools & equipment foran international standard itotin mechanic diesel engine (md) tradeat iti bardoli, gujarat, india (package 3: mechanic diesel - files assorted sizes and types including safe edge file(20no’s), flat file, second cut, flat file, bastard, grease gun, grease gun heavy duty trolley type, growler, hacksaw frame, hammer ball peen, hammer chipping, hammer copper with handle, hammer mallet, hammer plastic, hand operated crimping tool, hand vice, hollow punch set of seven pieces, insulated screwdriver, insulated screwdriver, left cut snips, magnifying glass, oilcan, philips screwdriver set of 5pieces, pipe cutting tool, pipe flaring tool, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, engine wire harness connected complete with electrical equipment, diesel fuel quality test equipment set, training setup for adas systems, 4-wheel alignment set & hoist with advanced driver assistance systems (adas), training system for sensors in motor vehicles, training system for the basics of pulse generation and ignition in vehicles, training system: common rail diesel injection system, battery–charger, car jet washer with standard accessories, chain pulley block capacity with tripod stand, compression testing gauge suitable for diesel engine with standard accessories, connecting rod alignment fixture, cylinder liner-dry& wet liner, press fit & slide fit liner, different type of engine bearing model, different type of piston model, fuel feed pump for diesel, fuel injection pump (diesel)inline, fuel injection pump dismantling toolkit /universal vice, fuel injection pump ve pump/ distributor fuel rotary pump (dpc) pumps, glow plug tester, injector–multi hole type, pintle type, injector cleaning unit, injector testing set (hand tester), oil pump for dismantling and assembling., piston ring compressor, piston ring expander and remover., piston ring groove cleaner., radiator cut section-crossflow, radiator cut section-downflow, radiator pressure cap, tandem master cylinder with booster, turbo charger cut sectional view, water pump ford is mantling and assembling, workbench with bench vice and storing drawers, arbor press hand operated 2-ton capacity, drilling machine bench to drill, dual magnetization yoke, grinding machine pedestal (general purpose), hydraulic jack, pipe bending machine (hydraulic type), pneumatic rivet gun with standard accessories, tin smiths bench folder, trolley type portable air compressor, special tools and equipment, hydraulic vertical honing machine for engine cylinder and brake bore, pneumatic valve seat grinder and lapping kit, intercooler cut model assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, belt tensioner gauge, granite surface plate with stand and cover, marking out table, multi scan tool, spring tension tester, ammeter dc with external shunt, cylinder bore gauge, dc ohmmeter, depth micrometer, dial gauge, multimeter digital, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, sheet metal gauge, straight edge gauge (2ft.), straight edge gauge (4ft.), surface gauge with dial test indicator plunger type, tachometer (counting type), telescope gauge, temperature gauge with sensor, thermostat, timing lighter, tyre pressure gauge with holding nipple, vacuum gauge, vernier calliper, wire gauge(metric), hydrometer, engineers stethoscope, drill twist (various sizes), hand reamers adjustable, drill twist(assorted), set of stock and dies with die stock-metric, taps and dies complete sets(5types), steel rule, caliper inside with spring, caliper outside with spring, dividers with spring, engineer’s square, feeler gauge 20blades (metric), hand shear universal, bench lever shears, air blow gun with standard accessories, air ratchet with standard accessories, air impact wrench with standard accessories, an

CTN :41273460

16 Aug, 2025 NA

Gopalganj - Bihar

Tender For supply of mechanical engineering equipments - models and charts , drawing equipments and instruments , models for projection and demonstration , combined shear force and bending moment apparatus , heat pump , separating and throttling calorimeter , indicator unit , green sand moulding up, casting up and patterns , hot forging equipment , punching blanking press , screw pitch gauge , working models of surface condenser , refrigerant leak detector , air conditioning test rig , air conditioning unit , sling psychrometer , natural convection apparatus or test rig , forced convection apparatus or test rig , thermal conductivity apparatus , stefan boltzmann up , thermal conductivity apparatus for composite wall , advanced casting equipments and tools , 3d printer , bicycle free wheel sprocket mechanism, geneva mechanism, ackermans steering gear mechanism and foot operated air pump mechanism , different types of cams, follower sand cam follower arrangements , various belt drives, chain and sprocket , various types of brake assemblies , vehicle tyre balancing machine , proximity sensor kit , temperature transducer kit , pressure transducer kit , flow sensor kit , thermistor , thermocouple , stepper motor control trainer , hydraulic motor trainer , cut sections of pumps, actuators, valves and accessories used in hydraulic systems , working models of pumps, actuators, valves and accessories used in hydraulic systems , oil hydraulic trainer , advanced electro hydraulic and electro pneumatic hardware systems , out put devices , thermal actuators , magnetic actuators , open and closed loop control system kit , pid controller test bench , cro 150mhz and 100mhz and 70mhz and 50mhz , rs485 i o module , ethernet i o module , pneumatic trainer , hydraulic trainer , thermal conductivity apparatus, metal bar, electric heater, thermocouple , experimental set up for thermal conductivity of liquid , experimental set up for thermal conductivity of insulating material , composite wall apparatus , critical radius of insulating materials apparatus. , experimental up to for testing effectiveness of metallic fin pin fin apparatus , a metallic tube of diameter d 45mm and length l 450mm with a electrical heater coil along the axis of the tube , stefan boltzmanns apparatus , emissivity apparatus , critical heat flux up , batteries and fuel cells , hydrometer , capillary tube , red wood viscometer , beaker , pipette , electronic balance

CTN :40050707

07 Aug, 2025 6.56 Lacs

Unnao - Uttar Pradesh

Tender For corrigendum : supply of different materials used for testing at electricity test division, unnao under electricity distribution circle, unnao. - o/c & earth fault relay (ashida adr 241 b), clamp meter (0-20a), combination pilier (taparia), rachet set (taparia), grinder bosch (240 volt, ac operated), drill machine (240 volt, ac operated), spanner set (taparia), pcv tape (red, yellow & blue) colour, pin type & u type copper lug 2.5 mm2 (100 each), dc indication led (24 volt to 36 volt) suitable for 11kv & 33kv control pannel, flexible copper wire havells (red, yellow & blue, black color) 2.5mm2, tripping coil with assembely make tripping coil assembly stable 33 kv vcb (stelmec, toshiba, cg, schneider), oti(oil temperature indicator) with limit switch alarm & trip contact, temp range (0 c to 150 c), wti (winding temperature indicator) with limit switch alarm & trip contact, temp range (0 c to 150 c) with gradient adjustment through a shunt for ct secondary input (1amp to 5amp), closing coil with assembely make tripping coil assembly stable 33 kv vcb (stelmec, toshiba, cg, schneider)

corporations/Associations/Others

CTN :41232281

18 Aug, 2025 10.00 Lacs

Ranchi - Jharkhand

Tender For supply of hydrometres milk , balance for weighing food stuff , centrifuge clinical , weight machine adult , baby weight machine , salters baby weighing machine , harpender calipers , height measuring stand , chloroscope , horrock s apparatus , mid upper arm circumference muac tapes , haemoglobinometer , bp apparatus digital , stethoscope , sound level meter , water sampling bottle from any depth , needle shredder , vaccine carrier , craft water testing kit , iodine testing kit , glucometer , mosquito catching kit , clinical thermometer , first aid kit , otoscope , dissecting microscope , oil immersion microscope , slide set 50 slides for entomology , museum models , museum charts , disposable delivery kit , nutrition specimen , museum wet specimen , insecticides speciments

State Government

CTN :41216984

08 Aug, 2025 NA

Hooghly - West Bengal

Tender For supply delivery of some spare parts required for regular repairing overhauling of chlorine machines in khanakul i and ii block at different w/s scheme dist hooghly under electrical division phe dte - supply & delivery of following materials (total pump house- 102 nos). from 01/09/2025 to 31/07/2026., 15 mm dia flexible pvc pipe for supply chlorine solution.(approved make), 15mm dia upvc pipe made to astm d-1785, schedule 40(light) duty [make: suprem/oriplast / ashirvad/any approved], g.i. short piece of tata make (above 50mm & upto 150 mm ong), 15 mm dia gi elbow, 15 mm dia tail piece, 15 mm dia powder coated metal clamp, 15 mm dia fabt (upvc), 15 mm dia union (g.i.), 15 mm dia tee (upvc), 15 mm dia long screw (g.i.), 15 mm dia iron jam nut (g.i.), 15 mm dia nrv (approved make), coupling rubber, diaphragm, pinion, bearing (skf), oil ring (approved make), oil chamber nut (approved make), ball set (approved make), 15 mm dia pvc ball valve, mobil mak gold (make - castrol), 15 mm upvc tank nipple (make- ashirbad/ supreme/approved make), 100 ltr. capacity pvc tank for chlorine solution (make: sintex/patton), 16 amp triple pole main switch, 415v ac, 50hz with neutral link. [make: havells/siemens/standard], direct online starter, 415v, 50hz, 3ph, relay range (1-1.6 amp).[make: l&t (model-mk1) / siemens ], eceentric strap, eceentric, 1.5 sq. mm flexible copper wire fr pvc insulated 1.1 kv grade, is 694 [make- finolex / havells/equivelent], labour charges for dismatling and refitting after repairing the chlorine machine set from existing position including fitting fixing the above [sl.no.- 1(a to ab)] by dismantling the old one including supplying necessary materials as required including testing commissioning all complete as per direction of eic. for the 102 nos. sites of hooghly., carrying of burnt out 0.5 hp chlorine motor form w/s scheme to nearest work shop for repairing., rewinding of 0.5 hp chlorine motor with suitable size copper wire including heat varnish and all complete as per direction., carrying of repaired 0.5 hp chlorine motor form work shop to following w/s scheme, p.h., add: 18% gst, add: 1% cess

State Government

CTN :41216990

08 Aug, 2025 NA

Hooghly - West Bengal

Tender For supply delivery of some spare parts required for regular repairing overhauling of chlorine machines in arambag goghat i and ii haripal sankrail blocks at different w/s scheme dist hooghly and howrah under electrical division phe dte - supply & delivery of following materials ( total pump house-102 nos). from 01/09/2025 to 28/02/2026., 15 mm dia flexible pvc pipe for supply chlorine solution. (approved make), 15mm dia upvc pipe made to astm - d - 1785, schedule 40 (light) duty [make : suprem/oriplast / ashirvad/any approved], g.i. short piece of tata make (above 50mm & upto150 mm long), 15 mm dia gi elbow, 15 mm dia tail piece, 15 mm dia powder coated metal clamp, 15 mm dia fabt (upvc), 15 mm dia union (g.i.), 15 mm dia tee (upvc), 15 mm dia long screw (g.i.), 15 mm dia iron jam nut (g.i.), 15 mm dia nrv (approved make), coupling rubber, diaphragm, pinion, bearing (skf), oil ring (approved make), oil chamber nut (approved make), ball set (approved make), 15 mm dia pvc ball valve, mobil mak gold (make - castrol), 15 mm upvc tank nipple (make- ashirbad/ supreme/ approved make), 100 ltr. capacity pvc tank for chlorine solution (make : sintex / patton), 16 amp triple pole main switch, 415v ac, 50hz with neutral link. [ make: havells/ siemens/standard ], direct online starter, 415v, 50hz, 3ph, relay range (1-1.6 amp). [ make: l&t (model-mk1) / siemens ], eceentric strap, eceentric, 1.5 sq. mm flexible copper wire fr pvc insulated 1.1 kv grade, is 694 [make- finolex / havells / equivelent], labour charges for dismatling and refitting after repairing the chlorine machine set from existing position including fitting fixing the above [sl.no.- 1(a to ab)] by dismantling the old one including supplying necessary materials as required including testing commissioning all complete as per direction of eic. for the 102 nos. sites of hooghly., carrying of burnt out 0.5 hp chlorine motor form w/s scheme to nearest work shop for repairing., rewinding of 0.5 hp chlorine motor with suitable size copper wire including heat varnish and all complete as per direction., carrying of repaired 0.5 hp chlorine motor form work shop to following w/s scheme, p.h., add: 18% gst, add: 1% cess

Point Load Index Tester Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others

State Government

State Government