Latest point machine Tenders | Government point machine Tenders

Central Government/Public Sector

CTN :45733183

08 Jul, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - 98050126]scrap cond./released/unserviceable ms scrap such as mg/bg carriage frames, coach battery box ,tension spring, seat frames of different sizes, berth frames, wheel stand, tie bar gate, ms gate, battery box, empty electrical box, ms window, ms window, hand trolley, hydraulic trolley, gi re mast, window grills, ms grills, ms stands, rolling shutters and partition frames of coaches , wheel stand, suspension rods , foot step, ms boxes, luggage rack, ms pipes, ms cylinder, cut parts of coaches, zinc sheet, transformer body, coach sheets, point machine cover, iron rods, trolley, ms wire, bolt & nut and other nmg coach cutting scrap items coming under ms items with/without ss, plastic, electrical and other nfs attachments on as is where is condition, available under the custody of cdms 08 ward ap. note: pick and choose of the material are not allowed. loading to be started from one end and to be ended on other end only. note: cutting permitted up to loadable size only ( loc: bin no. 132 at scrap yard)

Central Government/Public Sector

CTN :45551224

03 Jul, 2026 NA

Villupuram - Tamil Nadu

Tender For corrigendum : dn/mas acting for and on behalf of the president of india invites e-tenders against tender no m-sg-2026-515-ms_vm-2 closing date/time 03/07/2026 15:00 hrs. bidders will be able to submit their original/revised bidsupto closing date and time only. manual o ers are not allowed against this tender, and any such manual o er receivedshall be ignored.1. nit headername of worksignalling and telecom portion of work in connection withengineering works in chennai beach(msb)-villupuram(vm)section overchennai division.(msb-vm-2026-2)bidding typenormal tendertender typeopenbidding systemsingle packet systemtender closing datetime03/07/2026 15:00date time of uploadingtender09/06/2026 16:19pre-bid conferencerequirednopre-bid conference datetimenot applicableadvertised value 14550242.18tendering section signalbidding style[ decision at schedulelevel ]bidding unitearnest money (rs.) 291000.00validity of offer ( days) 60tender doc. cost (rs.)0.00period of completion 12 monthscontract type works - general contract category expenditurebidding start date 19/06/2026are jv allowed to bid nonumber of jv memberallowed0are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a-sor 2022 items9145422.44above/below/par1please see item breakup for details. 9145422.44 at par9145422.44description:- sor 2022 itemss.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () b-non sor items5404819.7411 3900.00numbers 100.00 390000.00 at par 390000.00 rs.description:- provision of 7.2 mm holes in old/new rails to provide continuity bonding /polaritybonding etc (all other material required for the work shall be supplied by contractor) (this scheduleincludes the xing of bond wire in the 7.2 mm hole). the bond wire and channel bond pins will besupplied by railways)22606.00numbers 670.00 406020.00 at par 406020.00 rs.description:- releasing and re xing of tld boxes in dc track circuits. (this work includes releasingthe existing track connections and reconnecting the track connections after the completion of workalong with provision of necessary holes for connecting lead wires and painting of track particulars.all the materials required for the above work shall be supplied by the contractor as per the directionof the rly engineer at site.3360.00numbers7400.00 444000.00 at par 444000.00 rs.description:- re xing of released point m/c (all types) and its gound connections (existing pointmachine) including wiring and termination in point m/c and interconnections between point m/c andct box through pvc hose pipe and painting (all types of insulations connected to point work , alltypes of bolts and nuts, washer springs/ at , pvc hose pipe, 3/0.75 sq.mm copper wire,7/1.4 sq.mmcopper wire, paints and other miscellaneous items shall be supplied by the contractor). the workshall be carried out as per the instruction of engineer at site.4110.00numbers3600.00 396000.00 at par 396000.00 rs.page 1 of 16run date/time: 09/06/2026 16:19:30chennai division-s and t/southern rlytender documenttender no: m-sg-2026-515-ms_vm-2closing date/time: 03/07/2026 15:004description:- releasing and re xing of cable termination box for point machine (existing pt ctbox)- this work involves breaking of concrete andreleasing the existing cabletermination box andkeep it a side casting of foundation and erection of the released ctbox and carrying out the interconnection between point machine and ct box. the work shall be carried out as per the instrution ofengineer at site.55141.00numbers3771.78 531820.98 at par 531820.98 rs.description:- all type point machine ground connections to be released carefully withoutdamaging, kept aside and re- x the same after completion of engineering work. the work shall becarried out as per the instruction of engineer at site.66 8000.00numbers 5.70 4560

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

Central Government/Public Sector

CTN :45601468

15 Jul, 2026 NA

Lakwa - Assam

Tender For corrigendum : providing of custom bid for services - repair of louvers and cleaning of after stage coolers of hpc a & hpc b unit at new gcp, lakwa, assam asset

CTN :45720849

16 Jul, 2026 NA

Multi City - Rajasthan

Tender For procurement of spares for cooling towers (make-paharpur cooling towers limited) installed for cooling of circulating water for air compressor system and air conditioning system at u 7 and 8, ssctps, rvun, suratgarh - requirement of spares for cooling towers installed for cooling of circulating water for air compressor system in ahp area, model no. 6405m, grdr 20t rt-2.71:1 68-4592-1, fan assy 60in h-3-6 p85- (pcu-2/c) 3118-2, fill pack pc-47 p83-3128-1, d/s 6q cli 460 gb1.1/8 mb 38, spray nozzle p86-1082-3pp, elim pack stack pc-47 96-2034-17, branch pipe 50nb p85-1142-6, d/s coupling 6q with nbm insert gear side(gear shaft hole dia: 35 mm), d/s coupling 6q with nbm insert motor side(motor shaft hole dia: 48 mm), louvers, requirement of spares for cooling towers installed for cooling of circulating water of ac system in ca area, model no. 22103 for item s. no. 2.01-2.06 and model no. 3861 for item s. no. 2.07-2.10, fill sht mx75-8.1 lev p89- 4049-7, fill sht mx75-8.1 lev p89- 4049-8, fan assy 96in h-3-6, grdr 20t cc2, kit d/s 6q i nbm insert (rubber bush withhardware for drive shaft coupling), s.t. nozzle 68 3738-0xx pp, fill sht mx75-8.1 leh 86-4500-3, fill sht mx75-8.1 leh 86-4500-4, brg hsg assy sr118se, fan assy 54in h-3-6, requirement of stitching material for repair of damaged of frp structure of cooling towers, frp stiching material (fibre resin, fibre matstraid, mekp, cobalt, brush, chalk powder etc.)

CTN :45627363

03 Jul, 2026 NA

Ratnagiri - Maharashtra

Tender For corrigendum : supply of 110v.dc high thrust low current maganetic field motor as per irs:s-37/82 with drg.no.s-10910 & 10850, suitable for irs:s:24/2002 & latest amd.(clamp type point machine using for 52 kg. rail, manufacturer crompton greaves and dtpl) ]

CTN :45718921

16 Jul, 2026 12.23 Lacs

Jaipur - Rajasthan

Tender For procurement of spares for cooling towers (make-paharpur cooling towers limited)installed for cooling of circulating water for air compressor system &amp air conditioning systemat unit 7 and 8, ssctps, rvun, suratgarh - grdr 20t rt-2.71:1 68-4592-1, fan assy 60in h-3-6 p85- (pcu-2/c) 3118-2, fill pack pc-47 p83-3128-1, d/s 6q cli 460 gb1.1/8 mb 38, spray nozzle p86-1082-3pp, elim pack stack pc-47 96-2034-17, branch pipe 50nb p85-1142-6, d/s coupling 6q with nbm insert gear side, gear shaft hole dia: 35 mm), d/s coupling 6q with nbm insert motor side, motor shaft hole dia: 48 mm), louvers, fill sht mx75-8.1 lev p89- 4049-7, fill sht mx75-8.1 lev p89- 4049-8, fan assy 96in h-3-6, grdr 20t cc2, kit d/s 6q i nbm insert (rubber bush with, hardware for drive shaft coupling), s.t. nozzle 68 3738-0xx pp, fill sht mx75-8.1 leh 86-4500-3, fill sht mx75-8.1 leh 86-4500-4, brg hsg assy sr118se, fan assy 54in h-3-6, frp stiching material (fibre resin, fibre mat, straid, mekp, cobalt, brush, chalk powder etc.)

CTN :45737246

23 Jul, 2026 NA

Asansol - West Bengal

Tender For supply of electric point machine irs type 220 mm throw, high thrust (ac immunity 160v ac with ip-67 protection), non-trailable to operate on 110v, dc complete with lock and detector slides, cable termination box and clamp lock 60 kg. confirming to irs: s 24/2002 & assy. drg. no. rdso-s/11000 & for motor irs: s 37/82. [ warranty period: 30 months after the date of delivery ] ]

CTN :45730137

16 Jul, 2026 NA

Bhagalpur - Bihar

Tender For supply, testing, installation and commissioning air cooling machine of capacity 51.000 cmh with 2 nos. centrifugal fan, 02 no 7.5 kw electric motor, v belt drive for both the fans, celdek pads, 4 bendpvc eliminators, water pump 1 hp (1w-1s) water distribution system with pumps, piping's, valves etc, air intake filters, g.i air intake louvers, fan outlet dampers and complete in all respect as per spec. attached with annexure "a" [ warranty period: 30 months after the date of delivery ] ]

CTN :45387957

04 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : supply of inlet louvers size 930 mm frp 6 mm thick , fan assembly with hub aluminum alloy , main header pipe size 8 inch hdge , branch pipe size 3 inch hdge

Point Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector