Web Analytics Made Easy - StatCounter

Points And Crossing Tenders

Get complete information related to latest Points And Crossing Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Points And Crossing Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Points And Crossing Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :40489977 Due date: 04 Jun, 202504 Jun, 2025 1.63 Lacs
Tender For (1) job related with workshop nature of repairing haulage pinion, gun metal bearing, and making segments. (2) repairing of gunmetal bush bearing for stage pumps under madhaipur colliery.

CTN :40443658 Due date: 13 Jun, 202513 Jun, 2025 NA
Tender For complete track renewal using contractor's own pqrs machine between loliem and harwada section from kms 484/600 to 515/000 for approximately 27 km length including long chainage of 1.4 km and on bridges but excluding tunnels, points and crossing under the jurisdiction of senior section engineer, karwar section in karnataka state over konkan railway. (rate quoted shall be excluding gst. gst shall be payable as applicable e office file 62408)

CTN :40426022 Due date: 05 Jun, 202505 Jun, 2025 15.00 Lacs
Tender For corrigendum : local maintenance of water supply related work and part supply of municipal council betul - local maintenance of water supply related work and part supply of municipal council betul, 1 1/4 inch pipe cutting, 2 inch pipe cutting, 3 inch pipe cutting, 4 inch pipe cutting, 1 1/4 inch pipe threading and making, 2 inch pipe threading and making, 3 inch pipe threading and making, 4 inch pipethreading and making, valve hole, hand pump pipe vice 1 1/4 inch repair, tee pana making, pipe tee making 3 x 2 inch, pipe tee making 4 x 2 inch, pipe tee making 6 x 2 inch, socket bore, clamp making 100 mm, clamp making 150 mm, clamp making 200 mm, clamp making 250 mm, clamp making 300 mm, clamp making 400 mm, handpump watar chamber cutting, handpump water chamber bore, valve rod complete 3 inch with m.s. checknut, valve rod complete 4 inch with m.s. checknut, valve rod complete 6 inch with m.s. checknut, valve rod complete 8 inch with m.s. checknut, valve rod complete 12 inch with m.s. checknut, valve rod complete 14 inch with m.s. checknut, valve rod complete 6 inch s.s. with checknut, valve rod complete 8 inch s.s. with checknut, valve rod complete 12 inch s.s. with checknut, valve rod complete 14 inch s.s. with checknut, d-joint collar turning cutting 100 mm, d-joint collar turning cutting 150 mm, d-joint collar turning cutting 200 mm, d-joint collar turning cutting 250 mm, d-joint collar turning cutting 300 mm, d-joint collar turning cutting 400 mm, 2 inch valve head sheet hole topping repair, 3 inch valve head sheet hole topping repair, 4 inch valve head sheet hole topping repair, 6 inch valve head sheet hole topping repair, 8 inch valve head sheet hole topping repair, 12 inch valve head sheet hole topping repair, stopper plate lohe ki 50 mm, stopper plate lohe ki 100 mm, stopper plate lohe ki 150 mm, stopper plate lohe ki 200 mm, stopper plate lohe ki 250 mm, stopper plate lohe ki 300 mm, stopper plate lohe ki 400 mm, 60 h.p. water pump bearing no.7311, 61 h.p. water pump bearing no.311, 60 h.p. water pump soft, 60 h.p. water pump oil seal, 60 h.p. water pump long bush, 60 h.p. water pump repairing labour charge, oil 68,90,20/40,320 no., grees castrol no. 80 k, tvs nut bolt 25 x 100 mm, nut bolt 25 x 100 mm, cutter patte, hexa blade, girmit, plastic tuf, pechkas, penchis, hexa frame, filter gear box repair, water tanker ka 5 hp engine repair, water tanker ka 5 hp water pump repair, water tanker wheel axle, water tanker axle bearing, water tanker steel wheel hub, dam gate rubber seals for stop dam 32,75 x 10 mm p type, flat rubber for stop dam 75 x 10 mm, ms flange collar turning cutting 150 mm, ms flange collar turning cutting 200 mm, ms flange collar turning cutting 250 mm, ms flange collar turning cutting 300 mm, ms flange collar turning cutting 400 mm, gun metal nut casting, rubber sheet 06mm-12mm, packing rassi 12 mm, helicon sheet, t square spaner, v-belt, tractor self/dynamo service, motor cupling with rubber, pully pin bush with rubber, febrication work, allen key set (tapariya )

State Government

CTN :40371745 Due date: 16 Jun, 202516 Jun, 2025 3.33 Lacs
Tender For procurement of spares of 25hp and 10hp pumps for drinking system of stps, sarni - supply of spares for 25 hp pump unifilter plant at stps, ph-3 sarni.make b. e. pumps, model-m1024kk, shaft (s.s) with key,nut and half round key, gland check nut p/e (gun-metal), gland check nut f/e (gun-metal), impeller guide bush (gun-metal), bearing bracket p/e (c.l.), bearing bracket f/e (c.l.), impeller (c.l.), tie bolt & nut (ms) m16 x 360 mm, tie bolt & nut (ms) m16 x 44.5 mm, supply of spares for 25 hp pump unifilter plant at stps, ph-3 sarni.make b. e. pumps, model-m1024kk, shaft with matching nut, impeller c.i., bearing bracket (c.i.), suction cover (c.i.), bearing cover (aluminum alloy), gland cap (c.i.)

Central Government/Public Sector

CTN :40328929 Due date: 10 Jun, 202510 Jun, 2025 NA
Tender For casual renewal of rail, points and crossing sleepers and other ancillary track works under the jurisdiction of divisional engineer (north)-ahmedabad.

CTN :40134813 Due date: 19 May, 202519 May, 2025 NA
Tender For bid to ras tender for supply of sprocket drive 12 teeth/4 row , chuck bearing 51134 , mud pump bearing 39581/39520 , bearing 6213 , foot clamp cylinder assy , sprocket driven 30 teeth/4 row , foot clamp pedestal , foot clamp yoke , foot clamp bush left kdr 1000 , foot clamp bush right kdr-1000 , hoisting pulley bearing 405228/324028 , foot clamp stud xdr 100 , amc mud pump crank shaft , oil seal 25-45-8 , oil seal 38-60-10 , bearing 6205 , propeller shaft yoke kdr-1000 , propeller shaft cross kdr-1000 , chain set for chuck drive kdr-1000 , 1 1/2" gate valve (gun metal) , propeller shaft kdr-1000 , air filter set-kdr1000 , feed rope pulley bearing inner 404828 , micro feed valve , amc mud pump piston rod set of 03 , amc pump bucket carrier set of 03 , amc pump valve and valve seat set of 6 , amc pump liner set of 3 , amc mud pump bucket set of 03 , amc mud pump crankshaft bearing 22208 , feed rape pulley bearing 486028 , hydraulic chuck jaw (nc) , lube pump , solenoid switch , hoisting lever cable , tapper roller bearing 82576/82931

Central Government/Public Sector

CTN :40346155 Due date: 12 Jun, 202512 Jun, 2025 NA
Tender For providing covering sheds with and without proflex system, replacement of cover shed, dismentaling of existing mg shed, pannel room, duty room, pathway with hardonate flooring, scrap yard, rail level platform, shuttter of ctrb room, open drain, shower testing system with drainage system, sump etc. and minor p. way works such as lifting of track, shifting of points & crossings, providing points & crossing, track strengthening, ballast supply and related incidental works as required at gandhidham yard in connection with development of infrastructures for freight maintenance at gandhidham yard (phase-ii) of ahmedabad division of western railway.

Central Government And Public Sector

CTN :40299171 Due date: 27 May, 202527 May, 2025 NA
Tender For supply of proof machined gun metal bush on door delivery basis at integrated hbl plant lauriya, west champaran and sugauli, east champaran, bihar.

Central Government/Public Sector

CTN :40245716 Due date: 28 May, 202528 May, 2025 NA
Tender For casual renewal of track sleepers, points and crossing sleepers, bridge sleepers, lc sleepers and guard rails/check rails at various locations and supply of engineering indicator boards to all p.way sections in tpj division.

CTN :40231783 Due date: 26 May, 202526 May, 2025 NA
Tender For spare supply, fitment, installation & testing of set of gear & induction motor of 3 ton eot crane asset no. m000027a reva pvt. company ltd. a) i. wheel gear size: od=120 mm, id=25 mm, gun me tal bush =5 mm thick, number of teeth= 57 nos., qty= 01 nos. make: tata/skf/om engineering or similar. material: c-45 ii. pinion gear length=146.5mm od= 45 mm, id= 24 mm, number of teeth= 22 nos. qty= 0 1 nos. make:tata/skf/om engineering or similar. material: c-45 iii. wheel gear size: od= 168 mm, id= 60 mm, gun metal bush= 5mm thick. number of teeth= 82 nos. qty= 01 nos. make:tata/skf/om engineerin g or similar. material: c-45 iv. shaft gear size: od= 72 mm, id= 30 mm length= 75 mm number of teeth= 22 nos. qty= 01 nos. make:tata/skf/om engineering or similar. material: c-45 v. wheel gear size od= 72 mm, id= 50 mm number of teeth= 22 nos. qty= 02 nos. make:tata/skf/om engineering or similar. materi al: c-45. b) induction motor rating 05 hp, 3 phase, 4 pole, 3.7 kw, rpm 1430 make: crompton greaves/abb /gec or equivalent. qty= 01 nos. with isi certification. c) induction motor rating 0.5 hp, 3 phase, 4 pole, 0. 37 kw, rpm 1350 make: crompton greaves/abb/gec or equivalent. qty= 01 nos. with isi certification. [ w arranty period: 30 months after the date of delivery ]
 Loading, Please wait...

Connect us via What's Up