Latest pole foundation Tenders | Government pole foundation Tenders

State Government

CTN :45562017

22 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of electrical material for grampanchayat pirangut,tal-mulshi, dist-pune - electrical material, 6 sq mm 2 core aluminium wire, 10 sq mm 2 core aluminium wire, 1.5 sq mm 3 core copper flexible, 2.5 sq mm 3 core copper flexible, 1 sq mm 2core copper flexible cable, 2.5 sq mm 2core copper flexible cable, 10 x 4c copper armoured, 16x 4c copper armoured, 50 x 4c alm arm, 2.5 sq mm 2 core alumiium wire, 10 sq mm 2 core armoured cable, 6 sq mm 2 core armoured cable, 4 sq mm wire, 10 x 4c aluminium armoured, 16x 4c aluminium armoured, 9 w bulb, 18 w bulb, 23 w bulb, 30 watt bulb, 40 w bulb, 40 w led street light, 50 w led street light, 60 w led street light, 72w led street light, 100w led street light, 120w led street light, 50 w led flood light, 100w led flood light, 120w led flood light, 150 w led flood light, led light fitting charges on highmast, holder, peddel holder, 32 a mcb s, 32 a mcb d, 16 a mcb s, 16 a mcb d, 63 a mcb s, 63 a mcb d, meter box 12 x12, meter box 18x 24, insulation tape, 33mm gi pipe 2 ft, 40 mm gi pipe 3 ft, single pole mcb box, double pole mcb box, auto timer, puck, hammer, screw driver, screw driver set star, tester, hand gloves 100 am, phase wire copper, cement pole clamp, ms pole clamp, circuit fuase 100 am, circuit fause 63 am, hrc fause puller, single arm bracket, duble arm bracket, three arm street light bracket, switch button, nut bolt, cement screw, single button board, 2 button board, 3 button board, 9 mtr pole, 11 mtr pole, 4 arm bracket, 6 arm bracket, 6 mtr pole, 8 mtr pole, 7 mtr pole, foundation bolt, gi tar, rawal plug, dp switch, tongtester, best quality wireman tool bag, service wire mani, players, bed switch with touch button box, 20 amp mcb with mcb box, digital multimeter, digital clamp meter, countinuty tester, aa battery & aaa battery cell, 5 watt torch, water proof tap box, pvc switch board 8x10, pvc switch board 6x10, pvc switch board 4x7, pvc switch board 4x4, 6 amp socket, 16 amp ss combaine with box, 16 amp switch, 16 amp socket, 32amp fuse, 100amp fuse, 1 inch cesing patti, 3/4 inch cesing patti, 6 amp 3 pin top, 16 amp 3 pin top, screw, 8 mm copper fuse tar, 6 mm copper fuse tar, copper 2 core 1.5 sqmm, drill machine hammer type, 2.5 mm 4 core copper wire, 4 pole mcb, all size ms mcb box, 25amp 30amp 3phase contactor, 4 mm 2 core aluminium armoured, 4 mm 2 core copper armoured, 60 mm 4 core copper armoured, 500 mm dwc pipe, all size aluminium lugs, ss all size lugs, all size cable joint, all size spanner set, l & key set, 16 amp power point, all size moduler plate, square box, 8mm 10 mm fasner, adaptor, remote bell, 3 phase timer, 6 amp switch, 1 inch pvc pipe, 12 watt solar street light, 15 watt solar street light, 18 watt solar street light, shifting of highmast pole, xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 3 core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe, fr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 3 core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe, 1 sq 1 core mm copper wire, 2.5 sq 1 core copper wire, high speed ceiling fan, 200 watt led flood light, sl pole, lt pole, 200 watt led flood light, supplying and erecting triple pole mini feeder pillar with 500v, 200a fpmccb as incomer and 2 outgoing circuits with hrc fuse base and cartridge of 100a with aluminium bus bar erected in 14 swg crca sheet box with supporting angles, self locks, gasket having ip54,ik10 protection and slanting topto be erected on provided foundation complete, supplying, erecting & terminating fr xlpe insulated, galvanised steelformed wire armoured (strip) cable 1100 v, 3 core 240 sq. mm. luminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe, sky lift crane, meter box, supplying, erecting &am

State Government

CTN :45569198

07 Jul, 2026 1.52 Lacs

Multi City - Chhattisgarh

Tender For mill coupling bolt & stud for mill motor foundation with nut & washer

CTN :45470117

22 Jun, 2026 NA

Pune - Maharashtra

Tender For corrigendum : supply of automatic boom barrier auto barrier with brush less motor working voltage , push button and photo cell sensor , cable work included installation commissioning and wiring , cement concrete base foundation digging leveling compaction of cement ratio one two four , ups for power backup one kva

CTN :45537989

24 Jun, 2026 NA

Jaipur - Rajasthan

Tender For annual rate contract (arc) for supply of wpil make pumps spares for various power plants of rvun - ct drain/ slug pump pump sl.no. vbp 30111-114 ,model : e12tc/1 stg, motor rating: 15 kw, speed:1460 rpm for ctpp, chhabra, basket strainer, partno. 1, pipe plug, partno. 2, suction bell, partno. 3, bearing for s/ bell, partno. 4, sand coller, partno. 5, seal ring, partno. 7, impeller, partno. 8, imp. lock collet, partno. 9, bowl, partno. 10, bearing for bowl -ruuber, partno. 11, bearing for bowl -bronze, partno. 12, discharge case, partno. 13, bearing for d/ case, partno. 14, pump shaft, partno. 15, pump shaft coupling, partno. 16, bottom column pipe, partno. 18, bottom line shaft, partno. 19, bearing retainer, partno. 20, line shaft bearing, partno. 21, line shaft coupling, partno. 22, line shaft sleeve, partno. 23, top column pipe, partno. 25, sole plate, partno. 28, base plate, partno. 29, discharge head, partno. 30, head shaft with key, partno. 31, packing box, partno. 32, bearing for pkg box, partno. 33, packing , partno. 34, lantern ring, partno. 35, packing gland, partno. 36, water deflector, partno. 37, 1 tbh assly, partno. 40, motor stand, partno. 41, adjusting nut, partno. 42, flexible coupling, partno. 43, spares for zld pump model : d200-150-500, wpil ref no. ebp 30004-05-i, capacity-310 m3 /hr, total head-80 mtr, motor rating: 110 kw, speed:1484 rpm for ctpp, chhabra, casing, partno. 1, stuffing box cover, partno. 2, impeller, partno. 3, casing wearing ring, partno.4, shaft, partno. 5, sleeve , partno. 6, gland packing, partno. 7, gland lock, partno.8, impeller key, partno.9, coupling key, partno. 10, a/f bearing (d.e.), partno. 11, a/f bearing (n.d.e.), partno. 12, impeller nut, partno. 13, imp. nut lock washer, partno. 14, bearing lock nut, partno. 15, frame adaptor, partno. 16, bearing housing, partno. 17, bearing cover- d.e., partno. 18, bearing cover- n.d.e, partno. 19, adaptor foot, partno. 20, breather , partno. 21, constant level oiler, partno. 22, lip seal-de, partno. 23, lip seal- nde, partno. 24, water thrower, partno. 25, seal ring, partno. 26, gasket for casing, partno. 27, stud, partno. 28, nut for stud, partno. 29, hex. hd cap screw, partno. 30, hex. hd cap screw, partno. 31, hex. hd cap screw, partno. 32, hex. hd cap screw, partno. 33, plug, partno. 35, spares for ds pump, model:- gm12tc, wpil ref. no.: - vj-30091-92, no. of stage: - 6, capacity: - 240 m3/hr, total bowl head: - 70 mtr, speed: - 1480 rpm, motor rating: - 75 kw for ctpp, chhabra, basket strainer, partno. 1, pipe plug, partno. 2, suction bell, partno. 3, bearing for suction bell, partno. 4, sand collar, partno. 5, hex. head cap screw, partno. 6, seal ring, partno. 7, impeller, partno. 8, imp. lock collet, partno. 9, bowl, partno. 10, rubber bearing, partno. 11, bearing for bowl, partno. 12, discharge case, partno. 13, bearing for discharge case, partno. 14, pump shaft, partno. 15, pump shaft coupling, partno. 16, hex. hd. cap screw, partno. 17, bott. column pipe-60" lg, partno. 18, bott. line shaft-60" lg, partno. 19, bearing retainer, partno. 20, line shaft bearing, partno. 21, line shaft sleeve, partno. 22, line shaft coupling, partno. 23, hex. hd. bolt with nut, partno. 24, top column pipe, partno. 25, hex. head cap screw, partno. 26, foundation bolts, partno. 27, sole plate, partno. 28, discharge head, partno. 29, head shaft with key, partno. 30, packing box, partno. 31, packing box bearing, partno. 32, packing, partno. 33, lantern ring, partno. 34, hex. hd cap screw, partno. 35, packing gland, partno. 36, water deflector, partno. 37, hex. hd. bolt with nut, partno. 38, motor stand, partno. 39, thrust brg. hous. assy., partno. 40, adjusting nut, partno. 41, flexible coupling, partno. 42, hex. hd cap screw, partno. 43, pump sl.no. val 30111-12, model : e14tc/4 stg, motor rating: 132 kw, speed:1488 rpm for csctpp, chhabra, basket strainer, partno. 1, pipe plug, partno. 2, suction bell, partno. 3, bearing for s/ bell, partno. 4, sand co

Central Government/Public Sector

CTN :45415236

19 Jun, 2026 NA

Medak-T - Telangana

Tender For corrigendum : cvp foundation items - manhole cover for cvp, discharge pipe cvp, discharge blind flange for cvp, suction embedded part cvp, suction embedded part cvp, motor sole plate cvp, discharge lip for cvp

CTN :45539443

29 Jun, 2026 90.0 Thousand

Thanjavur - Tamil Nadu

Tender For proving and fixing solar powered traffic blinkers of 30cm dia with polycarbonate dome 5mm red of led 150 nos. iri each red blinkers light - 1 no. with red / white / blue led blinkers delineator solar panel : 12v 50w solar panel — 1 no. 12v 18 ah battery -1 no. with box, solar circuit controller board box. straight pole : ms unit rm basic rate approved for the year 2025-2026 (w.e.f. 22.07.2025) 3” dia 2.5mm thick 18 feet height pole (1 no.) with 2 feet under ground pole foundation, pole painting including transportation charges, installation charges etc., complete as per standard specification.

CTN :45501064

02 Jul, 2026 20.00 Lacs

Bikaner - Rajasthan

Tender For notice inviting limited tendernotice no: 01/elect./2026/ 706 date:- 10.06.2026tools & equipments of –electrician trade- heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle, , knife double bladed electrician, , chisel firmer with wooden handle, , grease gun, , (a) crimping tool, , wire cutter and stripper, , hacksaw frame, , tweezers, , drill hand brace, , plane cutters, , smoothing cutters, , file flat rough, , file flat bastard, , file rasp, half round, , the soldering gun, , contactor & auxiliary contacts (rm), , contactor & auxiliary contacts. (rm), , pin type, shackle type, egg type & suspension type insulators including hardware fitting, , portable electric drill machine, , load bank (lamp/heater type), , brake test arrangement with two spring balance rating, , laboratory type induction coil, , series test lamp (rm), , knife switch dpdt fitted with fuse terminals (rm), , knife switch tpdt fitted with fuse terminals (rm), , miniature circuit breaker (rm), , earth plate (rm), , earth electrode (rm), , elcb and rccb (rm), , fuses (rm), , rheostat (sliding type), , capacitors (rm), , various electronic components (rm), , various lamps (rm), , plug socket piano switch lamp, , holder (rm), , cables:, , twisted pair, , non-metallic sheathed cable, , underground feeder cable, , ribbon cable, , metallic sheathed cable multi-, , conductor cable coaxial cable, , direct-buried cable (rm), , rubber mat (rm), , electrician helmet, , rcc pole with accessories (ms angle iron, 'c' clamp, stay insulator etc.) and materials, , quipment, , ohm meter; series type & shunt type, portable box type, , digital multi meter, , a.c. voltmeter m.i. analog, portable box type housed in bakelite case, , milli voltmeter centre zero analog, portable box type housed in bakelite case, , ammeter mc analog, portable box type housed in bakelite case, , ac ammeter mi, analog, portable box type housed in bakelite case, , weight wattmeter analog, , (b) frequency meter (digital), , magnetic flux meter, , tachometer, , tong tester / clamp meter, , megger, , single phase variable auto transformer, , growler, , ac starters: :- -, , f. star delta starter soft starter, , g. auto transformer type, , oscilloscope dual trace, , function generator, , discrete component trainer, , linear i.c. trainer, , digital i.c. trainer, , domestic appliances -, , g. mixture & grinder, , h. washing machine semi-automatic, , i. motor pump set, , oil testing kit, , battery charger, , current transformer, , potential transformer, , 1 5 or 17 computer or latest version, , d.c. shunt generator with control panel, , motor-generator (ac to dc) with control panel, , d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, , dc series motor coupled with spring balance load with control pannel, , dc shunt motor with control pannel, , dc shunt motor with control pannel, , dc compound motor with starter and switch with control pannel, , motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed, , plate, fixing bolts, foundation bolts and flexible coupling., , ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., , ac phase-wound slip ring motor with starter switch, , universal motor with starter/switch, , synchronous motor with accessories like starter, excitation arrangements., , thyristor /igbt controlled d.c., , motor drive with tacho-generator feedback arrangement, , thyristor/igbt controlled a.c. motor drive with, , single phase transformer, core type, air cooled, , three phase transformer, shell type oil cooled with delta/ star, , electrical machine trainer -, , diesel generator set with changeover switch, ov

CTN :45318277

13 Jun, 2026 50.00 Lacs

Godhra - Gujarat

Tender For bid to ras supply of cooling pad 2 feet x 4 feet with fitting , cooling pad frame alluminium 2 feet x 4 feet , water circulation pipe for pad frame , repairing fogger system with fogger and material , green net , insect net , gi profile with installation , zigzag spring with installation 8 mm , fogger with lpd with installation , uv stabilized film , uv stabillized film greennet insect net installation labour , exhaust fan with installation , 15 w solar street ligh system set with installation , 15 w solar street light repering work , motor repairing 1.5hp , 2 hp three phase exhaust fan motor repairing , 2 hp three phase exhaust fan new motor with installation , gi pipe 1.5inch 2 mm thikness with fitting , gi pipe 2inch 2 mm thikness with fitting , repairing of panelboard , 2 core 4 sq cable with fitting , 3 core 4 sq cable with fitting , 4 core 4 sq cable with fitting , fiber or pvc gutter with fitting , temperature controller with fitting , humidity display with fitting , fogging auto controller with fitting , bedsheet 100 micron , fabrication work , electric work , plumbing work upvc pipe and fitting 50 mm , plumbing work pvc pipe and fitting 63 , micro irrigation facility for plantation , micro irrigation facility for hitech nursery , 16 mm lateral with installation , 16 mm inline with installation , 8 lph dripper with fitting , inverted modular sprinkler or fogger sytemt for nursery , installation of foundation pipe pole digging and civil material without pole , hp solar controllar , hp solar motor pump , 545 watt solar panel with fitting , 50 mm10 kg isi hdpe pipe , remove damage uvsheet greennet insecti net profile

State Government

CTN :45397974

18 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

State Government

CTN :45483157

11 Jun, 2026 NA

Mahendragarh-Hr - Haryana

Tender For bhagot block: kanina panchayat: bhagot dist.: mahendragarh annual maintenance work for water supply. - foundation new m.s with hole / foundation for motor pumping machinery make of iron grills, water works, baghot

Pole Foundation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

State Government